Locked Mi9 -- HELP --


Fordlobus

Members
Jun 27, 2017
148
40
Hi all, so I tried to install TWRP EQUULEUS on my new Xiaomi Mi9 8/256 and got in a bootloop.
TWRP Installed fine, I deleted User Data, I had latest weekly rom on "Downloaded Roms" and phone didn´t boot anymore.

Either I put it on fastboot, or goes to Mi-recovery, where I can basically Wipe Data, Reboot or connect with Mi Assistant.

When tried to flash stock global Rom, with MiFlash Tool, apparently locked the bootloader again, so I´m stuck.
My PC doesn´t see the device so I can´t copy a new rom to Downloaded Roms folder,
so I cannot copy the one I downloaded from here: https://en.miui.com/download-361.html

Fastboot commands to try install TWPR again, don´t work and says "Canot erase data on locked ¿device?"

Did I just turn my 600€ mobile into a damn brick?

Help please!
 
How To: Mi-Gerät auf Werkseinstellung mit geschlossenem Bootloader bringen

lade das Tool XiaomiFlashTool herunter. https://www.xiaomigeek.com/download-mi-flash-tool-2017

lade die entsprechende Firmware http://bigota.d.miui.com/V10.2.12.0...AEUXM_20190226.0000.00_9.0_eea_1c4053f6f6.tgz für dein Smartphone herunter. Und dann mit mit WinRAR entpacken.

installiere XiaomiFlashTool und die angezeigten Treiber nach Start des Tools.

entpacke die Firmware (ZIP-Archiv) und navigiere mit dem XiaomiFlashTool ins entpackte Verzeichnis

schließe dein Mi-Gerät an und versetze es ins Fastboot (10 Sekunden auf Power On/Off + Vol Down bei ausgeschaltetem Zustand

das Tool sollte das Mi-Gerät erkennen. Nun kannst du anfangen zu flashen



Gesendet von meinem Mi 9 SE mit Tapatalk
 
Last edited:
How To: Mi-Gerät auf Werkseinstellung mit geschlossenem Bootloader bringen

lade das Tool XiaomiFlashTool herunter. https://www.xiaomigeek.com/download-mi-flash-tool-2017

lade die entsprechende Firmware http://******.d.miui.com/V10.2.12.0...AEUXM_20190226.0000.00_9.0_eea_1c4053f6f6.tgz für dein Smartphone herunter. Und dann mit mit WinRAR entpacken.

installiere XiaomiFlashTool und die angezeigten Treiber nach Start des Tools.

entpacke die Firmware (ZIP-Archiv) und navigiere mit dem XiaomiFlashTool ins entpackte Verzeichnis

schließe dein Mi-Gerät an und versetze es ins Fastboot (10 Sekunden auf Power On/Off + Vol Down bei ausgeschaltetem Zustand

das Tool sollte das Mi-Gerät erkennen. Nun kannst du anfangen zu flashen



Gesendet von meinem Mi 9 SE mit Tapatalk
Hi!!
Thanks for the help. The second link has some ****** and does not work. What is after http:// ?
When I flash, on the bottom of the screen, which option should I select? Clear all?

Thank you!!