MIUI 12.0 MIUI 12.0/12.1/12.2/12.5 STABLE RELEASE


Do you like this MIUI version?


  • Total voters
    4,215
Status
Not open for further replies.
Up, I've seen those files too, but I did not know what they are for.



Sent from my Mi MIX 3 using Tapatalk
 
It's late... I'd rather watch some snooker.
I'll give it a go these days.
And I'll let you / the thread know how it goes.

On another topic.
I just found out that both the cameras actually work. One is a normal one, one is a tele one.


Sent from my Mi MIX 3 using Tapatalk
 
It's late... I'd rather watch some snooker.
I'll give it a go these days.
And I'll let you / the thread know how it goes.

On another topic.
I just found out that both the cameras actually work. One is a normal one, one is a tele one.


Sent from my Mi MIX 3 using Tapatalk
Yea, you can try some other time when it's convenient for you.

On another topic.
All the cameras work, but you can't take pictures with the other 2MP front camera because it's used for depth sensing
 
It does not work.

The device is shown into adb devices.
The reboot command goes trough.
The guy with the hat comes on.
The flash recovery command does not go trough.

I disconnect the phone, long press the power button and the phone reboots into Android.

And the video of the procedure.

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.



Sent from my Moto Z3 Play using Tapatalk

Do you use AMD Ryzen or is USB port v3.0?
If yes Ryzen, find fix on XDA. If is port 3.0 i dont know fix, i think on XDA you find too.

Good luck..

PS.
Make sure the bootloader is unlocked. If everything is fine, you can temporarily upload TWRP and install it after using the command below:

fastboot boot recovery_filename.img

Ref.
LineageOS Wiki

Or try enter on fastboot by butons...
 
Last edited:
Intel 10th Gen.
And yes USB 3.0
I'll try first the Qualcomm drivers posted above.

Sent from my Moto Z3 Play using Tapatalk
 
Glad you know now.
Just install (and maybe reboot your PC)
And try d fastboot commands again


so.
NOPE
i installed the Qualcomm drivers.
rebooted the laptop.
i get stuck at <waiting for any device>

i changed the USB 3 port with the USB C
i can see the phone on adb devices
i can send the reboot to bootloader command
the bootloader starts (the guy with the hat)

if i give the flash command... nothing.
if i give the command mentioned above fatboot boot twrp.img... nothing....

so no luck. :p

i shall try my wifes laptop. an older one with USB 2
 
The same on my wife's laptop.
I've tried 2 cables. The original MiMix3 one. And another one.


Sent from my Moto Z3 Play using Tapatalk
 
When the note 9 pro global will get android 11?
And plz add more mi apps like shareme and mi remote and if u can always on display support for note 9 pro
 
so... it does not work
i've installed the qualcomm drivers
i've installed xiaomi drivers (with a RED warning upon installing)
the phone is visible in device manager
33128


the pone is visible on fastboot devices command

but as i give th flash command... i get this error


33127
 
Thnx bro what about the other apps n the upgrade to android 11 when it will be available
RULES WHEN POSTING
1. If a ROM is not published DONT ASK ABOUT ITS ETA
2. If a ROM is not published DONT ASK why!
You should really read the rules. Anyway, a quick browse on the net shows only the Indian ROM for Note 9S/Note 9 Pro (curtana) has Android 11. You just have to be patient and hope Xiaomi sends out an update for the other regions for the team here to work with. Have no answer for the apps.
 
Use USB 2.0 port. If you don't have any USB 2.0 port on your computer, buy and use a "USB 2.0 hub". ;)



I'll give that a go!
But I switched to usb 3 a long time ago.
I gave all my hubs to family members, 250 kms away.

Sent from my Moto Z3 Play using Tapatalk
 
Use USB 2.0 port. If you don't have any USB 2.0 port on your computer, buy and use a "USB 2.0 hub". ;)

progress.

it turns out that my current USB-C hub has 2 - USB 3 ports, - 2 - USB 2 PORTS, one USB-C port and wireless charging.


33130


now how do i make it STICK?

i managed to boot into recovey.

will it STICK? or after i flash de xaiomi.eu ROM i have to repeat the procedure for installing TWRP?
 
progress.

it turns out that my current USB-C hub has 2 - USB 3 ports, - 2 - USB 2 PORTS, one USB-C port and wireless charging.

now how do i make it STICK?

i managed to boot into recovey.

will it STICK? or after i flash de xaiomi.eu ROM i have to repeat the procedure for installing TWRP?
It "stick" if you install xiaomi.eu ROM, yes. ;)
 
i did...
i configured it without the Google Services (no Google account provided yet)
first impresions comparing it to the Global...
to much chinese content in the Themes Store.
unable to download themes without logging into some kind of an account.
i'll give it a few days (and side-install my apps for video editing) to see how it runs.
 
Last edited:
Hi.. Thank you very much for this wonderful ROM.. My RN8 has never been more responsive.. Although I have a problem with getting root.

I came from a Locked Bootloader and so far everything is great until I decided to root it.

I can't flash Magisk 17.0 returning an error:
! Boot image patched by unsupported programs
! Please restore stock boot image

Should I rooted first before flashing the ROM? How do I go about this?
 
Last edited:
Hi.. Thank you very much for this wonderful ROM.. My RN8 has never been more responsive.. Although I have a problem with getting root.

I came from a Locked Bootloader and so far everything is great until I decided to root it.

I can't flash Magisk 17.0 returning an error:
! Boot image patched by unsupported programs
! Please restore stock boot image

Should I rooted first before flashing the ROM? How do I go about this?
Hello,

Please install latest Magisk version. ;)

Latest Stable is 20.4 (for Android 10 and below) =>
:)
 
  • Like
Reactions: xcraft02
Hello,

Please install latest Magisk version. ;)

Latest Stable is 20.4 (for Android 10 and below) =>
:)
Thank you. It went thru but, why is this so different lol..

I had my wife's Redmi 5 Plus installed with MIUI 11 EU ROM and rooted with Magisk.. All banking apps works on her phone..

Why in mine, nothing works? I already hid Magisk..

Update: My bad, I forgot to actually select the banking apps to hide Magisk from.

Only one app is not working but I guess Magisk can't do anything about it.

Update 2: So it's the app. It accesses Internal Memory and look for "TWRP" folder. Just have to delete it.
 
Last edited:
  • Like
Reactions: Poney70
Hi guys,
I wanted to install a custom ROM (xiaomi.eu stable) on my Mi 10T lite, but I can't find TWRP for him. Is there another way to install it? Thank you in advance.
 
Last edited:
Status
Not open for further replies.

Similar threads

  • Locked
HyperOS 1.0 24.3.4
Replies
150
Views
42K
  • Locked
HyperOS 1.0 24.2.26
Replies
161
Views
49K