hi, i need some help! I jae a xioami mi6 and everything was ok but, since i updated do the global rom 8.5.0.1, the phone crashes mostly when running aps and then it reboots for itself. It Works fine for a few hours a day but then that keeps happening. anyone can help me?
New Mi6 Apps Crashing Then Phone Reboots
- Thread starter TiltedMain
- Start date
am i able to do it with the phone locked? and now i have another problem, i cant start the phone. i thing the system crashed or something.
Last edited:
u have to unlock your bootloader first
why you try to reset factory setting all first
as long u applied unlock bootloader
it's easier to flash rom to if your phone unlock bootloader to handle firmware
why you try to reset factory setting all first
as long u applied unlock bootloader
it's easier to flash rom to if your phone unlock bootloader to handle firmware
first of all thanks. i have one big problem at the moment. I have tried to flash my phone using xiaomi tool and for some reason it didnt work and now i can´t acces to my phone. it keeps restarting when the mi logo shows, the only thing i have access is the recovery mode and fastboot mode. is there any way i can flash my phone from this point?
no access to the phone
i can only enter recovery mode and fastboot mode
phone locked.
Thanks again, i´ll wait for na answer if you have.
no access to the phone
i can only enter recovery mode and fastboot mode
phone locked.
Thanks again, i´ll wait for na answer if you have.
Home
Guides and Tips
[GUIDE] HOW TO FLASH MIUI ROM ON XIAOMI MI6
FREDERICK JEROMEMAY 21, 20175703 VIEWS
GUIDES AND TIPS1 COMMENT5703 VIEWS 6
Advertisement
In this post we will show different methods on how you can flash or update your Xiaomi Mi6 with new MIUI ROM version. Pay attention that you must have all required drivers installed on your PC or laptop. Check out this post for Xiaomi Mi6 drivers.
Complete guide on flashing Xiaomi Mi6 with MIUI ROM
Flash Xiaomi Mi6 with MiFlash Tool
Flashing with locked bootloader
Use this flashing method if you don’t have official unlock permission from MIUI, or you can’t unlock bootloader on your Xiaomi Mi6 device using the standard method. The difference is that with locked bootloader you need to use EDL (emergency download mode), while with unlocked bootloader you can use fastboot mode.
How to boot Xiaomi Mi6 into EDL Mode
Note that while your device is in EDL mode doesn’t show any signs of life.
After you’ve booted your Mi6 device in download mode, you should see Qualcomm HS-USB QLoader 9008 in device manager.
BOOT XIAOMI MI6 INTO EDL WITH UNLOCKED BOOTLOADER
First method: Connect your device to PC and find it in device manager. Open notification bar and tap on “Connected in charging mode”, then select “Transfer files (MTP) mode”. Device manager will update the list of connected devices. Now enable “Developer options”. Go to “Settings” > “About Phone” > and tap seven times on “MIUI version”. After you’ve enabled developer options, go back to settings and select “Advanced settings” > “Developer options”. Enable “USB debugging”. Open command prompt and test if your device connected successfully. In command prompt type:
adb devices
The phone will display “Allow debugging from this computer?” message. Confirm by pressing OK. In the command prompt you’ll see “List of devices attached” and unique device number. Next type:
adb reboot edl
Your device should reboot into download mode. If it simply reboots in system, then this method doesn’t work for you. This is pretty much ok, just continue to another method.
Fastboot method: Boot Xiaomi Mi6 in fastboot mode. Enable “USB debugging” and in command prompt type:
adb reboot bootloader
Your device should reboot into fastboot mode. Another method to boot into fastboot mode is to turn off your device. Press “Power” and “Volume down” button. After you’ve started your device in fastboot mode, type:
fastboot oem edl
Your device will boot in EDL. Remember you should have unlocked bootloader to use this method. If you don’t have unlocked bootloader you can try using engineering cable, but MIUI disabled this method on newest ROM versions.
Download Stable fastboot ROM and unpack into “C:\fastb” or any other folder with similar name. Let’s continue with flashing our Xiaomi Mi6 device. Start MiFlash.exe as administrator and press “Refresh”. COM port number is not very important, but remember to connect your device only to rear USB ports.
In MiFlash press “Select” or “Browse” (in older versions) and locate the folder with downloaded ROM files. Click “Flash” to start flashing. The flashing process should start, it will take around 5 minutes. After flashing is completed you’ll see “The operation is completed successfully” message or similar. Now disconnect your device from PC and hold power button until you’ll see Mi logo. First startup will take longer than usual.
Pay attention! If you’re flashing to Weekly or Developer MIUI ROM, you’ll most probably get hardbrick or bootloop device, engineering (deep flash) cable isn’t working no more, EDL mode also isn’t working, here’s an solution for you:
Start Xiaomi Mi6 in fastboot mode.
How to boot Mi6 in fastboot mode
Guides and Tips
[GUIDE] HOW TO FLASH MIUI ROM ON XIAOMI MI6
FREDERICK JEROMEMAY 21, 20175703 VIEWS
GUIDES AND TIPS1 COMMENT5703 VIEWS 6
Advertisement
In this post we will show different methods on how you can flash or update your Xiaomi Mi6 with new MIUI ROM version. Pay attention that you must have all required drivers installed on your PC or laptop. Check out this post for Xiaomi Mi6 drivers.
Complete guide on flashing Xiaomi Mi6 with MIUI ROM
Flash Xiaomi Mi6 with MiFlash Tool
Flashing with locked bootloader
Use this flashing method if you don’t have official unlock permission from MIUI, or you can’t unlock bootloader on your Xiaomi Mi6 device using the standard method. The difference is that with locked bootloader you need to use EDL (emergency download mode), while with unlocked bootloader you can use fastboot mode.
How to boot Xiaomi Mi6 into EDL Mode
Note that while your device is in EDL mode doesn’t show any signs of life.
After you’ve booted your Mi6 device in download mode, you should see Qualcomm HS-USB QLoader 9008 in device manager.
BOOT XIAOMI MI6 INTO EDL WITH UNLOCKED BOOTLOADER
First method: Connect your device to PC and find it in device manager. Open notification bar and tap on “Connected in charging mode”, then select “Transfer files (MTP) mode”. Device manager will update the list of connected devices. Now enable “Developer options”. Go to “Settings” > “About Phone” > and tap seven times on “MIUI version”. After you’ve enabled developer options, go back to settings and select “Advanced settings” > “Developer options”. Enable “USB debugging”. Open command prompt and test if your device connected successfully. In command prompt type:
adb devices
The phone will display “Allow debugging from this computer?” message. Confirm by pressing OK. In the command prompt you’ll see “List of devices attached” and unique device number. Next type:
adb reboot edl
Your device should reboot into download mode. If it simply reboots in system, then this method doesn’t work for you. This is pretty much ok, just continue to another method.
Fastboot method: Boot Xiaomi Mi6 in fastboot mode. Enable “USB debugging” and in command prompt type:
adb reboot bootloader
Your device should reboot into fastboot mode. Another method to boot into fastboot mode is to turn off your device. Press “Power” and “Volume down” button. After you’ve started your device in fastboot mode, type:
fastboot oem edl
Your device will boot in EDL. Remember you should have unlocked bootloader to use this method. If you don’t have unlocked bootloader you can try using engineering cable, but MIUI disabled this method on newest ROM versions.
Download Stable fastboot ROM and unpack into “C:\fastb” or any other folder with similar name. Let’s continue with flashing our Xiaomi Mi6 device. Start MiFlash.exe as administrator and press “Refresh”. COM port number is not very important, but remember to connect your device only to rear USB ports.
In MiFlash press “Select” or “Browse” (in older versions) and locate the folder with downloaded ROM files. Click “Flash” to start flashing. The flashing process should start, it will take around 5 minutes. After flashing is completed you’ll see “The operation is completed successfully” message or similar. Now disconnect your device from PC and hold power button until you’ll see Mi logo. First startup will take longer than usual.
Pay attention! If you’re flashing to Weekly or Developer MIUI ROM, you’ll most probably get hardbrick or bootloop device, engineering (deep flash) cable isn’t working no more, EDL mode also isn’t working, here’s an solution for you:
- Download Chinese version of Mi PC Suite.
- Boot your device in Recovery mode (turn off Xiaomi Mi6 and press and hold “Volume up” and “Power” button).
- You’ll see 3 buttons with Chinese symbols. Press the last one (third) and you’ll device icon.
- Run Mi PC Suite, connect your device to PC. You should see a pop-up window with one single button. Click on it.
- Next you’ll see a window with your currently installed ROM version.
- Now press the first button and select ROM file you want to flash (Important! You can’t flash Global Stable or Developer ROM, you’ll get an error).
- Download China Stable ROM. Select it.
- The ROM version will be checked, if everything is fine you’ll see green message, this means everything is ok.
- Press the first button. On your PC you’ll see a progress bar and 0% (it won’t move). On your mobile device you’ll also see a progress bar.
- Wait around 10-15 minutes, your device will automatically boots into system.
Start Xiaomi Mi6 in fastboot mode.
How to boot Mi6 in fastboot mode
- Your Xiaomi Mi6 will be identified in device manager.
- Download Stable fastboot ROM and unpack into “C:\fastb” or any other folder with similar name.
- Start MiFlash.exe as administrator and press “Refresh”. Remember to connect your device only to rear USB ports.
- In MiFlash press “Select” or “Browse” (in older versions) and locate the folder with downloaded ROM files.
- Click “Flash” to start flashing. The flashing process should start, it will take around 5 minutes.
- After flashing is completed you’ll see “The operation is completed successfully” message or similar.
- Now disconnect your device from PC and hold power button until you’ll see Mi logo. First startup will take longer than usual.
Last edited:
Similar threads
