Do you have any idea what caused this problem?
Are you sure the battery is full? Try recharging it for a night.
Did you update the bootloader to a newer version or did you replaced your bootloader by another one (not Xiaomi MiPad)?
If the last one is the case there won't be no way to restore your MiPad without a JTAG.
If you get any connection with your device dd could be working.second....(
and as you can dd if=bootloader.bin of=/dev/bus/1/usb/14 ???
there are instructions for JTAG?
If you get any connection with your device dd could be working.
JTAG is a device that can flash your device without a bootloader.
The thing is that getting a JTAG is not easy, Xiaomi will probably use it if you send it for repair.
Where is the closest repair center Xiaomi that can unbrick? I live in Moscow, Russia. I can't find (who can unbrick)If you get any connection with your device dd could be working.
JTAG is a device that can flash your device without a bootloader.
The thing is that getting a JTAG is not easy, Xiaomi will probably use it if you send it for repair.
Reflashing stock Rom with the miphone pc program doesnt work, i suppose!What to do?
Device Manager:
NVIDIA USB Boot-recovery driver for Mobile devices
Nvflash started
uid read failed
on device flash red led.
no recovery, no fastboot...black screen only.
nothing I can do((((((((
I installed WSM Tools. it was possible to leave everything as usual(/system)...about you cwm something like this, I chose. it was a warning brick, after a reboot it stopped...to enter fastboot, recovery and invisible in the system until charged the battery, if you disable the battery it is seen as NVIDIA USB Boot-recovery driver for Mobile devices(a few seconds) miflash it sees and all 0000000.Can you enlighten us why did even think about flashing bootloader? What for? And what tools and files did you use?
Wysłane z mojego MI 4W
by accident, I thought that will be established clockworkmod recovery.What in the world did you do that for? Geez, this is a brand new device, one should never go modding past the level of the bootloader maybe unlocking it but thats about it! Anyway what was the purpose?
I will try. Thank you. But not sure something will work out . never sets in fastboot mode. but miflash see it , the only cannot nothing to send, writes "device busy")Reflashing stock Rom with the miphone pc program doesnt work, i suppose!
i use it a couple of time for flashing the mi3, not sure it works on mipad as well?
Since your out of fastboot! i think it wont work! as this uses fastboot..
this program:http://bigota.d.miui.com/tools/MiPhone2.11.6.exe
here are the roms:
http://www.miui.com/thread-1666183-1-1.html use a fastboot version
I tried different....but if you have a different one driver, please give the link.((не заходит в(no fastboott))he even does not vibrate, when connecting, turn on, off.)Hurm, maybe similar to me. I tried the Miphone software. It did not recognise my mipad until i change to generic android driver and then it recognised by it cannot flash the rom to the mipad.
What did i do is that boot to fastboot, extract all the fastboot version of the rom, and double click the flash.bat, and the rest..my mipad boot again.
Try to change to generic usb driver if it help...
but if he screwed up the bootloader, hes gonna be out of luck i believe! too bad for messing up a great device..the main thing is now for you to be able to boot to fastboot. if that succeed, everything will be ok
We use essential cookies to make this site work, and optional cookies to enhance your experience. Cookies are also used for ads personalisation