Mi 10 pro - After uploading Xiaomi.eu, the phone turns off


mini21

mini21

Members
Dec 23, 2017
28
15
Good day.
I have a problem with Mi 10 Pro. I wanted to install Xiaomi.eu but something is going wrong.
I unlocked the bootloader, flast TWRP twrp_cmi.img to device.
Then I boot in TWRP and do a factory reset.
Next I click "Istall" and file with rom.
When finish - i click "wipe davlik/cache".

When the device restarts, I see the Mi logo for a moment, then turn off.

I do not know what to do...

In previous phones I had no problem (Mi Max 2, Mi 9t Pro).

Plese help!
 
  • Like
Reactions: alexlasta
mini21 said:
Good day.
I have a problem with Mi 10 Pro. I wanted to install Xiaomi.eu but something is going wrong.
I unlocked the bootloader, flast TWRP twrp_cmi.img to device.
Then I boot in TWRP and do a factory reset.
Next I click "Istall" and file with rom.
When finish - i click "wipe davlik/cache".

When the device restarts, I see the Mi logo for a moment, then turn off.

I do not know what to do...

In previous phones I had no problem (Mi Max 2, Mi 9t Pro).

Plese help!
Click to expand...

You need to format and reinstall the rom

Enviado do meu Mi 10 através do Tapatalk
 
Try 3 times.
Always something wrong.

Wysłane z mojego Mi 10 Pro przy użyciu Tapatalka
 
Can you provide a link to the guide step by step with links to what to download?

Wysłane z mojego Mi 10 Pro przy użyciu Tapatalka
 
Quick question, did you actually wait for it to boot?

assuming you did the following:
"Format data" in twrp
Flash rom
Flash magisk (optional)
Reboot

it is normal for the phone to take a while to boot. And seeing a black screen is also normal do that and wait like 5 minutes (feels like ages i know) and then you should see the miui and 5g colored logo
 
B!GBOY said:
Quick question, did you actually wait for it to boot?

assuming you did the following:
"Format data" in twrp
Flash rom
Flash magisk (optional)
Reboot

it is normal for the phone to take a while to boot. And seeing a black screen is also normal do that and wait like 5 minutes (feels like ages i know) and then you should see the miui and 5g colored logo
Click to expand...

Of course I was waiting :)
This is not the first time I upload xiaomi.eu (it was already on Redmi 4x, Redmi 6, Mi Max 2, Mi 9t Pro ...).
Only that for the first time so far it was necessary to do "format data".

In the guide on Miui Polska I did not find information about the need to format data - and that's probably why the problem occurred.

I'm just surprised that there is a newer version available (Miui 12) than here.
 
mini21 said:
Of course I was waiting :)
This is not the first time I upload xiaomi.eu (it was already on Redmi 4x, Redmi 6, Mi Max 2, Mi 9t Pro ...).
Only that for the first time so far it was necessary to do "format data".

In the guide on Miui Polska I did not find information about the need to format data - and that's probably why the problem occurred.

I'm just surprised that there is a newer version available (Miui 12) than here.
Click to expand...

if twrp cannot decrypt your data and you flash something it won't boot. that's why the first time you have to format data.
also when you go to twrp it will ask you for your lockscreen code which is used for decryption, if you skip that and don't enter the code it also won't be able to decrypt the data

The version available on miui polska is also 20.5.24 they even link to the same files from xiaomi eu
 
@mini21

Do you have the Chinese variant of the Mi 10 Pro?
I had the exact same issue and had to revert to the latest stable Miui 11
 
beefy76 said:
@mini21

Do you have the Chinese variant of the Mi 10 Pro?
I had the exact same issue and had to revert to the latest stable Miui 11
Click to expand...

No, I had the EU version with a slot for 1 sim card.
In the guide I used there was a command to type in fastboot - formatting memory that just didn't work.
When I did it manually - all worked.
 
mini21 said:
Good day.
I have a problem with Mi 10 Pro. I wanted to install Xiaomi.eu but something is going wrong.
I unlocked the bootloader, flast TWRP twrp_cmi.img to device.
Then I boot in TWRP and do a factory reset.
Next I click "Istall" and file with rom.
When finish - i click "wipe davlik/cache".

When the device restarts, I see the Mi logo for a moment, then turn off.

I do not know what to do...

In previous phones I had no problem (Mi Max 2, Mi 9t Pro).


Пожалуйста, помогите![/ЦИТАТА]аА
ИШИП
Click to expand...
mini21 said:
Good day.
I have a problem with Mi 10 Pro. I wanted to install Xiaomi.eu but something is going wrong.
I unlocked the bootloader, flast TWRP twrp_cmi.img to device.
Then I boot in TWRP and do a factory reset.
Next I click "Istall" and file with rom.
When finish - i click "wipe davlik/cache".

When the device restarts, I see the Mi logo for a moment, then turn off.

I do not know what to do...

In previous phones I had no problem (Mi Max 2, Mi 9t Pro).

Plese help!
[/ЦИТАТА]
alexlasta@mail.ru
write everything explain
Click to expand...
 
alexlasta said:
I unlocked the bootloader, flast TWRP twrp_cmi.img to device.
Then I boot in TWRP and do a factory reset.
Next I click "Istall" and file with rom.
When finish - i click "wipe davlik/cache".
Click to expand...

If you've read the posts before yours you would have your answer!
"Format data" after installing twrp
 
  • Like
Reactions: Mali2 and LOLO9393
Hello fellow Xiaomi.eu fans!

It looks like I'm struggling to install miui.eu on my new umi (Mi10).
I have unlocked it today with the official unlock tool.

I saw a few guides on how to install, but all of them failed for me. (I looked here in the forums, also on xda and googled a bit as well)
Most of the guides suggested that you should FORMAT data not just wipe it before the installation.

Well, I did that. I tried:
- Installing the official Global rom --> install twrp via fastboot --> format data --> reboot recovery --> copy zip and install xiaomi.eu rom --> reboot
- Installing the official Global rom --> install twrp via fastboot --> reboot recovery --> copy zip and install xiaomi.eu rom --> format data --> reboot

So basically I tried formatting the data partition before and after the zip installation, as one guide suggested this, and another one that.

None of them worked.
Also, I tried the same process with different recoveries:
TWRP-3.4.1b-0218 --> for this I installed a vbmeta.img file as well as the guide suggested
twrp-umi-3.3.1-4
twrp-umi-3.4.0-5

No matter what I do, I always get back to the recovery after a reboot.
Do you have any suggestions?

Any help would be much appreciated.
Thanks and good luck with your installs!
 
You're probably making some confusion.
Xiaomi's official global roms (with tgz extension to be unzipped with Winzip or Winrar in your Pc ) can and must be installed only with the Mi flash application via PC (cell in Fastboot mode).
Modded roms (like Xiaomi Eu with zip extension not to be unzipped but fully copied to the cell) must be installed only through TWRP on the mobile phone.
 
it's actually pretty simple.
you install twrp in fastboot via
Code: 
fastboot flash recovery <image.img>
boot to recovery
format data from wipe menu
install xiaomi.eu ROM zip
reboot

note:
in case you did something else and messed up something:
use xiaomi flashtool and install a xiaomi stock rom (called fastboot rom) and then do the above
 
newgolfer said:
You're probably making some confusion.
Xiaomi's official global roms (with tgz extension to be unzipped with Winzip or Winrar in your Pc ) can and must be installed only with the Mi flash application via PC (cell in Fastboot mode).
Modded roms (like Xiaomi Eu with zip extension not to be unzipped but fully copied to the cell) must be installed only through TWRP on the mobile phone.
Click to expand...

Yes, I know this. I needed to re-flash the global rom via mi flash after each attempt, because of twrp bootlooping.
Then, I reinstalled twrp via fastboot. Then I tried to format data and install xiaomi.eu from twrp.
Since then I also tried TWRP-3.4.1b-3013 as well, with the same result: twrp bootloop after xiaomi.eu zip install.
 
Bro start process .reinstall global rom and lock bootloader to Fix all.them unlock boot and reinstall twrp and install xiaomi.eu ROM .
 
*spam*paid*service* said:
Bro start process .reinstall global rom and lock bootloader to Fix all.them unlock boot and reinstall twrp and install xiaomi.eu ROM .
Click to expand...

I tried this as you suggested.
clean all and lock -> flashed official global rom
unlocked the bootloader again
installed twrp again
format data
installed xioami.eu miui 12 stable for mi10
twrp bootloop...
I'm quite lost at this point.
 
szmarci89 said:
I tried this as you suggested.
clean all and lock -> flashed official global rom
unlocked the bootloader again
installed twrp again
format data
installed xioami.eu miui 12 stable for mi10
twrp bootloop...
I'm quite lost at this point.
Click to expand...
format data AGAIN and reboot system.
 
newgolfer said:
The link refers to the MI 10 and he has an MI 10 Pro.
So you put him in trouble
[/CITAR]
I thought he had mi 10, I see that he didn't answer either
for the mi 10 pro.
androidfilehost.com

AndroidFileHost.com | Download GApps, Roms, Kernels, Themes, Firmware and more. Free file hosting for all Android developers.

Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com androidfilehost.com
Thank you


androidfilehost.com

AndroidFileHost.com | Download GApps, Roms, Kernels, Themes, Firmware and more. Free file hosting for all Android developers.

Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com androidfilehost.com
Click to expand...
 
Last edited:
  • Like
Reactions: newgolfer
Hey guys,

Thank you for your help! I'm running miui 12 stable now.
Sorry for not answering, I didn't have time to try things out.
What I did differently this time is that I didn't actually install twrp.
I just booted into twrp from fastboot, installed the xiaomi.eu rom and wiped dalvik/art cache after the install.
Then I selected boot into system but it booted into the standard miui recovery, where I wiped the data partition.
After this, it actually booted in properly. :)
I think twrp couldn't format the data partition for me for some reason I couldn't find out.

Thanks again!
 
Hi All.
I have problem again.

Something wrong will going on when i install a update (magisk not work) and i want back to to the previous rom.

When I tried to make a format, I got a message:
Failed to mount "/data" (Success).

When I Want to Wipe only data - is the same.
When I want to Repair and change the /data film system to other - the same information.

Now I dont know what have to do.
 
mini21 said:
Hi All.
I have problem again.

Something wrong will going on when i install a update (magisk not work) and i want back to to the previous rom.

When I tried to make a format, I got a message:
Failed to mount "/data" (Success).

When I Want to Wipe only data - is the same.
When I want to Repair and change the /data film system to other - the same information.

Now I dont know what have to do.
Click to expand...

the best way is to return stock flashing the fastboot rom image, than install the TWRP via fastboot, than format data un recovery and finally flashing the Eu rom zip
 
You must log in or register to reply here.

Similar threads

K
Airplane mode without turning off wifi and bluetooth
Replies
0
Views
241
Questions & Answers
kalafiornia_aeroplan
K
L
New Weird Power issue with Mi 10 Lite
Replies
1
Views
936
Bugs
DMerces
D
J
Apps start by themselves when I turn on the phone
Replies
0
Views
242
Questions & Answers
jhernaez2004
J
E
Xiaomi redmi note 10 pro stuck in boot loop
Replies
3
Views
6K
Xiaomi Mi 10/Pro /10Lite/Ultra/10T/Pro/Lite/10S
xiaomantou
xiaomantou
U
Phone won't boot after changing theme
Replies
0
Views
1K
Redmi Note 11 / Pro / 11EPro / POCO X4 Pro5G
Uoistr
U
Top Bottom
Back