MIUI 12.0 MIUI 12 STABLE RELEASE


Do you like this MIUI version?

  • Total voters
    4,215
Status
Not open for further replies.
Heldwin said:
Ok i try again with new flash stable china because i can't boot in recovery (FAILED (remote: Failed to load/authenticate boot image: Load Error))
Click to expand...
This FAILED message generally means your device is bricked... :(

Hoping you can recover it (without paying an EDL Unbrick service). :)
 
Poney70 said:
This FAILED message generally means your device is bricked... :(

Hoping you can recover it (without paying an EDL Unbrick service). :)
Click to expand...
Yes with XiaomiFlash and stable 12.5 it's work i'm on the recovery, flash in progress and format data after :)

Edit : Same Issue stuck in fastboot mode :/
 
Why don't you flash a recovery suggested by @Poney70 and then flash XEU ROM through it. The recovery should also flash the boot.img and save your phone.

Послато са Mi 10 помоћу Тапатока
 
m@c|-|oR said:
Why don't you flash a recovery suggested by @Poney70 and then flash XEU ROM through it. The recovery should also flash the boot.img and save your phone.

Послато са Mi 10 помоћу Тапатока
Click to expand...
I try with suggested recovery and have onyl black screen can't do nothing

Edit : Always same issue stuck in fastboot mode. I try to take older build and flash boot OK and flash 12.5 stuck fastboot :/
 
Last edited:
I'm not quite happy with the latest update 12.5 for K20 Pro, but i understand it's not an issue caused by the Xiaomi EU team but rather Xiaomi themselves.

I have a question to ask though : How can i enable the blurry search bar on homescreen? It was blurred for me only for a couple of seconds on the first boot and then it reverted to the old one from Miui 12.


Thanks in advance.
 
There's a FASTBOOT version for Poco F3 but it's old is there a way to install the FASTBOOT one and then update it to the newest version inside the phone or must it be done via TWRP because I'd like to install this ROM without the need of TWRP
 
OneManArmy said:
There's a FASTBOOT version for Poco F3 but it's old is there a way to install the FASTBOOT one and then update it to the newest version inside the phone or must it be done via TWRP because I'd like to install this ROM without the need of TWRP
Click to expand...
NO!
 
Hi,
Just to Thanks the Xiaomi EU Team!


RedMi Note 7 Pro | CN Version
Latest EU Stable 12.5.1
OrangeFox 11.1


Perfect!!

--

Research time about: How to update



Thank you
 
Has anyone had any issues with Mi Fit on 12.5?

I find that my mi band 4 keeps disconnecting from my phone despite Bluetooth always being on. Also did all the steps for battery saver, auto start, and locking Mi Fit to recents.

Didn't have this issue on the final Android 10 firmware for Poco X3 NFC. Not sure if it's an A11 or MIUI 12.5 thing.
 
Heldwin said:
I try with suggested recovery and have onyl black screen can't do nothing

Edit : Always same issue stuck in fastboot mode. I try to take older build and flash boot OK and flash 12.5 stuck fastboot :/
Click to expand...
There is a procedure, search in Mi8se device, something like: should be flashed android 9 china rom, then flash twrp for A9, then install the xiaomi.eu version, format data, then install newer twrp, and finally reboot to system

Sent from my M2007J20CG using Tapatalk
 
On k20pro 12.5.5.0 for now I don't have any issues end don't find any bug's! In first boot after install it stuck on miui boot logo over 10 minutes but I wait enough and finally its start! After that I do a second restart and the phone start absolutely normal! Thank you guys
19e7cf104ecac12a72f5ae03baacfd2d.jpg


Изпратено от моят Redmi K20 Pro с помощта на Tapatalk
 
mangobento said:
Updated my Poco X3 NFC last night, 12.0.8 > 12.5.

Very nice update, it was lagging a bit at first but after a couple of reboots it's now running very smooth. Need to use system launcher if you want full screen gestures, but it's actually a decent launcher with good customization, I don't mind using this as opposed to Nova.

Much better than the first A11 update for this phone, fantastic work to the team!
Click to expand...

Nice update for me as well but this bit puzzles me. Why no full screen gestures with alternative launcher? Im really digging Niagara and it is a pain having to chose Niagara or gestures. Do you know why this happens or any workaround?.

Thanks in advance
 
blueswift said:
Nice update for me as well but this bit puzzles me. Why no full screen gestures with alternative launcher? Im really digging Niagara and it is a pain having to chose Niagara or gestures. Do you know why this happens or any workaround?.

Thanks in advance
Click to expand...
As far as I know, it is due to the tight integration of gestures in the MIUI Launcher in A11 (maybe for the control center) . But it is not like Xiaomi has gone in great length explaining the details and the impact of the changes...

There are a few workarounds explained in the forum. Look for "gestures" in search, I remember the name of an app called Fluid gestures among the solutions.
 
  • Like
Reactions: blueswift
JiaiJ said:
As far as I know, it is due to the tight integration of gestures in the MIUI Launcher in A11 (maybe for the control center) . But it is not like Xiaomi has gone in great length explaining the details and the impact of the changes...

There are a few workarounds explained in the forum. Look for "gestures" in search, I remember the name of an app called Fluid gestures among the solutions.
Click to expand...
I will have a look, thank you!
 
Guys i'm considering the last stable rom for mi9t pro, is better compared to the old stable rom?
 
Hello.

Changed from Weekly to Stable on Mi11 with 12.5.9 and noticed some problems:

- Android Auto change theme from dark to clear
- Android Auto changes sound/music to phone after a call and have to close all apps including android auto to return the sound to car (radio)
- Buttons from bottom page disappears sometimes

Thanks and regards.
 
Just noticed a couple of things for Poco X3 NFC users I thought I'd share (might work for other users experiencing lag):

Control Centre: Using the new style on 12.5 seems to be pretty laggy for some reason, switching back to the old one makes it much smoother.

Using full screen gestures: enable "hide full screen indicator" and the recents screen loads up much smoother too.

EDIT: Honestly the phone feels a lot smoother now in general? Wonder if there's some weird memory leak for having the full screen indicator there.
 
Last edited:
My K20Pro EU12.5.5.0 version GPAY can add cards and the device is certified for security, but the GPAY software interface will show that it has not been set up. Could adjust what she can use normally? Thanks.
 
Last edited:
Status
Not open for further replies.

Similar threads

ingbrzy
  • Sticky
HyperOS 3.0 HyperOS 3.0 STABLE RELEASE
Replies
2K
Views
900K
HyperOS
MC-7C
M
L
Invalid proxy auto-config not working
Replies
4
Views
1K
Bugs
lukanz
L
ingbrzy
  • Sticky
HyperOS 2.0 HyperOS 2.0 STABLE RELEASE
Replies
4K
Views
3M
HyperOS
yzkzero
Y
S
New Screen artifacts 17U by Leica Nezha
Replies
4
Views
1K
Bugs
PawelJ
P
ingbrzy
  • Locked
HyperOS 1.0 24.7.28 (Final)
Replies
292
Views
1M
HyperOS
Igor Eisberg
Igor Eisberg
Top Bottom
Back