MIUI 12.3 20.12.9/10


Do you like this MIUI version?


  • Total voters
    336
Status
Not open for further replies.
I formatted data partition from f2fs to ext4, I tried to install again and now say to me, this package is for umi device, your device is a cmi, impossibile, my device is mi 10, not mi 10 pro.


this twrp link is for mi 10, not mi 10 pro


if you are using an official twrp, i believe that you will not be able to put this new twrp, i believe that you will have to install a stock rom and delete and only then will you be able to delete this twrp, then you install the new twrp. I don't think it will work to subscribe the twrp you are using for this new one that I posted the link to. If I were you, I would do everything from scratch, installing a stock rom, leaving the device as it came from the factory and then do the procedures using the new twrp and then install the rom xiaomi.eu a lot of work, but safe.
 
this twrp link is for mi 10, not mi 10 pro


if you are using an official twrp, i believe that you will not be able to put this new twrp, i believe that you will have to install a stock rom and delete and only then will you be able to delete this twrp, then you install the new twrp. I don't think it will work to subscribe the twrp you are using for this new one that I posted the link to. If I were you, I would do everything from scratch, installing a stock rom, leaving the device as it came from the factory and then do the procedures using the new twrp and then install the rom xiaomi.eu a lot of work, but safe.
You didn’t understand.
I changed from f2fs to ext4 and now this ******* twrp see my device like mi 10 pro.
Now I flashed your twrp and I’m in fast boot loop.
good job , my device is bricked,
 
You didn’t understand.
I changed from f2fs to ext4 and now this ******* twrp see my device like mi 10 pro.
Now I flashed your twrp and I’m in fast boot loop.
good job , my device is bricked,

and why didn't you do as i said in my previous post? You should have done as I said in my post, doing everything from zero. If you had installed a stock rom, your twrp would be deleted, then you would install the new twrp and everything would be perfect. It was your mistake and not mine.
 
  • Like
Reactions: sxHeavy
and why didn't you do as i said in my previous post? You should have done as I said in my post, doing everything from zero. If you had installed a stock rom, your twrp would be deleted, then you would install the new twrp and everything would be perfect. It was your mistake and not mine.
I had your twrp before, is xiaomi.eu team changed my twrp without permission with 20.11. something.
 
You didn’t understand.
I changed from f2fs to ext4 and now this ******* twrp see my device like mi 10 pro.
Now I flashed your twrp and I’m in fast boot loop.
good job , my device is bricked,
Try now this ...
Enter fastboot mode for the beggining , hold vol- and power on continuously until reenter fastboot mode ..
Connect phone , open cmd at adb folder and write ...
fastboot devices ( device recognition )
fastboot boot twrp1206.img ( or the name you already have )..
Wait almost a minute until twrp will load , flash the rom ..
 
  • Like
Reactions: dattohead
The rom is very good, the only problem is that my MI 9T does not show any wallpaper, only the black screen (the positive part is that it saves battery haha) but I don't know how to solve it
 
I had your twrp before, is xiaomi.eu team changed my twrp without permission with 20.11. something.

Is your device show this screen (systemk destroyed) or can you enter fastboot mode?

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.


If your system has the system screen destroyed, follow this video that you will be able to recover your system, if you can enter fastboot mode, follow what the friend said in the previous post.
 
After the new update:

1. My wifi calling option is missing

2. The option to enable volte is there, but i cannot turn it on

3. I try dial VoLTE *#*#86583#*#* & VoWIFI*#*#869434#*#* on the phone, but nothing happen

I'm using poco f2 pro and my carrier support volte and wifi calling
 

Attachments

  • IMG_20201211_074454.jpg
    IMG_20201211_074454.jpg
    152.7 KB · Views: 414
Last edited:
Where is google discover in settings i cant find it. Also when i select app vault and swipe from left nothing happens, and another bug for me when turn chat bubbles on messenger my chat goes very dark any solution?
 
I flashed this weekly rom on my mi note 10 and i still have problem with the charge percentage at the bottom of the lock screen as it can barely be seen.looks kind of faded.everything else seems good so far.
 
Is your device show this screen (systemk destroyed) or can you enter fastboot mode?

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.


If your system has the system screen destroyed, follow this video that you will be able to recover your system, if you can enter fastboot mode, follow what the friend said in the previous post.

I installed again TWRP 3.4.0, the partition is again f2fs and my phone is again a Mi 10.
I wipe cache, dalvik and i formated data.
I connected via usb the phone to my pc, i see a folder with name TWRP, i copied the ROM 20.12.10 to this folder, from TWRP on my phone i can access to this folder, i installed the rom, i did REBOOT, and now my phone is in TWRP loop, i tried many times, nothing, my phone continue to open the TWRP.
THERE AREN'T ERRORS IN INSTALLATION.
WTF.
 
I installed again TWRP 3.4.0, the partition is again f2fs and my phone is again a Mi 10.
I wipe cache, dalvik and i formated data.
I connected via usb the phone to my pc, i see a folder with name TWRP, i copied the ROM 20.12.10 to this folder, from TWRP on my phone i can access to this folder, i installed the rom, i did REBOOT, and now my phone is in TWRP loop, i tried many times, nothing, my phone continue to open the TWRP.
THERE AREN'T ERRORS IN INSTALLATION.
WTF.

 img]


try to do a completely clean installation, check ALL boxes, dalvik cache, system, data, internal storage, cache, DELETE EVERYTHING. but to do that you need a usb OTG, put the ZIP ZIP rom the same way you download it, don't unzip the rom, put the rom on the USB stick after deleting everything.
I'll summarize to be CLEAR.
1- wipe write yes
2- wipe, advance wipe, mark all boxes and delete.
3- connect your pendrive + otg with the rom.
4- install, select the rom that is on your pendrive and install.
This is the correct way and it guarantees the best possible system functioning.

An OTG costs 2 dollars, you need to have this.
 
Last edited:
After the new update:

1. My wifi calling option is missing

2. The option to enable volte is there, but i cannot turn it on

3. I try dial VoLTE *#*#86583#*#* & VoWIFI*#*#869434#*#* on the phone, but nothing happen

I'm using poco f2 pro and my carrier support volte and wifi calling
Mi 10 Ultra also has the same issue. But I guess it is due to Xiaomi rather than the mod.

通过我的 Mi 10 Ultra 上的 Tapatalk发言
 
  • Like
Reactions: MatDin
After the new update:

1. My wifi calling option is missing

2. The option to enable volte is there, but i cannot turn it on

3. I try dial VoLTE *#*#86583#*#* & VoWIFI*#*#869434#*#* on the phone, but nothing happen

I'm using poco f2 pro and my carrier support volte and wifi calling
Me too
 
The rom is very good, the only problem is that my MI 9T does not show any wallpaper, only the black screen (the positive part is that it saves battery haha) but I don't know how to solve it
Reflash it.
I have wallpaper on my phone.
Just this rom stayed installing, in TWRP, several times in loop before giving back the hand for booting up. strange
 
Status
Not open for further replies.

Similar threads

  • Locked
HyperOS 1.0 24.3.4
Replies
150
Views
42K
  • Locked
HyperOS 1.0 24.2.26
Replies
161
Views
49K
  • Locked
HyperOS 1.0 24.1.29
Replies
227
Views
120K
Replies
259
Views
66K