HyperOS 2.0 HyperOS 2.0 STABLE RELEASE

[Hakans]

I am using Xiaomi 13 Ultra.
The phone screen does not turn on when the alarm rings. The screen is off. You have to press the power button for a long time and then turn the phone back on.

 

[darki]

Is there any way to put the old control center? This one that looks like IOS is a huge problem for me being left handed....
I don't have the option to change it like in hyperOS 1.

Already answered. It's gone.

 

[TheSky]

hello guys, sorry for my ignorance, I was on vacation and I couldn't follow the group. I have a Xiaomi 13 fuxi that has the stable version 1.0.13.0 of hyper os1 and I would like to update to version 2. Do I have to do a data reset or is a dirty update enough? thanks and sorry again

I durty flashed my 1.0 Fuxi to 2.0 and it worked perfectly.

 

[LordGlace]

Already answered. It's gone.

Sorry, my fault for not reading everything.
f**k, I'll have to get used to my mobile not being easy for me.... I hate that they don't think of left handed people when developing things.

 

[PervizMikail]

Is there any way to put the old control center? This one that looks like IOS is a huge problem for me being left handed....
I don't have the option to change it like in hyperOS 1.

You can change the control center side.
Left side - control center
Right side - notifications

 

[dariusju]

Hi,

I've installed version 2.0.9 on Huiji about 15 times, and I've noticed there's roughly a 10% chance that Google files get installed by default. Otherwise, they don't install, or at least they aren't visible in the app list.

 

[akrukau]

going to say something totally baseless and crazy but.. i used to get 4h 30m screen on time (on 4g) when i was rooted with magisk on os2.0.3.0 on nuwa

the day before i did a clean install and did not flash magisk this time around, and today i got 6h 20m screen on time (on 1440p!, 4g only)... if you have magisk, try uninstalling it or clean flashing..

not to mention my banking apps just work without fuss thanks to the xiaomi.eu module too..

also my phone battery is quite depleted too, i have 430 cycles, will use it till one thousand then likely upgrade my phone, or change the battery.

I don't use magisk and i am sure that the battery performance got worse after installing 2.0.11.0. Let's see if the next update solves the problem, otherwise I will try a new clean install.

 

[ntlkr]

I'm on Aurora. I was using Hyperceiler and Pengeek. However, Hyperceiler doesnt fully support Android 15 and Pengeek doesnt seem to support at all.
Does any one have any suggestions for alternative modules that work well with HyperOS 2?
There's only a few options I was using: Add seconds to clock in status bar, Remove privacy dot, add battery bar to top of status bar

After all this time, you've probably found a solution yourself...
In case you didn't: For Hyperceiler, the HyperOS 2.0 update was just published today (on GitHub), and there's an official Pengeek beta build that works on HyperOS 2.0 in the telegram group. Works well for me.

 

[davidetrivella]

I durty flashed my 1.0 Fuxi to 2.0 and it worked perfectly.

Without wipe data?

 

[Igor Eisberg]

Is there any way to put the old control center? This one that looks like IOS is a huge problem for me being left handed....
I don't have the option to change it like in hyperOS 1.

That's what the "Switch Control center side" toggle is for.

 

[AznBoi]

Did anyone find a solution to the WiFi problem on the X14Pro and HyperOS2? Mine seems to be related to 5GHz band mostly where signal is lost. The 2.4Ghz band seems to work ok except range.

 

[poweruser44]

Only magisk has battery issues? What about kernelSU and Apatch?

havent tried

 

[botcanhga]

difference between windows_format_data_only.bat windows_install_and_format_data.bat windows_install_upgrade.bat commands

 

[xMarvin732]

difference between windows_format_data_only.bat windows_install_and_format_data.bat windows_install_upgrade.bat commands

the names literally explain what it means....

windows_format_data_only.bat formats data partition only (factory reset)

windows_install_and_format_data.bat for first install or clean install

windows_install_upgrade.bat for updating (when you are already on Xiaomi.EU ROM)

 

[AlfaX]

Hello,
I have a question, is it normal that I can't find the HyperAI feature on nuwa (Xiaomi 13 Pro)? I can only find The accessibility setting for HyperAI engine but nothing else. To my knowledge it should be available for nuwa and fuxi, at least on China rom (and xiaomi.eu is based on China rom). I hope this is just a bug, idk.

 

[NOSS8]

Hello,
I have a question, is it normal that I can't find the HyperAI feature on nuwa (Xiaomi 13 Pro)? I can only find The accessibility setting for HyperAI engine but nothing else. To my knowledge it should be available for nuwa and fuxi, at least on China rom (and xiaomi.eu is based on China rom). I hope this is just a bug, idk.

HyperOS 2.0 - HyperOS 2.0 STABLE RELEASE

Hi, i am now using hyperos 2.0.4.0 VNCMXIM on xiaomi 14 but all the AI features not supported yet, can i ask if this custom rom which based on 2.0.7.0 support all the AI mention in the changelog and if stable enough to use daily? Thank you The vast majority of AI features, like HyperAI, are...

xiaomi.eu

 

[AlfaX]

HyperOS 2.0 - HyperOS 2.0 STABLE RELEASE

Hi, i am now using hyperos 2.0.4.0 VNCMXIM on xiaomi 14 but all the AI features not supported yet, can i ask if this custom rom which based on 2.0.7.0 support all the AI mention in the changelog and if stable enough to use daily? Thank you The vast majority of AI features, like HyperAI, are...

xiaomi.eu

Oh, so ig it was removed intentionally... Hope they make it work in EU soon.

 

[Igor Eisberg]

the names literally explain what it means....

I guess reading the instructions on the first post is too high IQ for some people.

 

[Rober D. Nuño]

Hello,
In the following image I show you the behavior of my MONDRIAN in the WIFI connection.
Each yellow mark is the time that the device is connected, so we can observe the constant interruptions.

This did not happen with HYPEROS 1.

Does anyone know what configuration I can check to solve this problem?

Thank you!

 

[iden39193]

havent tried

Ok let us know when you try apatch and kernelsu

 

[iden39193]

Why is mi connect constantly working in the background?

 

[Pawluk]

Problem on OS 2.0.8.0 in topaz. When opening application the icon of this application showing on fullscreen for 1 second and it's kinda annoying, any way to fix this?

 

[hoangnam1702]

Does anyone using Xiaomi 13 Pro find the battery draining quite quickly after upgrading to HyperOs 2? Is there any way to fix it?

 

[Peperz]

Hi,how to disable Al-subtitles? I was careless enough to activate it in the settings, realizing that I don't need it, I disabled it, after that when I end an incoming call, a screen with subtitle settings pops up, but all the sliders are disabled. Xiaomi 14 . Xiaomi eu 2.0.9.0 firmware

 

[ToneLa]

difference between windows_format_data_only.bat windows_install_and_format_data.bat windows_install_upgrade.bat commands

What a mystery!