MIUI 11.2 20.3.26 (Final)


Do you like this MIUI version?

  • Total voters
    558
Status
Not open for further replies.
invisiblewave said:
It's likely not the rom, but Google having changed the way the SafetyNet check is done. Have you tried turning off oem unlocking and Magisk hide?
Click to expand...
Not within the five minutes that it took me to upgrade the ROM. The ROM is the only variable here.
 
Yemble said:
Not within the five minutes that it took me to upgrade the ROM. The ROM is the only variable here.
Click to expand...
Did you enable "Magisk Hide" feature in Magisk 20.4? It is now disabled by default.
And did you install any Magisk Module?
 
Last edited:
For those asking about SafetyNet... Google is again up to something....

My Samsung, yesterday cts and basicintegrity both false, today without touching anything both true.
8b53878db691f63a3cc314834015f995.jpg


Poslano z mojega MI 9 z uporabo Tapatalk
 
Poney70 said:
Use Magisk 20.3, or enable "Magisk Hide" feature in Magisk 20.4 if you didn't do that.
And did you install any Magisk Module?
Click to expand...
Yes. I know how to configure Magisk thanks! I am only interested to know if anyone else using the same phone with this same ROM was seeing the same SafetyNet issue.

If you do not own a RN7P, then please do not respond.
 
I think that safety NET is gonne for those with unlocked bootloader

Enviado do meu MI CC 9 através do Tapatalk
 
Hi guys I just found a very strange problem on my MI 9T (Redmi K20).
I'm on the latest dev xiaomi.eu build.

I just discovered the following.
The wide camera (48mp) does not work.
Actually if I block it with my finger, and change between ultra wide, wide or tele I can still see through camera.
It is like the 48mp camera never used...
for ultra wide, it uses the bottom camera and for 1x & 2x it uses the middle camera.
The upper camera (48mp) is never used... Pictures though are super... is this normal?
The above is if I use the default camera app.

If I use a gca m then
ultra wide is again the bottom camera
1x is the middle camera and 2x is the (48mp) wtf?

Thank you in advance!
 
gulp79 said:
Hi guys I just found a very strange problem on my MI 9T (Redmi K20).
I'm on the latest dev xiaomi.eu build.

I just discovered the following.
The wide camera (48mp) does not work.
Actually if I block it with my finger, and change between ultra wide, wide or tele I can still see through camera.
It is like the 48mp camera never used...
for ultra wide, it uses the bottom camera and for 1x & 2x it uses the middle camera.
The upper camera (48mp) is never used... Pictures though are super... is this normal?
The above is if I use the default camera app.

If I use a gca m then
ultra wide is again the bottom camera
1x is the middle camera and 2x is the (48mp) wtf?

Thank you in advance!
Click to expand...
Yes, looks like it's normal...
In MIUI Camera app:
"top" camera is used in "Portrait" mode (= practically same as 2x with "middle" camera).
"middle" camera is used for 48mp / 1x and 2x
"bottom" camera is used for ultra-wide / 0.6x
 
Last edited:
  • Like
Reactions: timbook2 and gulp79
Mysteryagr said:
MIUI 11 beta for xiaomi redmi note 5
I noticed when I add my Google and Mi account while setting up the device, edit button in Quick settings tiles disappears ( look at the attached screen shot )

I have done factory reset many time and full wipe.

I downgraded to the previous week build, and the problem still exists too.

Any idea how to fix it?
Click to expand...
Anybody know a fix for this?
 
Compared to MIUI is VoWifi working on the Mi Mix 3 with this ROM?

I got a sim card with working VoWifi on a Redmi Note 8 but not working with Mi Mix 3 though the options are there.
 
Well, I do not know if I am the only one that happens, but when I write in italics, in the end it is seen that the digit does not end, but that it is cut.
My language is Spanish and the Mi 9t Pro device
 
Can someone know why after I reboot the device
The device won’t boot anymore and continue send me back to fast boot mode but twrp works

Device: mi 8 explorer edition
Root: only magisk
 
xinfu5239 said:
Can someone know why after I reboot the device
The device won’t boot anymore and continue send me back to fast boot mode but twrp works

Device: mi 8 explorer edition
Root: only magisk
Click to expand...
Can be Magisk modules left over or you flash from stock rom....
 
  • Haha
Reactions: cheetahlm
LOLO9393 said:
Can be Magisk modules left over or you flash from stock rom....
Click to expand...

Yes i think is magisk problem,but after I dirty flash
the 20.3.26 rom ,the device work again ! And I flash magisk again,the system still can boot ,weird.....
But thanks!
 
Arcziiiii said:
Hi. Why not for Redmi Note 5A Prime (ugg)? Official MIUI 11 is available.
Click to expand...
RULES WHEN POSTING
1. If a ROM is not published DONT ASK ABOUT ITS ETA
2. If a ROM is not published DONT ASK why!
3. If a ROM is available, download it and use it
4. If a ROM has bugs, post the bug to the bug section if the BUG is not already listed
5. If you use any form of abusive or derogatory language to admins or other users you will be BANNED forever!
6. If you quote whole first or second post, your post will be deleted and ignored
7. We do not own all supported devices, so in case of issue, post log to be able fix it
8. Only posts in English language are accepted

That's why.
 
hey i have a question if on version 20.3.27 batteries have been improved compared to 20.3.19 on mi 9t pro?

Wysłane z mojego Mi 9T Pro przy użyciu Tapatalka
 
Status
Not open for further replies.

Similar threads

ingbrzy
  • Locked
HyperOS 1.0 24.7.28 (Final)
Replies
292
Views
237K
HyperOS
Igor Eisberg
Igor Eisberg
ingbrzy
  • Locked
HyperOS 1.0 24.7.22/25/26
Replies
51
Views
35K
HyperOS
Ahaba
A
ingbrzy
  • Locked
HyperOS 1.0 24.7.1
Replies
54
Views
40K
HyperOS
Mistery88
M
ingbrzy
  • Locked
HyperOS 1.0 24.7.15/17
Replies
87
Views
37K
HyperOS
KGVER
KGVER
ingbrzy
  • Locked
HyperOS 1.0 24.7.8/12
Replies
50
Views
32K
HyperOS
emre_66
E
Top Bottom
Back