[GUIDE][POCO F2 Pro] How to pass SafetyNet on Android 11 and Magisk

[xand3r40r93]

1. Install the latest weekly or global firmware in twrp. (without magisk)
2. reboot.
3. complete the first setup.
4. reboot to recovery.
5. install latest magisk canary (now the latest stable version is v20.4, but need higher)
6. reboot.
7. enable magiskhide and hide magisk manager.
8. install magiskhide props config.
9. reboot.
10. run in termux or any terminal

su
props

11. enable force BASIC key attestation (press 2), for "Redmi K30 Pro"
12. reboot.

 

[xand3r40r93]

 

[jjoeshua]

what about fingerprint? I lost my fingerprint sensor and now I can not restore it by flashing fastboot rom or recovery? how to fix that ?

 

[xand3r40r93]

what about fingerprint? I lost my fingerprint sensor and now I can not restore it by flashing fastboot rom or recovery? how to fix that ?

I don't know

 

[Poney70]

what about fingerprint? I lost my fingerprint sensor and now I can not restore it by flashing fastboot rom or recovery? how to fix that ?

Your question has nothing to do with this guide, right? ...

To people with "persist" partition issue, try this => How to restore "persist" from "persistbak" partition

 

[lebannen74]

hello,

is there a way to correct this without rooting the phone ?

 

[jjoeshua]

works for me too!

 

[lary504]

Safety net ok but Google Pay don't work

Wysłane z mojego POCO F2 Pro przy użyciu Tapatalka

 

[94burns]

1. Install the latest weekly or global firmware in twrp. (without magisk)
2. reboot.
3. complete the first setup.
4. reboot to recovery.
5. install latest magisk canary (now the latest stable version is v20.4, but need higher)
6. reboot.
7. enable magiskhide and hide magisk manager.
8. install magiskhide props config.
9. reboot.
10. run in termux or any terminal

su
props

11. enable force BASIC key attestation (press 2), for "Redmi K30 Pro"
12. reboot.

My device is not certified, any idea?

 

[Poney70]

My device is not certified, any idea?

Did you check if your device pass SafetyNet? If your device passes, you simply have to clear "All app data" of "Google Play store", "Google Play services" and "Google Service Framework". Then, reboot your device.

 

[geoorg]

hello,

is there a way to correct this without rooting the phone ?

Yes, just flash stock ROM

EDIT: that was sarcasm incase you missed it

But if you could find a TWRP only solution, we'll be glad if you share with us

 

[94burns]

Did you check if your device pass SafetyNet? If your device passes, you simply have to clear "All app data" of "Google Play store", "Google Play services" and "Google Service Framework". Then, reboot your device.

It fails safety net.

 

[Poney70]

It fails safety net.

You have 2 workarounds here => https://xiaomi.eu/community/threads...-failed-redmi-k30-pro-zoom.57923/#post-567224

 

[94burns]

You have 2 workarounds here => https://xiaomi.eu/community/threads...-failed-redmi-k30-pro-zoom.57923/#post-567224

thank you for the reply.

I tried option two and it still fails for me.

 

[Poney70]

thank you for the reply.

I tried option two and it still fails for me.

Can you share the screenshot of the SafetyNet results from Magisk Manager app?

 

[94burns]

Can you share the screenshot of the SafetyNet results from Magisk Manager app?

 

[Poney70]

@94burns Oh, so if you see "BASIC" = Good news!

Can you write your device model and ROM version?

 

[94burns]

@94burns Oh, so if you see "BASIC" = Good news!

Can you write your device model and ROM version?

POCO F2 PRO - 20.10.30

 

[Poney70]

POCO F2 PRO - 20.10.30

Can you take a screenshot of the 'Operating System' infos (in "System" menu) from "DevCheck" app? Thanks.

 

[94burns]

Can you take a screenshot of the 'Operating System' infos (in "System" menu) from "DevCheck" app? Thanks.

 

[Poney70]

@94burns Follow these steps to fix SafetyNet on your device:

1. Start Termux and type "su" and hit enter , after this termux ask Magisk-Manager to prompt for root access => Grant it
2. Type "props" command and hit enter
3. After MagiskHide-Props loaded successfully, type "1" to edit device fingerprint
4. Type "f" to pick a certified fingerprint
5. Type "25" to chose "Redmi"
6. Type "2" to chose "Redmi K30 Pro Zoom Edition (10)"
7. Type "y" to confirm it
8. Type "y" to reboot your device

Check SafetyNet in Magisk Manager app and it should be all good now. Do not forget to clear app data => https://xiaomi.eu/community/threads...et-on-android-11-and-magisk.57627/post-569986

 

[hofi01]

hy
ihave do it with
22-POCO; 2- POCO F2 Pro Global(10)
works great with magisk 21

 

[94burns]

@94burns Follow these steps to fix SafetyNet on your device:

1. Start Termux and type "su" and hit enter , after this termux ask Magisk-Manager to prompt for root access => Grant it
2. Type "props" command and hit enter
3. After MagiskHide-Props loaded successfully, type "1" to edit device fingerprint
4. Type "f" to pick a certified fingerprint
5. Type "25" to chose "Redmi"
6. Type "2" to chose "Redmi K30 Pro Zoom Edition (10)"
7. Type "y" to confirm it
8. Type "y" to reboot your device

Check SafetyNet in Magisk Manager app and it should be all good now. Do not forget to clear app data => https://xiaomi.eu/community/threads...et-on-android-11-and-magisk.57627/post-569986

Wow thank you so much, just tried this and it works.

 

[StanislavT]

I have Xiaomi Mi 10 with xiaomi 12.1.5 stable and set Mi 10 Global for 11 but not work. What should I do now?

Ok I choose option 2 and set Mi 3 (default) and CTS Profile is True

 

[jason88fr]

I followed the above instructions and had success as well.

1. Flashed "xiaomi.eu_multi_HMK30Pro_V12.1.3.0.RJKCNXM_v12-11.zip" with "recovery-TWRP-3.4.2B-0623-REDMI_K30PRO-CN-wzsx150.img"
2. Reboot.
3. Complete the first setup, add wifi and activate, do the bear minimum setup to go faster, you can setup your apps later.
4. Reboot to recovery.
5. Install Magisk Canary
6. Reboot.
7. Repackage Magisk Manager, re-launch the manager, don't create the shortcut, enable magiskhide.
8. Install Magiskhide Props module from the repo.
9. Reboot.
10. Run the folliwing commands in Termux (Android Terminal)

su
props

11. Enable force BASIC key attestation (Option 2), for "Redmi K30 Pro", proceed with yes, yes so you can reboot.
12. Reboot, check CTS.