[HowTo] Install Recovery image


Thanks a lot !
Now, I can boot to orangefox.
And I can flash orangefox.zip, but after, I need to reboot to recovery to flash xiaomi rom and I have black screen, it doesn't boot in recovery.

And I have ERROR 1 when I flash xiaomi.eu rom...

And "E: Unable to unmap dynamic partitions." if I want to format data... :(
hello... which device / which twrp or of version / are you on A11 or A12 ?
 
Hi.
Lisa for smartphone. I was on orangefox with latest A12 xiaomi.eu rom. But now, everything seems wiped/formated... And even fastboot flash don't work, with error.

I'll try to flash Stock rom.
 
hello... which device / which twrp or of version / are you on A11 or A12 ?
Good news, I could restore everything. But I had to flash stock rom, and I made a mistake flashing bad region stock rom...
But all is good now, with latest weekly xiaomi.eu build !

Thanks all for help
 
  • Like
Reactions: katerpanne
there was no alternative I had to patiently back up and format clean to be able to install everything fine so far without problems
 
  • Like
Reactions: katerpanne
I followed the instructions but when I flash TWRP with fastboot boot twrp.img nothing happens on the phone. Still on fastboot screen. Any help?

Xiaomi 12 Pro
 
I see an error. Probably because I tried installing the A12 version. Tried the A13, got an OK from adb, phone screen became black, then nothing. Still need help...
 
I see an error. Probably because I tried installing the A12 version. Tried the A13, got an OK from adb, phone screen became black, then nothing. Still need help...
please describe in detail what you did, which versions did you use, error messages….
 
Hi, when do I need to format data? Flash rom first and then format, or format and then flash rom? thank you in advance
 
Please some help.

Tried to install xiaomi.eu ROM from Global, and I did steps on first page to flash ROM. After flash ROM, I flashed the TWRP (twrp-3.6.2_12-v6.0_A12-alioth-skkk.img) and after that, when I reboot phone It reboots to fastboot. When I boot the twrp from adb, It shows 0mb on storage.
I try to flash global rom to check if solves, but flash didn't work.
 
Please some help.

Tried to install xiaomi.eu ROM from Global, and I did steps on first page to flash ROM. After flash ROM, I flashed the TWRP (twrp-3.6.2_12-v6.0_A12-alioth-skkk.img) and after that, when I reboot phone It reboots to fastboot. When I boot the twrp from adb, It shows 0mb on storage.
I try to flash global rom to check if solves, but flash didn't work.
UPDATE: I solved the 0mb problem following a tutorial found here. Gonna leave here it for someone who may face this problem too.

The only way I could flash the rom with recovery was installing previous version through fastboot and after boot trwp and flash rom.
 
Last edited:
UPDATE: I solved the 0mb problem following a tutorial found here. Gonna leave here it for someone who may face this problem too.

The only way I could flash the rom with recovery was installing previous version through fastboot and after boot trwp and flash rom.
what was the solution for you in the mentioned tutorial ?
the pin?
 
hi, i currently have rom:Nusantara aosp. Twrp Skkk is installed. Do i need to flash stock rom first? Or can I flash xiaomi.eu immediately? thanks in advance
 
hi, i currently have rom:Nusantara aosp. Twrp Skkk is installed. Do i need to flash stock rom first? Or can I flash xiaomi.eu immediately? thanks in advance
normaly you should be able to install xiaomi.eu rom directly with format data. you can flash stock rom first. try it…
 
  • Like
Reactions: pistap
Thanks. Followed the first post for my 11T Pro and it went well. unlock/flash recovery/format data/flash rom.
I had to reboot recovery 3-4 times to be able to flash the rom, weirdly, as mentioned in the OP (error 1 thing).
 
  • Like
Reactions: katerpanne
Thanks! I followed the guide and it worked.
Only difference was my TWRP boot was in Chinese for some reason.
Thankfully the picture guide showed me what to tap based on location lol.
 
  • Like
Reactions: katerpanne
Hi, Im about to update. I have an 12s ultra that is A/B.
According to pictures I shall choose "system" and not "A" or "B" but the phone says that I shall choose "A" after installation.

Skall I follow this instruction in the thread or the instruction the phone gives me?
 
Hi, Im about to update. I have an 12s ultra that is A/B.
According to pictures I shall choose "system" and not "A" or "B" but the phone says that I shall choose "A" after installation.

Skall I follow this instruction in the thread or the instruction the phone gives me?
During install I got error messages in red text, does that affect what I shall do now? See picture.
 

Attachments

  • IMG_20220922_091717_1663831182144.jpg
    IMG_20220922_091717_1663831182144.jpg
    219.1 KB · Views: 156