(Mi 8 SE) HOW TO INSTALL XIOAMI.EU 9.1.3


Flash 1217 TWRP with adb on PC

Reboot to recovery and format data

Flash latest eu.rom and back- NO REBOOT

Load phone to PC with adb than flash 1227

Reboot to recovery, than reboot to system

DONE :)
 
Hello people, is this new TWRP for Mi8SE? Mi8SE uses Sirius board name?
https://androidfilehost.com/?fid=11410963190603903348

I dont see the number but the update date is Jan 18, 2019 | 02:18PM.

NOPE!
This "TWRP_sirius_9.zip" is for MIUI 9 up to rom 8.12.20. I tested it on rom 9.1.3 and it doesn't boot.
With it you can flash latest rom 9.1.10 BUT you MUST install 1227 version BEFORE rebooting in the rom system.
Link to chinese latest TWRP. Take 1227 release to make it stay after reboot.
https://drive.google.com/drive/folders/1IeCtb6vRO4CRe76s0BD_5TQiSnymPBTT
 
Hi,
i have my MI 8 SE unlocked.

On the Phone is the newest China Stable. I flashed the newest TWRP with fastboot. But when i reboot the phone with

fastboot boot twrp.img

the command line says rebooting ok, but the screen of the phone is still black.

When i reboot the phone with Power and Volume up the phone stays at the MI Logo.

When i reboot to system and then power off and start the phone with power and volume up the phone boots into the original recovery.

Can you help me?
 
Hi,
i have my MI 8 SE unlocked.

On the Phone is the newest China Stable. I flashed the newest TWRP with fastboot. But when i reboot the phone with

fastboot boot twrp.img

the command line says rebooting ok, but the screen of the phone is still black.

When i reboot the phone with Power and Volume up the phone stays at the MI Logo.

When i reboot to system and then power off and start the phone with power and volume up the phone boots into the original recovery.

Can you help me?
this because you are not booting the right twrp.
China stable is to comply with 1102 twrp or may be 1217. Try boot them without flashing them (same instruction!)
Twrp Change is to be applied after 8.12.20 rom.
 
this because you are not booting the right twrp.
China stable is to comply with 1102 twrp or may be 1217. Try boot them without flashing them (same instruction!)
Twrp Change is to be applied after 8.12.20 rom.

TWRP 1102 works. But when i manuelly reboot the original Recovery is booted.

How is the next step?

Install TWRP 1102 and then the new xiaomi.eu ROM and update TWRP or install TWRP 1102 and update it and then installing the new xiaomi.eu ROM?
 
TWRP 1102 works. But when i manuelly reboot the original Recovery is booted.

How is the next step?

Install TWRP 1102 and then the new xiaomi.eu ROM and update TWRP or install TWRP 1102 and update it and then installing the new xiaomi.eu ROM?
steps are to install eu rom latest with 1102 or 1217. don't boot the rom in system!!!!!
return recovery and flash 1227 twrp. reboot rom system.
that's all until next modification.....
 
steps are to install eu rom latest with 1102 or 1217. don't boot the rom in system!!!!!
return recovery and flash 1227 twrp. reboot rom system.
that's all until next modification.....
Done. But Bootloop. Phone stays at MI Logo.
 
Done. But Bootloop. Phone stays at MI Logo.
Something messed up in your manipulation.
My suggestion is to start from fresh basis with a fastboot( tgz )official rom via MIflash and the twrp 1102 and the new 9.1.17 eu as done before.
 
Something messed up in your manipulation.
My suggestion is to start from fresh basis with a fastboot( tgz )official rom via MIflash and the twrp 1102 and the new 9.1.17 eu as done before.

Needs MIflash the packed file or have i unpack the tgz file?
 
Ok. When i have installed TWRP 1102 and flashed xiaomi.eu ROM, should i update TWRP by TWRP or by Fastboot?
simplest: you place TWRP.img file somewhere in your phone memory and when you finish rom flashing you install twrp image in one draw. no need to go in fastboot.
 
Flashing from China Developer to xiaomi.eu phone always boots to Fastboot.

Flashing from China Stable to xiaomi.eu (Developer or Stable) phone boots and stays at Mi Logo.

I spent one day on this phone and nothing works. This is disappointing.
In Future i will buy a phone with Global Rom, then i need no other ROM:
 
  • Like
Reactions: mnikolce
The Problem is the TWRP Version 1227. That works not right. All TWRP Version can be bootet after the installation.
But the 1227 not.

I am on 8.12.27 xiaomi.eu with 1217 TWRP. That works.
 
How about formatting data prior flashing the Rom? (Not just factory reset) ?

Sent from my MI 8 Explorer Edition using Tapatalk
 
How about formatting data prior flashing the Rom? (Not just factory reset) ?

Sent from my MI 8 Explorer Edition using Tapatalk
Good idea. Maybe it was important.

Xiaomi.eu 9.1.17 Developer ROM is on my Phone.

My Solution after one day:

Flash with Miflash the latest China Stable

Then install xiaomi.eu Rom with the Tuturial from Tradingshezhen.
Use Google to find it. Search for Xiaomi Mi8 SE Tuturial. The Link to this is here not allowed.

Then install TWRP 1227 via Fastboot and do not boot into the Recovery. That do not work. I think this is a problem from TWRP 1227.

Boot the System.

Go to Updater App and Boot from the Updater App to Recovery. That works.

Then Format Data.

Reboot to Recovery again from TWRP.

Copy the newest xiaomi.eu Developer ROM to the Device.

Install the Rom in TWRP.

Reboot to System.
 
Last edited:
Good idea. Maybe it was important.

Xiaomi.eu 9.1.17 Developer ROM is on my Phone.

My Solution after one day:

Flash with Miflash the latest China Stable

Then install xiaomi.eu Rom with the Tuturial from Tradingshezhen.
Use Google to find it. Search for Xiaomi Mi8 SE Tuturial. The Link to this is here not allowed.

Then install TWRP 1227 via Fastboot and do not boot into the Recovery. That do not work. I think this is a problem from TWRP 1227.

Boot the System.

Go to Updater App and Boot from the Updater App to Recovery. That works.

Then Format Data.

Reboot to Recovery again from TWRP.

Copy the newest xiaomi.eu Developer ROM to the Device.

Install the Rom in TWRP.

Reboot to System.
I wake up
and see you finally succeeded. good
In my opinion 1227 twrp is tricky, I don't know why. But many people found a different installation results without any clear understanding of the matter.
I would like to understand what's the difference between 1217 version (this is well working on my phone) and 1227 '('two versions, one has been modified by 4pda people) .
Salve
 
Last edited: