MIUI 12.0 MIUI 12 STABLE RELEASE

[katerpanne]

@Poney70 you are the best !!!

 

[Nassernody]

Hello everyone and thanks to the team for this rom.
On toco / Note 10 Lite after last update 12.1.1 stable is almost unusable. The update process pass smooth without error or warning. Now on every app, no matter which, system or GP app crash 10 sec after open it, is there a fix for this or how can i downgrade without wiping all info and apps? Thanks!

Unfortunately this update sucks lags and crashes not stable even with formatting data I talk about the update itself the source not xiaomi.eu rom

 

[katerpanne]

Unfortunately this update sucks lags and crashes not stable even with formatting data I talk about the update itself the source not xiaomi.eu rom

I cant understand your issues... on my 3 phones everything is working well. perhaps try a clean install.

 

[Nassernody]

I cant understand your issues... on my 3 phones everything is working well. perhaps try a clean install.

I did clean install two times ang download it again same lags and unstable

 

[Nick1]

Hello!
My phone is Xiaomi Redmi Note 9 Pro Global (joyeuse). I have problems with firmware MIUI v12.0.1.0 (latest stable) ("xiaomi.eu_multi_HMNote9ProEU_V12.0.1.0.QJZMIXM_v12-10.zip"). Every time when I reboot my phone ALL APPLICATIONS don`t start. I need enter graphical key (pin-code, password etc...) before it, that application start after reboot.

How can I do that application starts after reboot my phone AUTOMATICALLY (WITHOUT entering password, pin-code, etc)??? (it starts only after entering graphical key...)

 

[Renek74]

I have a Mi8 with latest Beta Rom. Any possibility to update to Stable? MIUI is version 12.1, Beta is 20.9.4 thanks for an answer...

 

[Poney70]

I have a Mi8 with latest Beta Rom. Any possibility to update to Stable? MIUI is version 12.1, Beta is 20.9.4 thanks for an answer...

It still a downgrade so you must do a clean flash to avoid issues.

 

[Renek74]

It still a downgrade so you must do a clean flash to avoid issues.

So I have to wait for an newer version

 

[ThE-MaRaC]

Can we install HMK30SUltra_MI10T_V12.0.10.0 ROM to MI 10T Pro or will there be a separate release for it? Thx.

 

[f_padia]

Not sure why but have intune (ms company portal) installed on my mix2s and installed also EU stable with company portal on a colleague with mi10 pro. Both devices are managed by the company. Maybe my company policies allows it dunno. Activated both on the web portal with QR code.
Waiting for next 10T Pro (this device) EU stable to install, hope it goes well!

Sent from my M2007J3SG using Tapatalk

I'm still on 12.0.3 EU ROM on mi10 pro and I seem to have been able to install intune too

 

[Poney70]

Can we install HMK30SUltra_MI10T_V12.0.10.0 ROM to MI 10T Pro or will there be a separate release for it? Thx.

I will say yes but you can wait another answer if you want.

 

[Krohme]

Anyone on the Poco F2 Pro on build 12.2.2.0 experience a delay when going into settings?

I've factory reset (came back from a custom ROM)

After opening it for the first time, settings opens instantly but after the device sleeps for a while, it takes like a second or 2 to load, in fact most apps seem to get killed off in memory continually - almost soon as I switch to another app

I've tried enabling auto start, changing battery saver to no restrictions, turning off gaming mode and anything else I could find, but no matter what I do the system seems to be very aggressive at closing apps in the background

On the custom ROMs I've tried this issue is non existent, device can be left asleep for ages and apps still open almost instantly

Is there anything I've overlooked that could improve this?

 

[domon07]

Has anyone updated their mi 10 pro to 12.2.3 yet? Any review?

 

[nCuXaPa]

Has anyone updated their mi 10 pro to 12.2.3 yet? Any review?

I updated it yesterday. At the moment it behaves quite well. Unfortunately dual apps still don't work - cause crashes of system applications like gallery, file manager, etc. SafetyNet passes. Dirty flash on 12.2.2 with TWRP 3.4.2b - 0623. I haven't tried to make a clean flash to see if there will be a difference.

 

[jonathan240196]

When will a stable version update for Redmi K20 Pro / Mi 9T Pro be released? Thank you.

 

[Stelvio79]

one question but mi9 lite is no longer supported i have been getting updates for six months as the beta goes on

 

[domon07]

I updated it yesterday. At the moment it behaves quite well. Unfortunately dual apps still don't work - cause crashes of system applications like gallery, file manager, etc. SafetyNet passes. Dirty flash on 12.2.2 with TWRP 3.4.2b - 0623. I haven't tried to make a clean flash to see if there will be a difference.

I had issues with messenger chat bubbles on 12.2.2. Is it still buggy on 12.2.3? I've nevee dirty flash my rom as I don't wanna go thru the hassle.

 

[ThE-MaRaC]

I will say yes but you can wait another answer if you want.

Thx, but I would appreciate an answer from someone that already tried to install it.
I will probably have to test it by myself.

 

[Nick1]

Anyone on the Poco F2 Pro on build 12.2.2.0 experience a delay when going into settings?

I've factory reset (came back from a custom ROM)

After opening it for the first time, settings opens instantly but after the device sleeps for a while, it takes like a second or 2 to load, in fact most apps seem to get killed off in memory continually - almost soon as I switch to another app

I've tried enabling auto start, changing battery saver to no restrictions, turning off gaming mode and anything else I could find, but no matter what I do the system seems to be very aggressive at closing apps in the background

On the custom ROMs I've tried this issue is non existent, device can be left asleep for ages and apps still open almost instantly

Is there anything I've overlooked that could improve this?

Hello! Have you looked at the battery settings? (May be your memory cleaning every 1 minute???) (Settings-->Battery-->Settings (nut icon in the upper right corner)-->Clearing memory-->NEVER

 

[RootFreak]

nvm
Thank you!!!

 

[Hitardo]

wich TWRP you have used?

On my toco, after upgrading to Xiaomi.eu MIUI v12.1.1, on Android 11, I used a custom TWRP, the version 3.4.0-14, produced by Mauronofrio, from the XDA forum:

[RECOVERY][3.4.0-14][toco]Unofficial TWRP Xiaomi Mi Note 10 Lite (TEST)

Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and...

forum.xda-developers.com

Before, I used the TWPR v3.3.1, also from Mauronofrio.

 

[Hitardo]

Hello, try to remove all dual apps (cloned apps) and "All dual apps accounts" in dual apps settings (phone's settings).

I confirm this.
But, disabling the Cloned apps is not sufficient.

You should go into:
Settings -> Apps -> Cloned apps -> settings icon (on the top right corner) -> Remove cloned apps (the top option).
This will take some time, and then the phone will reboot itself automatically.

I think this is due to the fact that, one some applications, MIUI has to also copy Google Services - in order to attend both instances of the same application.
On Android 11, Google might have changed some things, and it seems that Xiaomi was not able to implement this feature properly on this build (v12.1.1) for the Mi Note 10 Lite (toco).

I tried to reactivate this feature, and the same issue arises again: FC (force closure) on many applications, after some seconds of opening them.

I guess I can live without this feature for a month or two (hopefully not more).

Thank you all!

 

[gkalen]

I've question about Mi note 10 lite, im using mi8 and i had mi6. There were working twrp properly. What is recomended way to flash xiaomi.eu for toco? If new version will be avaliable it will requere more steps than on e.g. mi8 (download from updater and auto flash via recovery as ota)?

Thanks in advance.

Thank you for the Information. There is no stable TWRP for the mi note 10 lite, that is the Problem. I have the same device and i am wory to Update.

On my toco, after upgrading to Xiaomi.eu MIUI v12.1.1, on Android 11, I used a custom TWRP, the version 3.4.0-14, produced by Mauronofrio, from the XDA forum:

[RECOVERY][3.4.0-14][toco]Unofficial TWRP Xiaomi Mi Note 10 Lite (TEST)

Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and...

forum.xda-developers.com

Before, I used the TWPR v3.3.1, also from Mauronofrio.

STABLE TWRP for toco ..
By @geoanto555 .. https://www.mediafire.com/file/hs3kgqq5sv9uq0n/twrp_toco-MN10L_3.5.A10-01-01-2021_bl-l.img/file
By alex .. https://androidfilehost.com/?fid=8889791610682900726

 

[Putti]

I forgot how to give apps permission to clipboard?

 

[perrygi]

Just a little request:
Couldn't the battery bar be reintroduced for those devices that have some free space between the camera hole and the top edge?
I used it for years on Mido and Whyred and would like to do it on Joyeuse too.

Thanks.
P.G.