TWRP Loop after install xiaomi.eu_multi_HMNote9ProEU_V12.0.1.0.QJZMIXM_v12-10


F

Fake email!

hi guys, i'm new to this world but i found yours a fantastic job.

I'm having a problem installing your rom (xiaomi.eu_multi_HMNote9ProEU_V12.0.1.0.QJZMIXM_v12-10).
My smartphone is a Redmi Note 9 Pro with (joyeuse_id_global_images_V12.0.2.0.QJZIDXM) with unlocked bootloader.
After a couple of attempts I manage to install:

twrp 3.4.0-14 by mauronofrio:
- fastboot devices
- fastboot flash recovery twrp 3.4.0-14 by mauronofrio.img
- fastboot boot twrp 3.4.0-14 by mauronofrio.img or fastboot reboot

then I tried these three ways:

1 - Wipe -> Advanced Wipe -> DATA -> Back
- Install -> .zip ROM -> Wipe Cache / Dalvik Cache -> Restart

2 - Wipe -> Format Reset -> Back
- Install -> .zip ROM -> Wipe Cache / Dalvik Cache -> Restart

3 - Install -> .zip ROM -> Wipe Cache / Dalvik Cache -> Restart

Without ever receiving an error, But when I restart it always comes back to the TWRP in loop and in the Insall folder I find only folders with "numbers and letters".

To solve I have to go back to flashing with miFlash.

how can i proceed with the installation of your rom?

Thanks in advance
 
mariorui said:
hi guys, i'm new to this world but i found yours a fantastic job.

I'm having a problem installing your rom (xiaomi.eu_multi_HMNote9ProEU_V12.0.1.0.QJZMIXM_v12-10).
My smartphone is a Redmi Note 9 Pro with (joyeuse_id_global_images_V12.0.2.0.QJZIDXM) with unlocked bootloader.
After a couple of attempts I manage to install:

twrp 3.4.0-14 by mauronofrio:
- fastboot devices
- fastboot flash recovery twrp 3.4.0-14 by mauronofrio.img
- fastboot boot twrp 3.4.0-14 by mauronofrio.img or fastboot reboot

then I tried these three ways:

1 - Wipe -> Advanced Wipe -> DATA -> Back
- Install -> .zip ROM -> Wipe Cache / Dalvik Cache -> Restart

2 - Wipe -> Format Reset -> Back
- Install -> .zip ROM -> Wipe Cache / Dalvik Cache -> Restart

3 - Install -> .zip ROM -> Wipe Cache / Dalvik Cache -> Restart

Without ever receiving an error, But when I restart it always comes back to the TWRP in loop and in the Insall folder I find only folders with "numbers and letters".

To solve I have to go back to flashing with miFlash.

how can i proceed with the installation of your rom?

Thanks in advance
Click to expand...
-it's not wipe to be done!
-You must FORMAT DATA in twrp wipe section. and nothing else!
6524#
 
  • Like
Reactions: katerpanne
so after installing TWRP and copying the rom.zip to the directory of my smartphone I must first: Wipe -> Advanced Wipe -> DATA (right swipe) --> back and then Install the Rom
or should I first Install the Rom and then go to Wipe?

do I have to click on Wipe Cache / Dalvik Cache after installing the rom?
 
32855

(https://xiaomi.eu/community/threads...-2-versions-already.56896/page-12#post-572174)


i had the same problem as you (@Tactical1977)
i tried to follow these steps suggested by (@rbarat):

-In TWRP click on Wipe, then on Format Data -> type "yes" (this will decrypt the phone)
-Now you need to restart the phone to TWRP (in TWRP click on the Reboot button, then click on the Recovery button) !!! (important, otherwise it will not work)
-In TWRP, connect the phone to the PC and copy the ROM to Internal storage
-Install ROM (In TWRP click on Install and select ZIP from storage)
-Restart to System

But when I connect the phone after reboot to copy the rom, my pc detects the phone but with unknown memory and therefore does not make me copy into the rom.

how can I do?
 
32859


the photo refers to the phone just flashed with miflash.

Unknown memory in the sense that I no longer see how many giga are available and also by opening internal storage there are no more folders and I cannot copy any file inside.

i have developer options active, usb debugging, install via usb, usb debugging (security settings) active.

in the pc I have installed adb version 1.3, the 1.4.3 I can't install it
 
As I can see here on your screenshot, your phone is recognized by the PC. So just copy the ROM-zip on it and install it with TWRP.
 
the last screen was done after flashing the original rom with miflash as after Format Data -> type "yes" the phone could not find anything inside the install folder.

can you tell me if the chronological order of the steps to be performed is correct?

1 - install twrp 3.4.0-14 by mauronofrio
2 - click on Wipe, then on Format Data -> type "yes" (this will decrypt the phone)
3 - restart the phone to TWRP
4 - In TWRP, connect the phone to the PC and copy the ROM to Internal storage
5 - Install ROM (In TWRP click on Install and select ZIP from storage)
6 -Restart to System

or should I first copy the rom in the directory and then access twrp do format data and then install the rom?
 
  • Like
Reactions: Poney70
These steps are correct. If you copy ROM to device before format data it will be deleted, so you need to copy it again.
Before "6 -Restart to System" I always perform a wipe cache/dalvik and repeat it, when system has been started and there are lags.
 
tonight I tried again:

installed twrp -> see internal memory

boot in twrp- -> wipe -> format data (bottom) -> back -> back -> reboot button -> recovery


32866


on reboot I have this situation and I can't copy the rom inside the internal memory:

32867


what do you recommend?
is there an alternative?
I've flashed with miflash like 14 times since yesterday -.-'

- can i try with adb sideload method??
 
Last edited by a moderator:
hello @Poney70 , can I always install this recovery with power shell -> adb -> fastboot device -> fastboot flash recovery recovery-TWRP-3.4.1B-0530-REDMI_NOTE9S-CN-wzsx150.img -> fastboot reboot?
 
ok later i try, but is it necessary to do the format Data in wipe?

as if it were brand new, also I don't need to back up now I can delete everything)

after installing the rom do I wipe cache / dalvik?
 
mariorui said:
ok later i try, but is it necessary to do the format Data in wipe?

as if it were brand new, also I don't need to back up now I can delete everything)

after installing the rom do I wipe cache / dalvik?
Click to expand...
Yes "Format Data" in Wipe menu.

You can wipe cache / dalvik, it never hurts. ;)
 
now it reads me the internal memory, but "note 9s" while mine is "note 9 pro" (joyeuse)?
in fact for this name change I get an error "ERROR: 7 ...." as soon as I install.

I have seen that there is a method to correct it, but I wonder if doing so is like retrograde my phone?
32888
 
sorry I didn't understand, I wrote the same thing.
do I have to add the quotes ""?
 
i found this video:
To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

it use this recovery: PitchBlack Recovery Project

and install this: en_de-crypt_v3.zip, what is it?
 
  • Like
Reactions: med3ed
You must log in or register to reply here.

Similar threads

J
How do I install a rom for mi11ultra after wiping internal storage?
Replies
3
Views
295
Questions & Answers
PervizMikail
PervizMikail
M
Stuck on boot loop after installing ROM!
Replies
5
Views
2K
Questions & Answers
medesnabbt
M
P
Format for stable rom higher or lower Android ver RN 10 Pro
Replies
0
Views
657
Questions & Answers
P0888
P
D
install twrp on poco f5 pro with miui eu
Replies
2
Views
4K
Questions & Answers
dorello
D
F
Stuck in boot loop
Replies
2
Views
3K
Questions & Answers
Lauraas
L
Top Bottom
Back