MIUI 12.5 21.2.3/4


Do you like this MIUI version?


  • Total voters
    421
Status
Not open for further replies.
I've got both on so I don't know. I'll try to connect only 2,4 by disabling 5ghz on router. Unfortunately you can't choose which to connect manually with ROM
Can't you rename the SSID for the 5 Ghz Wifi on your router? It's better to have two different SSID for 2,4 and 5 Ghz. :)
 
Apologies...first time posting.
So...I flashed Miui eu 12.5 weekly and 12.0.3 stable on my Redmi Note 7 Lavender, using TWRP. Always doing a clean installation. Tried using previous build weekly as well. Always with the same end results, wifi will not turn on. Flashing stock rom after fixes wifi again.
Weird..., nobody reported that issue on RN7 (lavender).

EDIT: Maybe this patch can help but it's not guaranteed => TWRP_MIUI_Fix_WiFi_v1.0.zip

:)
 
Last edited:
Can't you rename the SSID for the 5 Ghz Wifi on your router? It's better to have two different SSID for 2,4 and 5 Ghz. :)
Routers these days can automatically switch between 2.4GHz and 5GHz with both frequencies sharing the same SSID. If this person is using a newer router with the feature enabled by default, you will need to modify your router settings to disable this feature. I know in my router this feature is referred to as smart connect, however different manufacturers may use different terms.
 
  • Like
Reactions: Poney70
[Very low speed WiFi]
I have the same problem with Mi 10
250mb service but only get around 15mb
While it may be a problem, are you sure you're connecting to a fast network? I sometimes find slow WiFi because the phone (not Mi 10] has connected to my 2.4GHz 802.11n instead of 5GHz 802.11ac. It happened often enough that I had it forget the slower network.
HTH
 
  • Like
Reactions: jaymeferreyra
Re slow WiFi and connection speed:
I've got both on so I don't know. I'll try to connect only 2,4 by disabling 5ghz on router. Unfortunately you can't choose which to connect manually with ROM
Does the 2.4GHz network use the same SSID as the 5GHz one? I'd suggest that's a bad idea; if the 2.4GHz signal is stronger, it may connect. I use different SSIDs (I just append "5" for 5GHz), then set the phone not to connect automatically to the slower one ("forget" it). I use the same AES PSK key, for simplicity, but that's not a requirement.
 
While it may be a problem, are you sure you're connecting to a fast network? I sometimes find slow WiFi because the phone (not Mi 10] has connected to my 2.4GHz 802.11n instead of 5GHz 802.11ac. It happened often enough that I had it forget the slower network.
HTH
My MI 10 only get around 15mb
My wife's Redmi Note 9 pro get 230mb
Same room with same wifi network

Enviado do meu Mi 10 através do Tapatalk
 
Last edited:
Health app stops working all the time, message every few minutes. Mi Note 10 PRO. I had to turn it off because it was blocking the phone
 
On Xiaomi mi 9t pro I've noticed since a few ROMs that WiFi connection is fine, but that there's no internet. I've read some more internet posts about this , through the years, but is this a problem more people have?
I have same problem. I also tried 2.4/5 ghz but there is no difference
 
Health app stops working all the time, message every few minutes. Mi Note 10 PRO. I had to turn it off because it was blocking the phone
Did you try to "clear all data" of the app in phone's settings?

Would be nice to give the "view summary" (crash log info) too. :)
 
I'm not a type of guy who always reboot my device(gauguin) running on 21.2.3 weekly. And when i do reboot my phone, The splash screen Mi appear and then my reboots again and show Screen with Mi again and then reboots again. I think it takes 6 times of it repeating sometimes 10 before finally showing the boot animation and finally booting my device. and then after a few minutes of using, my device hang, can't do anything until the screen turns off and when i turn on the phone again, i can use it and then this error shows even tho i can use my phone now.
34810


This error shows on what app I'm on, if it's chrome thats the error. If the phone hangs when I'm on device "System Ui isn't responding" or when I'm on facebook "Facebook isn't responding" Basically the error depends on what app I'm using.

Oh, and as you can see on status bar, exist the screenshot problem
 
After a week of testing I can safely say that this FINALLY fixed the wifi dropping issues on Mi 9 lite. Great rom as always, thanks!
 
Fod is broken coming from aosp rom (fod worked before) did clean install when trying to add fingerprint it's just completely black and crashes after raphael k20t pro can't activate nfc payment in my banking apps too all my sensor working used latest firmware tryed with magisk and without magisk too (clean flashed 2x time) Tryed recalibrate and this error occured https://ibb.co/fQ5tc7Y Settings crash error log (https://pastebin.com/z26JEUH1)
 
Fod is broken coming from aosp rom (fod worked before) did clean install when trying to add fingerprint it's just completely black and crashes after raphael k20t pro can't activate nfc payment in my banking apps too all my sensor working used latest firmware tryed with magisk and without magisk too (clean flashed 2x time) Tryed recalibrate and this error occured https://ibb.co/fQ5tc7Y Settings crash error log (https://pastebin.com/z26JEUH1)

did you format data in twrp ?
 
I install the weekly update simply through three points: select the firmware file. I never clean anything at the same time. Am I doing the right thing? Everything works well.
 
  • Like
Reactions: Poney70
Fod is broken coming from aosp rom (fod worked before) did clean install when trying to add fingerprint it's just completely black and crashes after raphael k20t pro can't activate nfc payment in my banking apps too all my sensor working used latest firmware tryed with magisk and without magisk too (clean flashed 2x time) Tryed recalibrate and this error occured https://ibb.co/fQ5tc7Y Settings crash error log (https://pastebin.com/z26JEUH1)
Read here and try this ..
You need a mirror and a white paper .. it works like a charm for me before 8 months on my toco , hope it works for you too ..
 
Read here and try this ..
You need a mirror and a white paper .. it works like a charm for me before 8 months on my toco , hope it works for you too ..
The sensor is just stops working u can try put jesus on it it's not gonna work it's 100% a rom bug older versions doesn't did this but I'm already reverted to aosp so maybe next year I try it again. But thanks for your help I appreciate it.
 
Fod is broken coming from aosp rom (fod worked before) did clean install when trying to add fingerprint it's just completely black and crashes after raphael k20t pro can't activate nfc payment in my banking apps too all my sensor working used latest firmware tryed with magisk and without magisk too (clean flashed 2x time) Tryed recalibrate and this error occured https://ibb.co/fQ5tc7Y Settings crash error log (https://pastebin.com/z26JEUH1)
Has your device's screen been replaced? If yes, you can't use MIUI 12 and have a working FOD... :(

Related thread about this issue => https://xiaomi.eu/community/threads/fingerprint-reboot-on-miui-12.57254/

:)
 
  • Wow
Reactions: Blastboom Strice
I have MI 10T and i cannot open sound & touch in my settings. Maybe it's already mentioned here...

Sent from my M2007J3SY using Tapatalk
 
Status
Not open for further replies.

Similar threads

  • Locked
HyperOS 1.0 24.3.25
Replies
169
Views
65K
  • Locked
HyperOS 1.0 24.3.18
Replies
115
Views
42K
  • Locked
HyperOS 1.0 24.3.11
Replies
128
Views
45K
  • Locked
HyperOS 1.0 24.3.4
Replies
150
Views
47K