MIUI 13 22.6.29


Status
Not open for further replies.
How to flash new betas with fastboot ? I am on stable build and something wrong with my PC I can't transfer files through cables, so I can't copy the rom in TWRP after formating data but flashing in fastboot working without problems
you can do this thing: -boot in twrp
-wipe data and dalvik/cache
-install rom(make sure you check inject twrp after installation box)
-reboot to recovery
-go to wipe-format data-yes
-reboot-system.
 
Hello,

I'm stuck on TWRP, no way to load Android.
TWRP wasn't reading the partition so I tried to repair, pass to EXT2 and back to EXT4.
All got stuck on TWRP, I could only go to fastboot, at boot it goes back to TWRP automatically. The message on TWRP console is :

"Android Rescue Party trigger! Possible solutions?
Either :
1) Wipe caches, and/or
2) Format data, and/or
3) Clean - Flash your ROM

The reported problem is:
"init_user0_failed"
Unable to decrypt FBE device."

TWRP version 3.6.2_12-MI10Ultra_v3.7_A12
First ROM present on device: xiaomi.eu_multi_MI10Ultra_22.6.15_v13-12-fastboot.zip
Second time I tried to flash with fastboot and XiaomiFlash the same ROM, successfully installed, but I was still stuck in the loop.
Third time I flashed xiaomi.eu_multi_MI10Ultra_22.6.29_v13-12.zip with TWRP, successfully, but I'm still stuck on the same loop, Android won't load.

Please I need help, I use the phone for work and actually I've been without for a two days.
How can i fix TWRP possibly without lose all my apps and data
Mate, your Rom is probably fine, but since you messed with the partitions / filesystem.. I afraid you have to format data I order to make it boot...



Sent from my Mi 11 Ultra.
 
  • Like
Reactions: biscoot
Hello,

I'm stuck on TWRP, no way to load Android.
TWRP wasn't reading the partition so I tried to repair, pass to EXT2 and back to EXT4.
All got stuck on TWRP, I could only go to fastboot, at boot it goes back to TWRP automatically. The message on TWRP console is :

"Android Rescue Party trigger! Possible solutions?
Either :
1) Wipe caches, and/or
2) Format data, and/or
3) Clean - Flash your ROM

The reported problem is:
"init_user0_failed"
Unable to decrypt FBE device."

TWRP version 3.6.2_12-MI10Ultra_v3.7_A12
First ROM present on device: xiaomi.eu_multi_MI10Ultra_22.6.15_v13-12-fastboot.zip
Second time I tried to flash with fastboot and XiaomiFlash the same ROM, successfully installed, but I was still stuck in the loop.
Third time I flashed xiaomi.eu_multi_MI10Ultra_22.6.29_v13-12.zip with TWRP, successfully, but I'm still stuck on the same loop, Android won't load.

Please I need help, I use the phone for work and actually I've been without for a two days.
How can i fix TWRP possibly without lose all my apps and data
You can try to flash ROM,reboot to recovery,format data and reboot system.If this thing will not work,go in fastboot mode and flash stock rom./or if you can copy from your pc try to install stock recovery ROM.
 
You can try to flash ROM,reboot to recovery,format data and reboot system.If this thing will not work,go in fastboot mode and flash stock rom./or if you can copy from your pc try to install stock recovery ROM.
Formatting data will make me lose all my apps and data?
That's what I'm trying to avoid.
 
Mate, your Rom is probably fine, but since you messed with the partitions / filesystem.. I afraid you have to format data I order to make it boot...



Sent from my Mi 11 Ultra.
I'm afraid too, but I just followed normal procedure when the system folders can't be read or decrypted, trying to repair and change file system, isn't correct?
 
Mine works

From my poco f3 via Tapatalk
096de0fb23bfeffac3e64a39f8a18d3d.jpg
Thanks for your feedback.
This Xiaomi Cloud Backup issue happens randomly for some users and device models and still without fix or workaround yet. - Report

EDITED: Report had the wrong link
 
Last edited:
If he can decrypt in twrp,yes he can see all files in Pc and copy them...
Nope, no decrypt.
I can access the device only with the command fastboot, not even adb.

At this point I wasted two days trying to recover my phone, I'll wipe everything al start from scratch, at this point is about time. In some hours I should be able to be again working, I have Google backup and Xiaomi backup, I will be back at 90%.

Wish me good luck, hope the boot it's not Fkd.
 
hi i try to update my poco f3 with this new beta, but i see in the before patch i have a sh to update but this version dont exist this, how update via sh or update the room, thanks

sh xiaomi.eu_multi_HMK40_POCOF3_22.4.21_v13-12-fastboot/linux_fastboot_update_rom.sh
 

Attachments

  • Screenshot from 2022-07-01 10-41-04.png
    Screenshot from 2022-07-01 10-41-04.png
    31.4 KB · Views: 136
You can try to flash ROM,reboot to recovery,format data and reboot system.If this thing will not work,go in fastboot mode and flash stock rom./or if you can copy from your pc try to install stock recovery ROM.
Ok, I tried this too, nothing, it's still stuck in TWRP...... !?! At the end of the installation says in red that "some block cannot be opened"

Can you please get me a secure link of a stock recovery ROM?
You mean Chinese? Weekly?
Can this be fine? miui_CASPRE_22.3.23_33794b9290_12.0.zip

This is really stressful...... :(
 
Ok, I tried this too, nothing, it's still stuck in TWRP...... !?! At the end of the installation says in red that "some block cannot be opened"

Can you please get me a secure link of a stock recovery ROM?
You mean Chinese? Weekly?
Can this be fine? miui_CASPRE_22.3.23_33794b9290_12.0.zip

This is really stressful...... :(
I tried to install that ROM from here : https://xiaomirom.com/en/rom/mi-10-ultra-cas-china-fastboot-recovery-rom/
and I'm still stuck in the TWRP loop.

Any advice on how to reset everything?
Should I install again TWRP?
Should I try a fastboot stock (Chinese?) ROM ?
 
How to install another twrp? I have Nebrassy twrp now

From my poco f3 via Tapatalk
1. fastboot command: fastboot boot twrp.img
(Change language with the right button, enter pin)
2. copy the downloaded twrp.img to the phone.
3. Install
4. Install Image -> choose twrp.img
5. Install Recovery Ramdisk
to check: back to main menu
6. reboot to recovery (should boot twrp again)
7. Then reboot to system

 
1. fastboot command: fastboot boot twrp.img
(Change language with the right button, enter pin)
2. copy the downloaded twrp.img to the phone.
3. Install
4. Install Image -> choose twrp.img
5. Install Recovery Ramdisk
to check: back to main menu
6. reboot to recovery (should boot twrp again)
7. Then reboot to system

Can I ask why two times plus "Install Recovery Ramdisk"?
I simply installed the twrp.img from fastboot? Not enough?
 
  • Like
Reactions: Dragon16
3.7 is correct, after booting via fastboot just install twrp.img like the instruction says.

You ask for help in a xiaomi.eu weekly rom thread, but you try to install official rom instead. This is not the right place.
 
3.7 is correct, after booting via fastboot just install twrp.img like the instruction says.

You ask for help in a xiaomi.eu weekly rom thread, but you try to install official rom instead. This is not the right place.
Darki, I tried to install the weekly too, but it's not working.
I Installed the TWRP.img from TWRP too, nothing changed, I'm still stuck on TWRP loop.
Several people told me to try to install a stock ROM to get out of this TWRP loop, what are your suggestions?
 
I tried to install that ROM from here : https://xiaomirom.com/en/rom/mi-10-ultra-cas-china-fastboot-recovery-rom/
and I'm still stuck in the TWRP loop.

Any advice on how to reset everything?
Should I install again TWRP?
Should I try a fastboot stock (Chinese?) ROM ?
Your phone was china version?You need to flash stock ROM (EEA,Global,India or China)(depends on your phone ) you can give me a Telegram or Discord and I will help you with ROM link.(because idk if i can share links here:))
 
Status
Not open for further replies.

Similar threads

  • Locked
HyperOS 1.0 24.7.1
Replies
54
Views
43K
Replies
51
Views
44K
  • Locked
HyperOS 1.0 24.7.15/17
Replies
87
Views
52K