HyperOS 1.0 24.4.22

[Hackintosh98]

Has anyone tried with the Italian language? Are there any bugs with the language?

 

[Supermechf]

Need help. Cmd stuck on "Waiting for device...". Any suggestions?

 

[Supermechf]

Need help. Cmd stuck on "Waiting for device...". Any suggestions?

Can i at least close the cmd or something? im getting paranoid

 

[Hackintosh98]

Can i at least close the cmd or something? im getting paranoid

before use adb command, make sure that your device is plugged correctly on your phone. Try with Adb devices and see if you can see your device
P.S. if your cmd is stuck on Waiting for device you can close your cmd, since nothing started for installation

 

[stathis95194]

Can i at least close the cmd or something? im getting paranoid

Waiting for device means your phone didn't connect, you can close the command prompt.
Make sure you have USB debugging enabled, adb drivers installed. If you do, try connecting to a USB 2.0 port instead of 3.0

Sent from my 2210132G using Tapatalk

 

[Supermechf]

before use adb command, make sure that your device is plugged correctly on your phone. Try with Adb devices and see if you can see your device
P.S. if your cmd is stuck on Waiting for device you can close your cmd, since nothing started for installation

ok. will try. thanks

 

[Supermechf]

Waiting for device means your phone didn't connect, you can close the command prompt.
Make sure you have USB debugging enabled, adb drivers installed. If you do, try connecting to a USB 2.0 port instead of 3.0

Sent from my 2210132G using Tapatalk

still stuck

 

[stathis95194]

still stuck

Is it the first time you flash through fastboot? Did you reboot your device to flashboot?

Sent from my 2210132G using Tapatalk

 

[Supermechf]

Is it the first time you flash through fastboot? Did you reboot your device to flashboot?

Sent from my 2210132G using Tapatalk

First-time, yes. I already installed adb drivers, enabled USB debugging and used the adb cmd to set the device to fastboot mode. Now I really can't try flashing for some hours bc of irl endeavors, but will try it again later and get back to you. Many thanks anyways

 

[SISPANAGHS]

You might have an outdated TWRP Version then , try using TWRP 8.6 by SKKK. I have flashed it since weeks witg that and it works fine for me on Mondrian.

used orange fox.next time try skkk.
thanks

 

[Iain_B]

Need help. Cmd stuck on "Waiting for device...". Any suggestions?

Open the cmd box again, and run 'fastboot devices' to make sure that the connection is correct.
(The result should be a code and 'device' 'fastboot').
If you do not get the correct result, check/change your cable and/or the computer port that you are using.

 

[Supermechf]

Open the cmd box again, and run 'fastboot devices' to make sure that the connection is correct.
(The result should be a code and 'device').
If you do not get the correct result, check/change your cable and/or the computer port that you are using.

Will try that too. Thanks m8

 

[ntlkr]

Need help. Cmd stuck on "Waiting for device...". Any suggestions?

Was the same thing for me at the beginning.
I had to choose the fastboot driver manually from device manager via the winusb.inf file inside driver package.

 

[Supermechf]

Was the same thing for me at the beginning.
I had to choose the fastboot driver manually from device manager via the winusb.inf file inside driver package.

Thanks. Will try

 

[Masbucho]

I was update with the latest version at my NUWA. I found the calculator WORKED
Thank you

 

[taz80000]

Too early to say.

Are you sure you didn't disable Always on display app?even with a wipe and a reinstallation the problem persists and even going through the settings menu when I click on the lock screen box I get this error message

 

[Kydaix]

Hello, I have exactly the same problem on THOR (clean install with fb)

 

[maffanto]

on Mondrian no longer buy the lock screen after the always on display. anyone have the same problem? Even Google notifications don't arrive.

 

[ZondaSJ]

CUPID here... Everything is ok, just the same bug of permanent notification (netflix, youtube, etc) when cast to chromecast

 

[kevindeoz]

CUPID here... Everything is ok, just the same bug of permanent notification (netflix, youtube, etc) when cast to chromecast

My wife has an apollo with global ROM and I have a cupid device with Xiaomi.eu DEV. Both of them have the exact same problem when casting some content to our Mi Box, so I think this problem is more like a Xiaomi thing

 

[HerrJohnssen]

!! Update your TWRP before updating !!

Before updating my TWRP, I was greeted with many "this app stopped working" - popups, but now after updating everything seems fine. Was a bit of a hassle to get it working, but it finally does

 

[svetlio359]

Hello
On diting have goole play services stop working occasionally but didn't find any problem with google

 

[KGVER]

Hello
On diting have goole play services stop working occasionally but didn't find any problem with google

I have latest twrp from skkk and app still stopped working.Even after installing using fastboot, the result is the same.

Try this adb command by one line :

adb shell pm compile -a -f -r cmdline --full
adb reboot

 

[Hamich]

I have latest twrp from skkk and app still stopped working.Even after installing using fastboot, the result is the same.ADB command will mark each entry failed.Version from week 15.4 working normally.I will try reflash recovery.

 

[taz80000]

I still think that I'm not the only one who encounters this problem with the lock screen?

View attachment 52631