MIUI 10 8.11.22/23

[graw2]

@graw2 thanks for the LTE switch. Can you investigate blinking launcher icons in full screen mode. Steps: use full screen mode, go to any app, swipe from bottom to go to home screen - done icon blinks. If it's miui problem we can start topic in miui forums and get it fixed.

4G/LTE switch thanks to @Igor

Do you have Mix2S too? I have checked on my device and I can not reproduce blinking app icons. Can you make screen recorder how it looks like?

 

[pi4a7a]

4G/LTE switch thanks to @Igor

Do you have Mix2S too? I have checked on my device and I can not reproduce blinking app icons. Can you make screen recorder how it looks like?

Yes i have Mix 2S too. Here is the video : https://drive.google.com/open?id=1GJq__IkDq78Z0ldNuQfDvFxDGYmurgcL I uploaded it to gdrive cause idk how to do it here in the forum. While we are on topic bugs give this a look, the video speaks for itself.
https://drive.google.com/open?id=1poRfW__y7zXJjjNaETO6mPmGdKfWOcG5

 

[fmotta]

I see a new version for Mi Mix 3 on AFH. Any chance this is working? As you well know the previous led to bootloop.
I remain at your disposal if you need a tester and thanks for your work

 

[Tiago Barbosa]

bootloop in new build for mi mix 3

 

[dbrito]

Hi All. If I install this new update with OTA, I will lose my data? My Xiaomi Mi Mix 2 will be wiped?

Thanks

 

[fmotta]

bootloop in new build for mi mix 3

Definitely something wrong with boot.img IMHO

 

[brutale91o]

CHANGELOG 8.11.22

Statusbar and Quick Settings
New - NFC toggle added
Optimization - LTE icon changed to 4G

MiCloud
Fix - Fixed MiCloud backup

Network Location
Optimization - Optimize network location services


DELAYED DEVICES:
MI8SE, MIMIX3, HM6, HM6A, MIMAX3

8.11.23 released for devices:
MI8, MI8EE, MI8Pro, MI8Lite, MIX2S, HM6Pro, POCOF1, HMNote6Pro

I have difficulty in recording the 3D face with mi 8 explorer rom eu 8.11.23 , language italian, when he says he looks at everything ok, look left all right, when he says he lowers his head no, he only goes to the head, but then asks me to lower his head anyway no more

 

[frofa]

I have found that using an active stylus on my Mi Pad 4 plus ("clover") does not work well. The line it draws is chopped up into dots or small lines, and is hardly continuous. Sometimes, funnily, it works a bit better than other times, but never to my satisfaction. On my Mi Note 3 ("jason") with the same ROM, the stylus works perfectly well, drawing continuous lines even with the fastest movements.
So, the stylus is fine, and the problem of choppiness comes from the Mi Pad.

 

[frofa]

Hi All. If I install this new update with OTA, I will lose my data? My Xiaomi Mi Mix 2 will be wiped?

No, BUT you should always have a backup of all your important data anyway, so that it wouldn't matter if data were lost/wiped. If everything goes right, though, no data will be lost by doing an OTA update. Don't disregard this advice, there will come the time you lose data. It is not a matter of if or how, but a matter of when.

 

[graw2]

Yes i have Mix 2S too. Here is the video : https://drive.google.com/open?id=1GJq__IkDq78Z0ldNuQfDvFxDGYmurgcL I uploaded it to gdrive cause idk how to do it here in the forum. While we are on topic bugs give this a look, the video speaks for itself.
https://drive.google.com/open?id=1poRfW__y7zXJjjNaETO6mPmGdKfWOcG5

I don't have that issue, and I have never experienced the same. Check my screen recorder below:

https://drive.google.com/file/d/10EY0ENvlOjZYLGNXe_Lq0l22BBkxz9nT/view?usp=drivesdk

Sent from my MIX 2S using Tapatalk

 

[dbrito]

No, BUT you should always have a backup of all your important data anyway, so that it wouldn't matter if data were lost/wiped. If everything goes right, though, no data will be lost by doing an OTA update. Don't disregard this advice, there will come the time you lose data. It is not a matter of if or how, but a matter of when.

OK, thanks. One more thing, please. The update will be installed automatically or I need to install a file called NO VERIFY? I say that because I don't know if a need to install via TWRP or it will be automatically.

 

[Tiago Barbosa]

bootloop in build uploaded 12:00pm for mi mix 3

 

[Peraltta]

on mi mix 2s proximity sensor not working . , at the begin i update miui 10

Same problem. Sloved without a case. Works perfect.

 

[frofa]

OK, thanks. One more thing, please. The update will be installed automatically or I need to install a file called NO VERIFY? I say that because I don't know if a need to install via TWRP or it will be automatically.

when you use the updater app, it will download the update, then reboot automatically into TWRP and install it. There is nothing else you have to do, but keep in mind that you will lose root, so you have to flash magisk again after updating. Also, if you do this, do at least two reboots after flashing magisk, otherwise the phone will feel sluggish and have massive lags. So, re-boot after installing the update, then re-boot into TWRP to flash magisk, wipe Dalvik/cache afterwards, then re-boot to the system. Log in, then restart the phone once more.
If you don't root your phone, just using the updater is enough.

 

[graw2]

on mi mix 2s proximity sensor not working . , at the begin i update miui 10

Proximity sensor works unstable during phone calls on Mix2S out of the box...

Sent from my MIX 2S using Tapatalk

 

[dbrito]

when you use the updater app, it will download the update, then reboot automatically into TWRP and install it. There is nothing else you have to do, but keep in mind that you will lose root, so you have to flash magisk again after updating. Also, if you do this, do at least two reboots after flashing magisk, otherwise the phone will feel sluggish and have massive lags. So, re-boot after installing the update, then re-boot into TWRP to flash magisk, wipe Dalvik/cache afterwards, then re-boot to the system. Log in, then restart the phone once more.
If you don't root your phone, just using the updater is enough.

I appreciate you for help me. Thanks a lot

 

[josua98x]

I don't have that issue, and I have never experienced the same. Check my screen recorder below:

https://drive.google.com/file/d/10EY0ENvlOjZYLGNXe_Lq0l22BBkxz9nT/view?usp=drivesdk

Sent from my MIX 2S using Tapatalk

for me the app blinkin happens when i set the animations in developer mode to 0.5, hope it helps

 

[Amarsimos]

thank you for this rom,its so awesome ,but i can not use my fingerprint ,could you tell me how can i repair it thank you

 

[graw2]

for me the app blinkin happens when i set the animations in developer mode to 0.5, hope it helps

I keep that options on default values x1. I have never touched them... Seems it causes the difference

Sent from my MIX 2S using Tapatalk

 

[Kingsman]

What's the difference between both roms 8.11.22/23

 

[MrFlyaway]

Play store says:
"Not supported on your device."

Have installed the app from the official website, not from Play Store. Mi5

Отправлено с моего MI 5 через Tapatalk

 

[Giovanni89]

fix smartlock of the Google, don't work. fix warning data download, even if set the warning above 100 mb always warns also for the download of 5 mb.

 

[jin_60]

Mi8 updated, thx guys.
Always this f...... Auto brightness bug... Auto increase but no auto decrease
... China devs are sometimes really bad

 

[graw2]

Mi8 updated, thx guys.
Always this f...... Auto brightness bug... Auto increase but no auto decrease
... China devs are sometimes really bad

Will be fixed at next release...

Sent from my MIX 2S using Tapatalk

 

[jin_60]

Will be fixed at next release...

Sent from my MIX 2S using Tapatalk

Great news ! Thx
It's a real battery killer :S