MIUI 10 9.7.4


Do you like this MIUI version?

  • Total voters
    293
Status
Not open for further replies.
Hi,

I've a problem with the chrome brwoser since many rom-versions:

25286


There are black shadows in all corners. Does anyone else have this problem? Is there a solution for this?
 
  • Like
Reactions: k-vadim7
Mi 8 here, might be the worst release since i use this rom (ie: since i receive the phone lol).

> double tap to wake make the screen flickering to death
> black screen freeze on phone wake up
> lockscreen overlaying everything after phone unlocked
> pulldown notification screen remaining in "overlay" without asking it.
> bugs and lags in multitasking (small vignettes remaining on screen after switching app)

It seems that all thoses bugs à lockscreen related

i go back to previous release but keep up the good work :)
 
  • Like
Reactions: Logoron
Phakaaa said:
Basically i followed these instructions
To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.
Click to expand...
You need to go to TWRP, go to FORMAT, type "yes" to fully re-format the storage to remove the encryption, before you install xiaomi.eu ROM.
This a ”one-off" requirement for initial install, then you should be able to "dirty flash" over the top for following weeks releases.
 
Kilbane said:
Mi 8 here, might be the worst release since i use this rom (ie: since i receive the phone lol).

> double tap to wake make the screen flickering to death
> black screen freeze on phone wake up
> lockscreen overlaying everything after phone unlocked
> pulldown notification screen remaining in "overlay" without asking it.
> bugs and lags in multitasking (small vignettes remaining on screen after switching app)

It seems that all thoses bugs à lockscreen related

i go back to previous release but keep up the good work :)
Click to expand...
Exactly the same errors for me too.

Sent from my MI 8 UD using Tapatalk
 
  • Like
Reactions: Logoron
Kilbane said:
Mi 8 here, might be the worst release since i use this rom (ie: since i receive the phone lol).

> double tap to wake make the screen flickering to death
> black screen freeze on phone wake up
> lockscreen overlaying everything after phone unlocked
> pulldown notification screen remaining in "overlay" without asking it.
> bugs and lags in multitasking (small vignettes remaining on screen after switching app)

It seems that all thoses bugs à lockscreen related

i go back to previous release but keep up the good work :)
Click to expand...
Me too(MI8)
 
GreasyMonkey1960 said:
You need to go to TWRP, go to FORMAT, type "yes" to fully re-format the storage to remove the encryption, before you install xiaomi.eu ROM.
This a ”one-off" requirement for initial install, then you should be able to "dirty flash" over the top for following weeks releases.
Click to expand...
But now i cant find the zip from the rom
 
GreasyMonkey1960 said:
You need to go to TWRP, go to FORMAT, type "yes" to fully re-format the storage to remove the encryption, before you install xiaomi.eu ROM.
This a ”one-off" requirement for initial install, then you should be able to "dirty flash" over the top for following weeks releases.
Click to expand...
I GO TO SDCARD File and i only find files with BIG NAMES
 
Guys I'm having problems with the "open with" feature: every time I need to open a link/file/whatever from an app to another I get asked to choose which app to use... And it keeps doing it over and over, no matter if I set to "always use this" every single time.

Anyone with this issue? I'm facing it since previous release... Can't realise what could I "reset" to make it stop boring me!


I also confirm the untouchable PiP issue on both Max 3 and Mi Pad 4

- Tapatalked from my Mi Max 3 -​
 
9.74 running good on RN5 Pro only when unrooted. When I boot into recovery to flash magisk 19.3, it boots to the point where I enter PIN and PW, then shuts off and reboots. Any idea why that is? Thanks.
 
Todos morning i see a batery drain on RN7, and how i can make to go back to a previus version, the last i did the rom ask me for a password, i put muy previus and the same password i use and nothing happend

Enviado desde mi Redmi Note 7 mediante Tapatalk
 
Last edited:
After the clean flash and two days with this rom the errors on my Mi Mix 3 coming again. 1st the screen was black, not usable until a restart. 2nd i couln´t do any operation, the screen was inoperable. When i tried to restart, there upcoming graphical overlays - three or four apps at the same times were displayed. I restarted again and wantes to go into recovery mode, but I saw in the settings, that I couldn´t activate the developer options, so the pc wasn´t able to recognice my device. I´ve rebooted manually into recovery and flashed the version from last week. All problems are away. Don´t know, what´s wrong in this version for some devices, but some oft the changes coming with this rom are creating basic system bugs. Hope, this will be fixed in the next version... a backup is more important than before in the near future.
 
Phakaaa said:
Basically i followed these instructions
To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.
Click to expand...
After twrp flashing go to wipe -> format data and yes and restart twrp, then transfer the rom to internal storage and flash it and reboot. You did it wrong I'm afraid.
 
dogiex said:
After twrp flashing go to wipe -> format data and yes and restart twrp, then transfer the rom to internal storage and flash it and reboot. You did it wrong I'm afraid.
Click to expand...
i did exactly with the video put the rom installed and then when finished installing it showed me to wipe and then i wipe and then i factory reset also and then i reboot and then stuck at mi logo
 
THEJAJO said:
The OTA on Redmi 4X / santoni / HM4X doesn't work:
View attachment 25285
The Clear all data has been run on the Updater app few times.
Click to expand...
Please, search in this forum before post this. Igor has been said that in China beta ROM some devices had issues with this update, so, he switched off the availability in OTA.
If you want to install this ROM, please, download it and update manually by selecting the package from this screen.
 
Phakaaa said:
i did exactly with the video put the rom installed and then when finished installing it showed me to wipe and then i wipe and then i factory reset also and then i reboot and then stuck at mi logo
Click to expand...
The video did it wrong too.
If you read carefully there are steps in original post how to install the rom:

* TWRP Recovery Zip DOWNLOAD or TWRP.ME
* FORMAT /data partition (NEVER wipe System or Persist!)
* Copy our ROM to the internal storage
* Install our ROM
* Reboot
* done
 
Mi 9

Have any one same issue with me, when AOD, and I wanna fingerprint sensor unlock, the AOD Clock going blank with flicker?
 
Status
Not open for further replies.

Similar threads

ingbrzy
  • Sticky
HyperOS 2.0 HyperOS 2.0 STABLE RELEASE
Replies
266
Views
103K
HyperOS
Igor Eisberg
Igor Eisberg
ingbrzy
  • Locked
HyperOS 1.0 24.7.28 (Final)
Replies
292
Views
279K
HyperOS
Igor Eisberg
Igor Eisberg
ingbrzy
  • Locked
HyperOS 1.0 24.7.1
Replies
54
Views
42K
HyperOS
Mistery88
M
ingbrzy
  • Locked
HyperOS 1.0 24.7.22/25/26
Replies
51
Views
38K
HyperOS
Ahaba
A
ingbrzy
  • Locked
HyperOS 1.0 24.7.15/17
Replies
87
Views
44K
HyperOS
KGVER
KGVER
Top Bottom
Back