Fix Networks for GARNET

gogocar62 · Oct 23, 2024

braunimor said:
Thanks bro! Sorry I'm doing this by first time. What's the meaning of Install in TWRP:?

It means you don't need a computer to install the patch.
In case you already have TWRP installed on your device.

Do you use a custom ROM from xiaomi.eu at all?

braunimor · Oct 23, 2024

Thanks so much. After connecting in fastboot and run the command, there's an error:

and when using another version (garnet v14.0.15) there's an error "flashing is not allowed in lock state". What should I do?

braunimor · Oct 23, 2024

gogocar62 said:
It means you don't need a computer to install the patch.
In case you already have TWRP installed on your device.

Do you use a custom ROM from xiaomi.eu at all?

Ok. So I just copy the zip into the phone storage and run the thing? How should I run this command directly in my phone once copied?

SOrry, I have no idea what custom ROM is. I bought this f@#$g Xiomi redmi and suddenly stopped to work

gogocar62 · Oct 23, 2024

It looks like you are using an official ROM (SW). You also have no idea what you're doing.
If you have an official ROM and a locked bootloader, this forum is not for you. This signal processing only affects custom ROMs from xiaomi.eu.

braunimor · Oct 23, 2024

gogocar62 said:
It looks like you are using an official ROM (SW). You also have no idea what you're doing.
If you have an official ROM and a locked bootloader, this forum is not for you. This signal processing only affects custom ROMs from xiaomi.eu.

Thanks, bro. How can I know if I am using an official ROM or which one is mine? Sorry, this is the only site where I found some troubleshooting advice

gogocar62 · Oct 23, 2024

If you bought the device as a new piece and you personally did not unlock the bootloader and install the ROM from this forum, you have an official ROM.
Here is the link to the Xiaomi site: https://new.c.mi.com/global/

ITS ALI · Nov 2, 2024

Just a Question i just recently update from OS1.0.8 to OS1.0.13 xiaomi.eu the problem im facing is Sever lagging & i try to flash modem from @gogocar62 i will wont able to recover my signals now i just download the OS1.0.14 global to flash the modem then i didn't found it then after going through all the conversation now i found out "NON-HLOS.bin" is Modem i hope it will work or i have to lose all my data to re flash the ROM to see the where is the problem im facing after flashing the update

say good luck

Edit: After flashing Modem File from OS1.0.14 global in OS1.0.13 xiaomi.eu the problem has been Solved i will attach the files here.

@gogocar62 Please Update the Form File link for GARNET Modem so nobody have to download 7Gb Fastboot file for global to only update Modem File.

https://www.mediafire.com/file/6a0wln3clpukwf8/NON-HLOS.bin/file

tzifosf1 · Nov 3, 2024

You need to rename NON-HLOS.bin to modem.img and use the script (bat file) from the 1st post. Right?

Or you can do it without renaming it? like:

Code:

@echo off
cd %~dp0
set fastboot=bin\windows\fastboot.exe
if not exist %fastboot% echo %fastboot% not found. & pause & exit /B 1
echo Waiting for device...
set device=unknown
for /f "tokens=2" %%D in ('%fastboot% getvar product 2^>^&1 ^| findstr /l /b /c:"product:"') do set device=%%D
if "%device%" neq "garnet" echo Compatible devices: garnet & echo Your device: %device% & pause & exit /B 1

echo ##################################################################
echo Please wait. The device will reboot when installation is finished.
echo ##################################################################
%fastboot% set_active a
%fastboot% flash modem_ab NON-HLOS.bin
%fastboot% reboot

gogocar62 · Nov 3, 2024

The Modem Fix in the first post was updated from Global OS1.0.15.0.UNRMIXM.

ITS ALI · Nov 4, 2024

gogocar62 said:
The Modem Fix in the first post was updated from Global OS1.0.15.0.UNRMIXM.

Did it was recently updated?

ITS ALI · Nov 4, 2024

Actually i just rename it and flash with the script of @gogocar62

tzifosf1 said:

You need to rename NON-HLOS.bin to modem.img and use the script (bat file) from the 1st post. Right?

Or you can do it without renaming it? like:

Code:

@echo off
cd %~dp0
set fastboot=bin\windows\fastboot.exe
if not exist %fastboot% echo %fastboot% not found. & pause & exit /B 1
echo Waiting for device...
set device=unknown
for /f "tokens=2" %%D in ('%fastboot% getvar product 2^>^&1 ^| findstr /l /b /c:"product:"') do set device=%%D
if "%device%" neq "garnet" echo Compatible devices: garnet & echo Your device: %device% & pause & exit /B 1

echo ##################################################################
echo Please wait. The device will reboot when installation is finished.
echo ##################################################################
%fastboot% set_active a
%fastboot% flash modem_ab NON-HLOS.bin
%fastboot% reboot

tzifosf1 · Nov 4, 2024

Thank you for your asnwer, but there is no reason to do this now, gogocar62 updated the Garnet_modem_global.zip from 1st post!

tzifosf1 · Nov 4, 2024

ITS ALI said:
Did it was recently updated?

it was updated about an hour ago

mnikolce · Nov 5, 2024

gogocar62 said:
The Modem Fix in the first post was updated from Global OS1.0.15.0.UNRMIXM.

Does anybody know what is improved in that modem.img file?

Sent from my 23122PCD1G using Tapatalk

tzifosf1 · Nov 7, 2024

After installing xiaomi.eu_GARNET_OS1.0.13.0.UNRCNXM_14 in Poco X6 (Garnet with UNRMIXM 1.0.15) SIM1 was not working. Wifi was OK. Sim2 was ok too.
Then I installed the latest Garnet_modem_global.zip but still SIM1 is not working. Is it a known bug? Can anyone help with this?

mnikolce · Nov 7, 2024

tzifosf1 said:
After installing xiaomi.eu_GARNET_OS1.0.13.0.UNRCNXM_14 in Poco X6 (Garnet with UNRMIXM 1.0.15) SIM1 was not working. Wifi was OK. Sim2 was ok too.
Then I installed the latest Garnet_modem_global.zip but still SIM1 is not working. Is it a known bug? Can anyone help with this?

did you try reflash UNRMIXM 1.0.15?

tzifosf1 · Nov 7, 2024

No! I haven't tried this! with "stock UNRMIXM 1.0.15" just after unlocking SIM1 slot worked fine. Then after flashing "xiaomi.eu_GARNET_OS1.0.13.0.UNRCNXM_14" with windows_install_and_format_data.bat I saw the problem with slot SIM1. Reboot in Recovery and flashed the new modem.img (using Garnet_modem_global.zip). I hoped that this would solved the problem, but the problem persisted!. So I tried to re-flash the same xiaomi.eu rom for Garnet ("xiaomi.eu_GARNET_OS1.0.13.0.UNRCNXM_14"), again with install&formatData. The same problem. And re-flashed again the new modem.img (using Garnet_modem_global.zip). Then I started restoring the phone with my applications etc....

mnikolce · Nov 7, 2024

tzifosf1 said:
No! I haven't tried this! with "stock UNRMIXM 1.0.15" just after unlocking SIM1 slot worked fine. Then after flashing "xiaomi.eu_GARNET_OS1.0.13.0.UNRCNXM_14" with windows_install_and_format_data.bat I saw the problem with slot SIM1. Reboot in Recovery and flashed the new modem.img (using Garnet_modem_global.zip). I hoped that this would solved the problem, but the problem persisted!. So I tried to re-flash the same xiaomi.eu rom for Garnet ("xiaomi.eu_GARNET_OS1.0.13.0.UNRCNXM_14"), again with install&formatData. The same problem. And re-flashed again the new modem.img (using Garnet_modem_global.zip). Then I started restoring the phone with my applications etc....

after windows_install_and_format_data.bat xiaomi.eu you rebooted in recovery? which recovery? I have TWRP 3.7.1_12-Nebrassy - maybe you don't have proper (or just the stock recovery) and perhaps it didn't install Garnet_modem_global.zip...

NOSS8 · Nov 7, 2024

Extract modem.img from newer firmware(EEA)

XM Firmware Updater

The ultimate script that provides firmware packages for Xiaomi devices.

xmfirmwareupdater.com

Try with this fastboot CMD:
fastboot set_active a
fastboot flash modem_ab modem.img
fastboot reboot

tzifosf1 · Nov 7, 2024

mnikolce said:
after windows_install_and_format_data.bat xiaomi.eu you rebooted in recovery? which recovery? I have TWRP 3.7.1_12-Nebrassy - maybe you don't have proper (or just the stock recovery) and perhaps it didn't install Garnet_modem_global.zip...

I flash it from elevated (Run as Administrator) command prompt in Windows with Fastboot, running the BAT file. I don't have installed TWRP or Ofox. They are not necessary to flash!

tzifosf1 · Nov 7, 2024

NOSS8 said:
Extract modem.img from newer firmware(EEA)

XM Firmware Updater

The ultimate script that provides firmware packages for Xiaomi devices.

xmfirmwareupdater.com

Try with this fastboot CMD:
fastboot set_active a
fastboot flash modem_ab modem.img
fastboot reboot

This is what run in the BAT file (windows_modem.bat) of the Garnet_modem_global.zip ( contains modem.img of Global OS1.0.15.0.UNRMIXM ) :

Code:

@echo off
cd %~dp0
set fastboot=bin\windows\fastboot.exe
if not exist %fastboot% echo %fastboot% not found. & pause & exit /B 1
echo Waiting for device...
set device=unknown
for /f "tokens=2" %%D in ('%fastboot% getvar product 2^>^&1 ^| findstr /l /b /c:"product:"') do set device=%%D
if "%device%" neq "garnet" echo Compatible devices: garnet & echo Your device: %device% & pause & exit /B 1

echo ##################################################################
echo Please wait. The device will reboot when installation is finished.
echo ##################################################################
%fastboot% set_active a
%fastboot% flash modem_ab images\modem.img
%fastboot% reboot

tzifosf1 · Nov 7, 2024

NOSS8 said:
Extract modem.img from newer firmware(EEA)

XM Firmware Updater

The ultimate script that provides firmware packages for Xiaomi devices.

xmfirmwareupdater.com

Try with this fastboot CMD:
fastboot set_active a
fastboot flash modem_ab modem.img
fastboot reboot

Tried flashing modem.img of "fw_garnet_miui_GARNETEEAGlobal_OS1.0.21.0.UNREUXM_91cb2ae185_14.0.zip" which is the latest EEA, same issue....

Thankfully SIM2 slot is OK!!!

ITS ALI · Nov 10, 2024

Try mine modem file maybe it will work

tzifosf1 said:
After installing xiaomi.eu_GARNET_OS1.0.13.0.UNRCNXM_14 in Poco X6 (Garnet with UNRMIXM 1.0.15) SIM1 was not working. Wifi was OK. Sim2 was ok too.
Then I installed the latest Garnet_modem_global.zip but still SIM1 is not working. Is it a known bug? Can anyone help with this?

ITS ALI said:
Just a Question i just recently update from OS1.0.8 to OS1.0.13 xiaomi.eu the problem im facing is Sever lagging & i try to flash modem from @gogocar62 i will wont able to recover my signals now i just download the OS1.0.14 global to flash the modem then i didn't found it then after going through all the conversation now i found out "NON-HLOS.bin" is Modem i hope it will work or i have to lose all my data to re flash the ROM to see the where is the problem im facing after flashing the update

say good luck

Edit: After flashing Modem File from OS1.0.14 global in OS1.0.13 xiaomi.eu the problem has been Solved i will attach the files here.

@gogocar62 Please Update the Form File link for GARNET Modem so nobody have to download 7Gb Fastboot file for global to only update Modem File.

https://www.mediafire.com/file/6a0wln3clpukwf8/NON-HLOS.bin/file

tzifosf1 · Nov 10, 2024

ITS ALI said:
Try mine modem file maybe it will work

YES!!! Slot SIM1 is working, 5G, VoLTE all seems to be OK!!!

What the hell is Xiaomi doing? Different modem in the same phones?

mnikolce · Nov 10, 2024

So what is the conclusion? Garnet devices previously with UNREUXM and unrMIxm rom should flash unrMIxm modem.img for best results? Not the unrEUxm modem

Sent from my 23122PCD1G using Tapatalk

Fix Networks for GARNET

XM12 Tester

Members

Members

XM12 Tester

Members

XM12 Tester

Members

Members

XM12 Tester

Members

Members

Members

Members

Members

Members

Members

Members

Members

Members

Members

Members

Members

Attachments

Members

Members

Members

Similar threads

We value your privacy