MaD_mAnIaC
Members
- 2 Jun 2024
- 5
- 15
HyperOS 2.0 HyperOS 2.0 STABLE RELEASE
- Thread starter ingbrzy
- Start date
- 6 Oct 2016
- 10,349
- 322
Rober D. Nuño
Members
- 10 May 2019
- 22
- 15
Iain_B
Members
- 25 Mar 2013
- 1,911
- 297
Igor, do you guys have any idea what can fix the problem?
We are really struggling here with the ishtar rom and there's no solution yet...
SISPANAGHS
Members
- 4 Mar 2018
- 99
- 30
hello.update modrian.
works perfect
works perfect
Attachments
Last edited by a moderator:
Iain_B
Members
- 25 Mar 2013
- 1,911
- 297
Success .
It could be that using the update app on the phone and with 'Battery saver' on, the download gets corrupted when the screen goes off - or the 'Resume' may not work properly. I shall download on the computer in the future.
I am now going to have to look at my KWGT widgets because they do not look as though the sizing is fully compatible with OS2. But I like the look and clarity of OS2.
Hi, everyone, i do a clean flash - wipe format that flash again, it seems sloved my issue. I should read the importance first, thanks eu team great work
I'm on Aurora. I was using Hyperceiler and Pengeek. However, Hyperceiler doesnt fully support Android 15 and Pengeek doesnt seem to support at all.
Does any one have any suggestions for alternative modules that work well with HyperOS 2?
There's only a few options I was using: Add seconds to clock in status bar, Remove privacy dot, add battery bar to top of status bar
Does any one have any suggestions for alternative modules that work well with HyperOS 2?
There's only a few options I was using: Add seconds to clock in status bar, Remove privacy dot, add battery bar to top of status bar
After 4 days, it works great on peridot, battery is good, thanks to dev
- 6 Oct 2016
- 10,349
- 322
How could we have an idea when none of you provided any log of any issue thus far?
desire1504
Members
- 22 Oct 2020
- 140
- 40
Hi everyone!
My Xiaomi 13 Ultra reboot after updating.
Phone is working 5/10mn and reboot.
Opening some applications, and turn off itself or reboot!
Is there someone having same problem?
Thank a lot for your precious help
My Xiaomi 13 Ultra reboot after updating.
Phone is working 5/10mn and reboot.
Opening some applications, and turn off itself or reboot!
Is there someone having same problem?
Thank a lot for your precious help
ErdincFE
Members
- 22 Dec 2024
- 4
- 5
Hello, many mi 13 ultra (ishtar) owners have had problems. I do every eu rom installation as follows, I did not encounter any errors or problems.
I have never installed a rom on this device via twrp yet. In fastboot mode "install_and_format_data" I do a clean installation with the option. When the phone boots up in a healthy way, I put it back in fastboot mode and install the appropriate twrp (https://sourceforge.net/projects/recovery-for-xiaomi-devices/files/ishtar/). From the Wipe section, select "swipe to foctory reset". After that, the device started in a healthy way and I did not have any problems.
The only problem I've seen so far is that changes made in ai eraser pro mode are not saved. I hope it will be useful.
In the initial setup, there were stutters in the interface. Give the rum some time to set. You'll have a much more streamlined interface.
Thank you very much to the Eu team.
I have never installed a rom on this device via twrp yet. In fastboot mode "install_and_format_data" I do a clean installation with the option. When the phone boots up in a healthy way, I put it back in fastboot mode and install the appropriate twrp (https://sourceforge.net/projects/recovery-for-xiaomi-devices/files/ishtar/). From the Wipe section, select "swipe to foctory reset". After that, the device started in a healthy way and I did not have any problems.
The only problem I've seen so far is that changes made in ai eraser pro mode are not saved. I hope it will be useful.
In the initial setup, there were stutters in the interface. Give the rum some time to set. You'll have a much more streamlined interface.
Thank you very much to the Eu team.
Last edited:
my updater under my device-> tap on the hyperos logo is gone.
otherwise on mondrian the update works fine.
my approach:
- boot into twrp a14
- update/install hyperos 2.0
- dalvik delete
- install twrp a15
- clear cache and dalvik
- reboot system
- restart into twrp a15
- install magisk
otherwise on mondrian the update works fine.
my approach:
- boot into twrp a14
- update/install hyperos 2.0
- dalvik delete
- install twrp a15
- clear cache and dalvik
- reboot system
- restart into twrp a15
- install magisk
niebla
Members
- 2 May 2024
- 22
- 15
Same as me, IA eraser does not save changes.
As now my ishtar after some time seems to be stable, hope for someone who has the random reboot, check the battery remaining time as happened to me, that now show the proper time after charging.
Does anyone know where the 'Polaris' app is? I can't find it on my phone, and I can't clear its data. It keeps showing an error. THANK YOU
Xiaomi 13 Ultra / Ishtar
Update works great, smooth, and battery life seems great too. Smooth upgrade. I updated twrp to A15 version before updating hyperos.
- The IR remote app seems to crash when I load it from the notification control panel.
- No HyperOS Ai features (perhaps not available on 13 ultra)
- New icon layout took some time to get used to, but I ended up liking it.
Update works great, smooth, and battery life seems great too. Smooth upgrade. I updated twrp to A15 version before updating hyperos.
- The IR remote app seems to crash when I load it from the notification control panel.
- No HyperOS Ai features (perhaps not available on 13 ultra)
- New icon layout took some time to get used to, but I ended up liking it.
Xiaomi 13 Ultra / Ishtar
Updated via Fastboot. All working great with no problems.
Updated via Fastboot. All working great with no problems.
MaD_mAnIaC
Members
- 2 Jun 2024
- 5
- 15
log
i provided a log a couple posts above, here it is again. the log was running from boot until the phone rebooted by itself... Thanks!
PervizMikail
Members
- 18 Nov 2023
- 381
- 67
Settings > Applications > Manage applications > Show all applications (under the 3 dots).
Hello everyone!
I noticed that with all downloaded themes, some apps are not applied with the themes. For example, with the iOS 18 theme, the dialer, the settings and the opened folder in the launcher are not applied correctly with the theme. Is there already a fix for the compatibility of MIUI 14 with HyperOS 2.0 so that the themes are installed and displayed correctly again?
Many thanks in advance!
I noticed that with all downloaded themes, some apps are not applied with the themes. For example, with the iOS 18 theme, the dialer, the settings and the opened folder in the launcher are not applied correctly with the theme. Is there already a fix for the compatibility of MIUI 14 with HyperOS 2.0 so that the themes are installed and displayed correctly again?
Many thanks in advance!
Is it to update my mondrian from global version hyperOS 1.0.13 to EU/china version 2.0.3? Or is it better to clean it up because of the big version change?
- 6 Oct 2016
- 10,349
- 322
