MIUI 10 MIUI 10 STABLE RELEASE


Status
Not open for further replies.
kolegergo said:
I dont have ext sd card (MI8 SE) but I tried it, dont work :(
Click to expand...
imag1.jpg


I thought so, the files on <root>/sdcard/iGO_Pal (e.g.) where the sys.cfg /content /license direrectorys not a phisycal ExtSD. I have Mi Mix 2S only internal storage. When I flashing a new or back to older rom this procedure helped me.
 
Last edited:
  • Like
Reactions: kolegergo
robertb_45 said:
Hi! Have someone tried already the 10.2.2.0 stable for mi 5X which is Oreo ?? Anyone? :)
Click to expand...

I tried to install it, but I get an error (something like: This update is only for Tiffany devices and your device is ""). I don't know if is problem of my phone (now I have MIUI 10.1.3 with Android 7, or is a problem of the update file).
 
Just installed new update for mi 6x and root with magisk
It's work fine so far but there is two bug
1. gbord haptic feedback back to default after restart
2. If I turn off Bluetooth and I want to turn it on again, i need to restat the phone
 
DaniAnd said:
I tried to install it, but I get an error (something like: This update is only for Tiffany devices and your device is ""). I don't know if is problem of my phone (now I have MIUI 10.1.3 with Android 7, or is a problem of the update file).
Click to expand...
Try to update TWRP, use 3.2.3 treble, search for it here in the subforum of Mi5X
 
Hello,

I want to change the rom i have in my Redmi 4 prime/pro/prada.
Right now it has the latest version of miui 10 beta.
But i have found a bug which the previous version hadnt.
Now i cant change the volume of my blueetooth earphones through the phone, only through the earphones.

I would like to install the stable one to see if it corrects the problem or even roll back.
To roll back i know i only need to clear cache/dalvik.
But to install this stable.
I have to perform a clean installation?
 
I am getting random error linked to quickapss

Mi8 SE stable 10.2

java.lang.IllegalStateException: J2V8 native library not loaded
at com.eclipsesource.v8.V8.checkNativeLibraryLoaded(SourceFile:253)
at com.eclipsesource.v8.V8.createV8Runtime(SourceFile:153)
at com.eclipsesource.v8.V8.createV8Runtime(SourceFile:114)
at org.hapjs.render.jsruntime.b.<init>(SourceFile:33)
at org.hapjs.render.jsruntime.JsThread.a(SourceFile:321)
at org.hapjs.render.jsruntime.JsThread.c(SourceFile:61)
at org.hapjs.render.jsruntime.JsThread$a.handleMessage(SourceFile:186)
at android.os.Handler.dispatchMessage(Unknown Source:21)
at android.os.Looper.loop(Unknown Source:155)
at android.os.HandlerThread.run(Unknown Source:28)
Caused by: java.lang.UnsatisfiedLinkError: dalvik.system.PathClassLoader[DexPathList[[zip file "/system/app/HybridPlatform/HybridPlatform.apk"],nativeLibraryDirectories=[/system/app/HybridPlatform/lib/arm64, /system/lib64, /vendor/lib64, /system/lib64, /vendor/lib64]]] couldn't find "libj2v8.so"
at java.lang.Runtime.loadLibrary0(Runtime.java:1011)
at java.lang.System.loadLibrary(System.java:1657)
at com.eclipsesource.v8.LibraryLoader.loadLibrary(SourceFile:43)
at com.eclipsesource.v8.V8.load(SourceFile:75)
at com.eclipsesource.v8.V8.createV8Runtime(SourceFile:149)
... 8 more
 
robertb_45 said:
Try to update TWRP, use 3.2.3 treble, search for it here in the subforum of Mi5X
Click to expand...

Hi! I installed the new TWRP version, it works fine. I tried to install the update (it works, I received the "OK", but now the phone is unusable (black screen in all cases, including when I try to access TWRP to back to a previous backup), and did not works the charging... Tomorrow I will try something to try to revive the phone.
 
DaniAnd said:
Hi! I installed the new TWRP version, it works fine. I tried to install the update (it works, I received the "OK", but now the phone is unusable (black screen in all cases, including when I try to access TWRP to back to a previous backup), and did not works the charging... Tomorrow I will try something to try to revive the phone.
Click to expand...
I had this problem, what I did for solve it it was to install official beta China rom trough fastboot (without locking bootloader obviously) and install that TWRP and try again it worked for me
 
robertb_45 said:
I had this problem, what I did for solve it it was to install official beta China rom trough fastboot (without locking bootloader obviously) and install that TWRP and try again it worked for me
Click to expand...

Thank you! I will try to do this tomorrow at office (now I'm at home and here I only have a Mac).

Thank you!
 
Last edited:
  • Like
Reactions: skejpa and robertb_45
What is the difference beetween MIUI 10.0/10.1/10.2 I haven't understand this versions. Regards
 
Igor Eisberg said:
Build a 64-bit ROM out what? Thin air? We don't have source codes for any base ROMs, so we can't recompile the target architecture.
32-bit ROM is all you're going to get, thanks to Xiaomi.
People should really do some homework before buying low-end devices.
Click to expand...

Ok, thank you for your answer.
 
Hello everyone!
Can anyone check if wallpaper carousel work properly? I'm currently on the globe rom and it doesnt work as it should. It switches only the homescreen wallpaper and it doesnt even switch it every time i unlock the device.

Can anyone check it if it works on the EU rom with the POCO F1?

Thank you!
 
Hello,

I have a question, can you help me? @ingbrzy ; @Igor Eisberg
In this moment i have MIUI 10.3 / 9.1.3 xiaomi.eu beta.
The update came with a bug. When i try to use the volume buttons of my smartphone to control the music or sounds on my blueetooth earphones, just doesnt happen, i changed the settings, rebooted the device, wiped cache and dalvik again... and the same problem.
In the previous build it works without any problem.

But now, after reading the messages above, i would like to upgrade to stable 10.2 already released.
To upgrade it, i have to wipe data, cache and dalvik only?
Cause i have read and some people say to wipe system and im not sure if that is correct.
Since if we delete the system, it will erase TWP too if im not mistaken.
Can you confirm if im right or wrong, please?
 
lDemonPtl said:
Hello,

I have a question, can you help me? @ingbrzy ; @Igor Eisberg
In this moment i have MIUI 10.3 / 9.1.3 xiaomi.eu beta.
The update came with a bug. When i try to use the volume buttons of my smartphone to control the music or sounds on my blueetooth earphones, just doesnt happen, i changed the settings, rebooted the device, wiped cache and dalvik again... and the same problem.
In the previous build it works without any problem.

But now, after reading the messages above, i would like to upgrade to stable 10.2 already released.
To upgrade it, i have to wipe data, cache and dalvik only?
Cause i have read and some people say to wipe system and im not sure if that is correct.
Since if we delete the system, it will erase TWP too if im not mistaken.
Can you confirm if im right or wrong, please?
Click to expand...
I update it without wipe cache and dalvik. Works fine.
 
  • Like
Reactions: lDemonPtl
Have anyone try HM6Pro with Gmobile network? Is it can call from Gmobile sim card?
Thanks all. I am asking before install this awesome rom. Please share your exp with Gmobile network. I tried both china and indian rom but wont work
 
Status
Not open for further replies.

Similar threads

ingbrzy
  • Sticky
HyperOS 2.0 HyperOS 2.0 STABLE RELEASE
Replies
753
Views
349K
HyperOS
Pakino2004
Pakino2004
ingbrzy
  • Locked
HyperOS 1.0 24.7.28 (Final)
Replies
292
Views
333K
HyperOS
Igor Eisberg
Igor Eisberg
ingbrzy
  • Locked
HyperOS 1.0 24.7.22/25/26
Replies
51
Views
44K
HyperOS
Ahaba
A
ingbrzy
  • Locked
HyperOS 1.0 24.7.1
Replies
54
Views
44K
HyperOS
Mistery88
M
ingbrzy
  • Locked
HyperOS 1.0 24.7.15/17
Replies
87
Views
53K
HyperOS
KGVER
KGVER
Top Bottom
Back