MIUI 11 MIUI 11.0 STABLE RELEASE

[Alan098765]

Hello,
Besides the part of flashing firmware, I formatted data. Then I wiped caches/data/system.. That is the factory reset right? Then booted the rom, same problems persist.. Am I doing something wrong? Can it not be the rom? No camera recording and sensors still not working...
Greetings

You have to REBOOT TO RECOVERY after format data,then factory reset. its best on some older phones not to wipe system, you could have messed up persist.img in system. just try my suggested way, try latest twrp for your device

Sent from my MI CC 9 using Tapatalk

 

[ddj123]

You have to REBOOT TO RECOVERY after format data,then factory reset. its best on some older phones not to wipe system, you could have messed up persist.img in system. just try my suggested way, try latest twrp for your device

Sent from my MI CC 9 using Tapatalk

I followed your instructions. But still have the same problems. No proximity sensor. No accelerometer. (No sensors..)
No camera recording..

There is a guy (lavender)in this same forum with also proximity etc problems.. can't it be a Rom issue? (Lavender miui 11 Q stable)
Other solutions?
Maybe only this lavender rom issue..

Thanks!

 

[YeepYeep]

I followed your instructions. But still have the same problems. No proximity sensor. No accelerometer. (No sensors..)
No camera recording..

There is a guy in this same forum with also proximity etc problems.. can't it be a Rom issue? (Lavender miui 11 Q stable)
Other solutions?
Maybe only this lavender rom issue..

Thanks!

Frequently Asked Questions:
Q: Camera and/or sensors are not working!
A: You wiped "Persist" partition using an unofficial TWRP build. You shouldn't have done that.
You'll now have to flash the latest official fastboot ROM for your device to restore this partition.

 

[ddj123]

Frequently Asked Questions:
Q: Camera and/or sensors are not working!
A: You wiped "Persist" partition using an unofficial TWRP build. You shouldn't have done that.
You'll now have to flash the latest official fastboot ROM for your device to restore this partition.

Hi, how can I wiped the persist partition away? I only formatted data, clean wipe and clean install the Rom.. I never had problems until this rom..

But if yes, how can I flash the latest fastboot rom without a pc? And which fastboot rom should I use? (How?)

Thanks

Ps: I only ever used orangefox, nothing unofficial..like twrp
Must it not be something else that causes the problems?

Camera works fine, only not recording, wifi/Bluetooth work too(=persist fail not work..) must be something else than that..?

 

[YeepYeep]

I don't know. Never have done that.
But without a PC i think it is impossible.

 

[ddj123]

Frequently Asked Questions:
Q: Camera and/or sensors are not working!
A: You wiped "Persist" partition using an unofficial TWRP build. You shouldn't have done that.
You'll now have to flash the latest official fastboot ROM for your device to restore this partition.

I had no sensors, no camera video etc.. with miui eu Q 11 stable Lavender. Tried everything. People even suggested to flash a new stock rom to reset persistance img etc..

But then I flashed an older stable Rom:

(Myfavorite: xiaomi.eu_multi_HMNote7_V11.0.4.0.PFGCNXM11-9)

And EVERYTHING WORKS AGAIN!! Sensors, camera etc..

MUST BE A -LAVENDER Rom- MIUI 11 EU Q STABLE ISSUE... 100% SURE...

Hope ingbrzy fixes it soon in new update, I love this rom. Sure will make a nice donation!

Thanks

 

[tino leonardi]

I use this stable version on Mi 6 and Mi doc viewer not work at all. Anyone can help?

 

[german_psycho]

RN8T:

I tried to install the latest ROM (dated: 02. June) over the previous MIUI11 ROM from Xiaomi.eu (think it was from March).
Did install it over the previous one via TWRP, wiped Cache/Dalvik - and it ends in not booting.
Bootloader comes up, tries to boot the ROM, but resets and sends me straight into TWRP again.

What did I do wrong?

No one any idea for me why it didn't work?

 

[Stoffl]

Because you didn't clean flash?

 

[tarkan37]

Comon MIUI12 where are you !!!

 

[german_psycho]

Because you didn't clean flash?

Yeah, but that wasn't a problem on any other Xiaomi device I had. Always dirty flashed new versions unless the base Android or MIUI changed.
Would be nice to avoid setting up the phone again..

 

[ouais]

Lavender here ( redmi note 7)
Clean flash from the last android p release To the new one, clean flash (format data, wipes...)
Everything ok

 

[ouais]

And orange fox recovery

 

[ddj123]

And orange fox recovery

All sensors and video in camera working?

 

[tino leonardi]

I use this stable version on Mi 6 and Mi doc viewer not work at all. Anyone can help?

Problem solved by install mi doc viewer. Now I have another problem, I want to know why Get Apps (i installed it) disppear from Home screen. How to bring it back? It is not deleted, I still can see the app in "manage apps".

Thanks!

 

[ouais]

All sensors and video in camera working?

Yes enverything works

 

[RScatch]

Is it possible to get around this restriction? I can't update any system apk from any source except Google play. But this is weird because even on global rom it is allowed.

 

[LOLO9393]

Is it possible to get around this restriction? I can't update any system apk from any source except Google play. But this is weird because even on global rom it is allowed.

Don't ask!
EU rom is locked in order to avoid you to update system apk that will mess up the rom.
update will come in due time with weekly release.

 

[robertb_45]

Is it possible to get around this restriction? I can't update any system apk from any source except Google play. But this is weird because even on global rom it is allowed.

You could try to change the .apk with root access and a root file manager, but it can break the system

 

[ddj123]

A weird mystery!

With miui eu 11 Android 9 stable everything works fine. But when I go to miui eu 11 Q stable or miui 12 Q, no sensors! No video camera!

Go back to miui Android 9, everything works!

Got the suggestion in forum to repair persist by fastbooting miui Android 9 rom. Did that.

Still no sensors/video camera in miui eu 11 Q!

What am I doing wrong? It's a bit of a mystery for me.

Derpfest rom Android 10 everything fine!

Lavender

Thanks

 

[VultureXT]

Hi I have a weird problem. My Mi6 is on MIUI12 beta. And ny Mi8 is running MIUI11 stable. But if i use my Mi6 as hotspot, my Mi8 will said connected but no internet. Same thing happened if i switch the device role. Only happen after i flashed my Mi8 with MIUI.EU rom. Other device such as car radio and other phone can use hotspot from either my Mi6 ir Mi8 running on MIUI.EU rom. Any ideas how to fix? Thanks.

Sent from my MI 6 using Tapatalk

 

[deedend]

Hi all,

I have a MI9SE with xiaomi.eu weekly MIUI 11 20.3.19, can I install the latest MIUI 11 stable (from May) without wipe? Anyone have tried?

Thanks

 

[superpulosu]

Hi all,

I have a MI9SE with xiaomi.eu weekly MIUI 11 20.3.19, can I install the latest MIUI 11 stable (from May) without wipe? Anyone have tried?

Thanks

No, its a downgrade. You have to format data.

 

[ddj123]

No sensors and video camera in android 10 miui.eu stable..

Thought the rom was bad, but my persist needed to be reset..

Typed in a linux terminal program like termux: chcon -R ubjectr:sensorspersist_file:s0 /mnt/vendor/persist/sensors. (Type first:su for super user..) did that after I was back to miui.eu 11 stable pie. Worked only in pie.

Then I formatted data and did factory reset. Installed for testing a new lineage rom, nikgapps, and magisk.

Then format data and back to miui.eu 11 Q stable:

EVERYTHING WORKED! I do not know what I exactly did right, but this did the trick..

Excuse me developer I said problems it was rom related. No, YOUR
ROM

IS

EXCELLENT!!!
Awesome!!!

 

[xiaokai]

I tired to update from 11.08. I got the new mi.com boot logo twice them it would just go into twrp. And wouldn't start the OS