[ROM | 4.4.4][ | WIUI 6 | ][ 4.10.10 FiNAL ] - MULTiLanguage | AROMA |


Marqc said:
Sorry but I don't understand what you mean...
Click to expand...

Enter "Settings", then go to "Buttons". There you can change the buttons' functions. First menu is for "Menu" button (the left capacitive button). If you change it to "show menu", then menu button will work as menu button. The other menus are as it was in previous release.
 
sorry guys is it normal when i'm in any part of the software if i put my hand on the top left (just in front of the display) it turns off? Why? It's seems that the proximity sensor is not good, it's like when i call someone and the display becomes black...
Is that normal? I don't want this, i don't like the display becomes black when my hand is on the upper part of the phone..
 
annihilator said:
sorry guys is it normal when i'm in any part of the software if i put my hand on the top left (just in front of the display) it turns off? Why? It's seems that the proximity sensor is not good, it's like when i call someone and the display becomes black...
Is that normal? I don't want this, i don't like the display becomes black when my hand is on the upper part of the phone..
Click to expand...
Try change build.prop options.
 
annihilator said:
sorry guys is it normal when i'm in any part of the software if i put my hand on the top left (just in front of the display) it turns off? Why? It's seems that the proximity sensor is not good, it's like when i call someone and the display becomes black...
Is that normal? I don't want this, i don't like the display becomes black when my hand is on the upper part of the phone..
Click to expand...

It is normal that proximity sensor turns off display when it meets an obstacle on itself (like your ear, head or finger) in call.
But if it was not in call, then it is also possible. It happened to me once when I tried to end a call badly. Then the system was confused whether call is continuing or not. And when I got my finger on proximity, it turned off the screen. But I was able to solve it by trying to call a number (I called my own office to not confuse anybody) and then ended the call normally with end call button. It fixed the problem.
 
But is someone facing the problem ? It's not hardware in v5 is perfect. When I put hand in front he says not to put hand there so it seems software knows that si it's software related
 
Elbay Malik said:
It is normal that proximity sensor turns off display when it meets an obstacle on itself (like your ear, head or finger) in call.
But if it was not in call, then it is also possible. It happened to me once when I tried to end a call badly. Then the system was confused whether call is continuing or not. And when I got my finger on proximity, it turned off the screen. But I was able to solve it by trying to call a number (I called my own office to not confuse anybody) and then ended the call normally with end call button. It fixed the problem.
Click to expand...


Got it it seemed that was the problem.
You're the best !!!!
 
  • Like
Reactions: Elbay Malik
annihilator said:
But is someone facing the problem ? It's not hardware in v5 is perfect. When I put hand in front he says not to put hand there so it seems software knows that si it's software related
Click to expand...
I had that problem... And solved with a new call.

Now I have a big problem, volume in call memorizes low level.
To raise up volume I must firstly reduce volume and than raise up again!!!
It's boring!



Sent from Xiaomi Mi-6w ( the "w" is for winter not for wonder)...with tapatalk 26°
 
Elbay Malik said:
Enter "Settings", then go to "Buttons". There you can change the buttons' functions. First menu is for "Menu" button (the left capacitive button). If you change it to "show menu", then menu button will work as menu button. The other menus are as it was in previous release.
Click to expand...
The question unfortunately stays unanswered: where is the 2g/3g toggle switch?
 
  • Like
Reactions: grouss92
I did a completely fresh install of 4.9.29 and yesterday updated to 4.10.10 without wiping data.
Here is my bug report:

1 - In-Call Volume is extremely low. Did 20 calls to 20 different persons with 20 different phones - Problem is NOT on the other side! ( CWM Restore to 4.9.29 fixed it )

2 - 80 % of calls doesnt get closed correctly which leads to a proximity-sensor bug ( everytime you place your hand over the sensor while normal usage the screen becomes black !) ( CWM Restore to 4.9.29 fixed it )

3 - Bluetooth engaged calls are not working ( CWM Restore to 4.9.29 fixed it )


Feature List of 4.10.10 is great but not usable with that bugs. Hope for fixes or answers.
 
  • Like
Reactions: cbpbxecmecmbeh
xeGox said:
I had that problem... And solved with a new call.

Now I have a big problem, volume in call memorizes low level.
To raise up volume I must firstly reduce volume and than raise up again!!!
It's boring!



Sent from Xiaomi Mi-6w ( the "w" is for winter not for wonder)...with tapatalk 26°
Click to expand...

What volume are you implying? Can you tell it step by step? From what I understand, when you call somebody, it is loud, and you lower the volume. And when you call someone else, the volume stays low. It is actually a good function, enabling you to adjust your call volume as you require.
 
You must log in or register to reply here.

Similar threads

ingbrzy
  • Locked
HyperOS 1.0 24.7.28 (Final)
Replies
292
Views
280K
HyperOS
Igor Eisberg
Igor Eisberg
ingbrzy
  • Locked
MIUI 14 23.10.15 (Final)
Replies
103
Views
191K
MIUI 14
hellfreezover
H
ingbrzy
  • Locked
MIUI 13 22.10.26 (Final)
Replies
267
Views
317K
MIUI 13
Kozuso
K
ingbrzy
  • Locked
MIUI 13 22.1.5/6
Replies
478
Views
453K
MIUI 13
Blade_
Blade_
archesolus
Arnova Google-Camera Mod 8.1 [STABLE]
Replies
17
Views
13K
Redmi Note 7 / Pro
archesolus
archesolus
Top Bottom
Back