Even if sometimes fails it would be nice to have this functionality but on 1080p or with an option to control the output mode. I will rarely use this so I don't care to restart (to stock) when needed.
BTW, great work M1cha!
[ROM][KK][4.4][2014-05-18] CyanogenMod 11.0
- Thread starter M1cha
- Start date
Even if sometimes fails it would be nice to have this functionality but on 1080p or with an option to control the output mode. I will rarely use this so I don't care to restart (to stock) when needed.
BTW, great work M1cha!
- 29 May 2011
- 1,747
- 297
For me it works with 1080p. You may enable ssh or adb-over-network and check the nodes under "/sys/class/graphics/fb1/".
I hope you have some linux knowledge
- 29 May 2011
- 1,747
- 297
We talked a lot about lags in the last few weeks. As you may already know I've fixed this and everything works fine now - well except for me
It seems that during kernel development - especially during the experiments to fix the lcd driver I somehow damaged my lcd.
The final proof was that via MHL everything is perfectly smooth.
don't worry, a lagging lcd won't keep me from developing but this totally sucks during daily usage -_-
thx @linuxx for testing
It seems that during kernel development - especially during the experiments to fix the lcd driver I somehow damaged my lcd.
The final proof was that via MHL everything is perfectly smooth.
don't worry, a lagging lcd won't keep me from developing but this totally sucks during daily usage -_-
thx @linuxx for testing
For me it works with 1080p. You may enable ssh or adb-over-network and check the nodes under "/sys/class/graphics/fb1/".
I hope you have some linux knowledge
My knowledge with linux is average to advanced but I never touched phone / android development. I got there where you point me but now what ?
Sorry. I was trying to echoing some parameters but got nowhere. Here is some output:
Code:
root@aries:/sys/class/graphics/fb1 # more video_mode_str
640x480 p60 4/3
root@aries:/sys/class/graphics/fb1 # more modes
U:640x480p-0
U:720x576p-0
U:1920x1080p-0- 29 May 2011
- 1,747
- 297
In theory you should be able to set the mode(there are multipe files for this)My knowledge with linux is average to advanced but I never touched phone / android development. I got there where you point me but now what ?
Code:root@aries:/sys/class/graphics/fb1 # more video_mode_str 640x480 p60 4/3 root@aries:/sys/class/graphics/fb1 # more modes U:640x480p-0 U:720x576p-0 U:1920x1080p-0
Sounds like you need a beerWe talked a lot about lags in the last few weeks. As you may already know I've fixed this and everything works fine now - well except for me
It seems that during kernel development - especially during the experiments to fix the lcd driver I somehow damaged my lcd.
The final proof was that via MHL everything is perfectly smooth.
don't worry, a lagging lcd won't keep me from developing but this totally sucks during daily usage -_-
thx @linuxx for testing
Gesendet von meinem MI 2 mit Tapatalk
Yes, now I am doing some tests with HDMI to VGA (which is capable of more than 640x480) switch in MHL ... and got this in kernel log when plugged in:
Maybe someone else see what I am blind for
(I need a beer too )
Code:
<6>[ 7789.751312] handle_usb_insertion_removal: notify usb plugin 1
<4>[ 7789.754699] QBMS Reported SOC = 100
<4>[ 7789.761138] QBMS Reported SOC = 100
<4>[ 7789.778991] QBMS Reported SOC = 100
<4>[ 7789.963378] [MHL]App: Peer's POW bit is cleared. Turn the VBUS power ON here.
<6>[ 7789.963561] mhl_vbus_power: on 1
<3>[ 7790.231445] msm_otg msm_otg: Failed notifying 0 charger type to PMIC
<3>[ 7790.231628] msm_otg msm_otg: Failed notifying 0 charger type to PMIC
<6>[ 7790.231780] msm_otg msm_otg: phy_reset: success
<6>[ 7790.343963] msm_otg msm_otg: USB in low power mode
<6>[ 7790.363433] Starting timer to fire in T_SRC_RXSENSE_CHK 250ms (749032)
<7>[ 7790.909362] EXT_COMMON: EDID[00-0f] 00 ff ff ff ff ff ff 00 05 e3 50 24 3d 0f 00 00
<7>[ 7790.909393] EXT_COMMON: EDID[10-1f] 20 15 01 03 80 34 1d 78 2a ee d1 a5 55 48 9b 26
<7>[ 7790.909393] EXT_COMMON: EDID[20-2f] 12 50 54 bf ef 00 d1 c0 b3 00 95 00 81 80 81 40
<7>[ 7790.909423] EXT_COMMON: EDID[30-3f] 81 c0 01 01 81 c0 02 3a 80 18 71 38 2d 40 58 2c
<7>[ 7790.909423] EXT_COMMON: EDID[40-4f] 45 00 09 25 21 00 00 1e 00 00 00 fd 00 32 4c 1e
<7>[ 7790.909454] EXT_COMMON: EDID[50-5f] 53 11 00 0a 20 20 20 20 20 20 00 00 00 fc 00 32
<7>[ 7790.909454] EXT_COMMON: EDID[60-6f] 34 35 30 57 0a 20 20 20 20 20 20 20 00 00 00 ff
<7>[ 7790.909484] EXT_COMMON: EDID[70-7f] 00 43 56 45 42 38 48 41 30 30 33 39 30 31 00 71
<7>[ 7790.909484] EXT_COMMON: [JSR] (hdmi_common_read_edid): No. of CEA blocks is [0]
<7>[ 7790.909515] EXT_COMMON: HDMI DVI mode: yes
<6>[ 7790.909515] hdmi_msm hdmi_msm.1: EDID (V=1.3, #CEABlocks=0[V0], ID=AOC, IEEE=0000, EDID-Ext=0x00)
<7>[ 7790.909637] EXT_COMMON: Interlaced mode byte data_buf[0x11]=[1e]
<7>[ 7790.909637] EXT_COMMON: hdmi_edid_detail_desc: A[1920x1080] B[280x45] V[521x293] p
<7>[ 7790.909667] EXT_COMMON: hdmi_edid_detail_desc: mode found:16
<7>[ 7790.909667] EXT_COMMON: [hdmi_edid_get_display_mode:1712] Block-0 Adding vid fmt = [1920x1080 p60 16/9]
<7>[ 7790.909698] EXT_COMMON: EDID: format: 16 [1920x1080 p60 16/9], Supported
<4>[ 7790.909698] mhl_is_connected: 1
<7>[ 7790.909881] EXT_COMMON: EDID: format: 16 [1920x1080 p60 16/9], Not-Supported by MHL
<7>[ 7790.909881] EXT_COMMON: EDID: format: 133 [1280x1042 p60 5/4], Supported
<4>[ 7790.909881] mhl_is_connected: 1
<7>[ 7790.909973] EXT_COMMON: EDID: format: 133 [1280x1042 p60 5/4], Not-Supported by MHL
<7>[ 7790.910003] EXT_COMMON: EDID: format: 1 [640x480 p60 4/3], Supported
<4>[ 7790.910003] mhl_is_connected: 1
<7>[ 7790.910095] EXT_COMMON: EDID: format: 1 [640x480 p60 4/3], Supported by MHL
<7>[ 7790.910125] EXT_COMMON: add_supported_video_format: Default resolution 1 [640x480 p60 4/3] supported
<4>[ 7790.910125] hdmi_edid_didn't extract_VIDEO_CAPABILITY_D_BLOCK; set to Full range
<3>[ 7790.910369] Video format is : 1
<6>[ 7790.910552] hdmi_msm hdmi_msm.1: HDMI Core: Initialized
<6>[ 7790.910736] hdmi_msm hdmi_msm.1: HDMI HPD: CONNECTED: send ONLINE
<6>[ 7790.910980] hdmi_msm hdmi_msm.1: HDMI HPD: sense : send HDCP_PASS
<6>[ 7790.911315] hdmi_msm hdmi_msm.1: mhl_connect_api: hdmi state switched to 1
<7>[ 7790.920562] EXT_COMMON: hdmi_common_rda_edid_scan_info: '0, 0, 0
<7>[ 7790.920593] '
<7>[ 7790.921295] EXT_COMMON: hdmi_common_rda_edid_modes: '1'
<6>[ 7790.921386] mdp4_dtv_start: <ID=1 640x480 (16,96,48), (10,2,33) 25MHz>
<6>[ 7790.925933] dtv_on: tv_src_clk=25200kHz, pm_qos_rate=58000kHz, [0]
<7>[ 7790.926483] EXT_COMMON: reserved format is 1
<7>[ 7790.926483] EXT_COMMON: resolution 640x480 p60 4/3
<6>[ 7790.926513] hdmi_msm hdmi_msm.1: HDMI cable connected hdmi_msm_power_on(640x480, 25200000)
<3>[ 7790.926574] Video format is : 1
<6>[ 7790.926574] hdmi_msm hdmi_msm.1: HDMI Core: Initialized
<6>[ 7790.926605] hdmi_msm hdmi_msm.1: power=ON DVI= ON
<6>[ 7790.926605] mdp4_dtv_on:
<4>[ 7791.141021] [MHL]App: Peer's POW bit is set. Turn the VBUS power OFF here.
<6>[ 7791.141113] mhl_vbus_power: on 0
<6>[ 7791.211730] mhl_interrupt
<6>[ 7791.591735] mhl_interrupt
<6>[ 7792.608825] lm3530-led 0-0038: set brightness 8
<6>[ 7792.673614] lm3530-led 0-0038: set brightness 9
paulrlz
Members
- 23 Nov 2013
- 584
- 82
I will change my lcd with a new one in few days . I will send the old one to m1cha gratis (maybe he can pay half shipment xD) . It haves only some light bleed in the down and in the middle that I HATE!Sounds like you need a beer
Gesendet von meinem MI 2 mit Tapatalk
Inviato dal mio MI 2 utilizzando Tapatalk
- 29 May 2011
- 1,747
- 297
linuxx
Members
- 6 Jul 2013
- 1,436
- 222
At least you can take the defy oneWe talked a lot about lags in the last few weeks. As you may already know I've fixed this and everything works fine now - well except for me
It seems that during kernel development - especially during the experiments to fix the lcd driver I somehow damaged my lcd.
The final proof was that via MHL everything is perfectly smooth.
don't worry, a lagging lcd won't keep me from developing but this totally sucks during daily usage -_-
thx @linuxx for testing
paulrlz
Members
- 23 Nov 2013
- 584
- 82
gonewild
Members
- 16 Apr 2013
- 300
- 52
paulrlz
Members
- 23 Nov 2013
- 584
- 82
Give he a brand new screen!a beer or a screen? it depends for my donation
Inviato dal mio MI 2 utilizzando Tapatalk
linuxx
Members
- 6 Jul 2013
- 1,436
- 222
Seriously. It's a fake. He only wants your money xDGive he a brand new screen!
Inviato dal mio MI 2 utilizzando Tapatalk
BTW I suggest to update cwm now
Inviato dal mio MI 2 utilizzando Tapatalk
gonewild
Members
- 16 Apr 2013
- 300
- 52
backup and tomorrow for me...Seriously. It's a fake. He only wants your money xD
BTW I suggest to update cwm now
Inviato dal mio MI 2 utilizzando Tapatalk
BTW 0,10 cents less for the screen
I'm having a problem with the internal SD storage (sdcard0). In Windows when I try to write to it the transfer freezes and after a few minutes crashes. When I open the android file manager and try to make a file or folder it says it needs elevated permissions and I should try with root access.
Any idea how I can fix this?
Thanks!
Edit:
I booted into system2 (MIUI) and it must have reset the correct permissions - thanks!
Any idea how I can fix this?
Thanks!
Edit:
I booted into system2 (MIUI) and it must have reset the correct permissions - thanks!
Last edited:
Hey! How do i restore this phone to factory reset? Currently using this rom..sorry for not searching, something doesnt work for me here
linuxx
Members
- 6 Jul 2013
- 1,436
- 222
linuxx
Members
- 6 Jul 2013
- 1,436
- 222
Fastboot packages. There should be a pinned thread about this
Or miflash
Sent from my nexus 7
Of course i found it. Apparently i need to put my lenses in. Thanks. And i'm gonna miss this thread (i'm giving my mi2s away.) I've got an HTC now.
Similar threads
- Poll
