In the first steps of the post it is mentioned:
- Download: HyperOS 1.0.1.0.UNOMIXM
- Extract the .tgz file and pick out the vendor_boot.img and the vbmeta.img. Rename them to hyperos_orig_vendor_boot.img and hyperos_orig_vbmeta.img
Temporary TRPW Recovery and working permanent ROOT for [zircon]
- Thread starter StratOS1
- Start date
- Download: HyperOS 1.0.1.0.UNOMIXM
- Extract the .tgz file and pick out the vendor_boot.img and the vbmeta.img. Rename them to hyperos_orig_vendor_boot.img and hyperos_orig_vbmeta.img
how to flash original hyperos i downloaded both recovery and fastboot rom what are the commands, and
How do i reboot in custom recovery(do you mean twrp) after doing all the steps
Flash via fastboot by downloading fastboot image from link (.tgz file) and extracting it, then simply run flash_all.bat when connected in fastboot mode.
To reboot into recovery, simply hold down power and Up buttons.
Exactly same as above, download fastboot image, extract, then flash_all.bat when in fastboot mode
So i just run that file from folder, or do i need to run it from platform tools folder and then flash it inside cmd
Dude im sorry for stupid questions but i cant really fix this, nothing works. I just want my phone back
For HyperOS is better to patch init_boot with magisk and flash it on fastboot.
No need to install non usable recovery.
No need to install non usable recovery.
This is error i get when using fastboot boot cmd
But not boot.img !
Our device - Devices with Vendor Boot as Recovery (A/B):
To root hyperOS systems it's necessary to patch init_boot to gain root without flashing new recovery !
Patch a original rom init_boot with magisk and flash it.
Flash original boot and vendor_boot also before reboot !
and use the *_ab to flash both slots !
Step1=Download the hyperos firmware which you are currently using
Step2= Extract it
Step3=Open Extracted Folder / Images Folder
Step4=Find init_boot.img and copy it to the internal storage
Step5=Patch the copied init_boot.img in Magisk
Step6=Move the patched init_boot.img to pc and open Platform tool folder (cmd prompt)
Step7=Enable USB Debugging from Developer Option then switch off the device and put the device into fastboot mode(press power +volume down button)
Step8= After pc detect the device , type this command
fastboot flash init_boot_ab magiskpatch.img
Step9=Reboot the device
Step10=Open Magisk (if the required additional setup promp come , click on ok and reboot the device)
Step 8.1 (only for you) : Flash original boot and vendor_boot :
fastboot flash init_boot_ab originalboot.img
fastboot flash vendor_boot_ab originalvendorboot.img
fastboot oem cdms
Our device - Devices with Vendor Boot as Recovery (A/B):
To root hyperOS systems it's necessary to patch init_boot to gain root without flashing new recovery !
Patch a original rom init_boot with magisk and flash it.
Flash original boot and vendor_boot also before reboot !
and use the *_ab to flash both slots !
Step1=Download the hyperos firmware which you are currently using
Step2= Extract it
Step3=Open Extracted Folder / Images Folder
Step4=Find init_boot.img and copy it to the internal storage
Step5=Patch the copied init_boot.img in Magisk
Step6=Move the patched init_boot.img to pc and open Platform tool folder (cmd prompt)
Step7=Enable USB Debugging from Developer Option then switch off the device and put the device into fastboot mode(press power +volume down button)
Step8= After pc detect the device , type this command
fastboot flash init_boot_ab magiskpatch.img
Step9=Reboot the device
Step10=Open Magisk (if the required additional setup promp come , click on ok and reboot the device)
Step 8.1 (only for you) : Flash original boot and vendor_boot :
fastboot flash init_boot_ab originalboot.img
fastboot flash vendor_boot_ab originalvendorboot.img
fastboot oem cdms
Last edited:
Two days of working finnaly managed to do it, thanks all for your time and help.
Any predictions on custom rom, are there some active communities on this topic.
Any predictions on custom rom, are there some active communities on this topic.
Last edited:
There are some, but support is weak.
Custom recovery will be hard to managed.
EROFS for our device RO2RW is still pain in the ass ...
Glad you made it.
Anyone knows if the ( fastboot flash init_boot_ab init_boot.img ) method works on MIUI 14 (I found a matching fastboot rom.) ? Or an update to HyperOS is required?
I’m exploring the process of using Temporary TRWP Recovery for my Android device and am curious about the transition to a permanent ROOT. Can anyone share their experiences or tips on effectively managing this process? Specifically, how do you ensure the stability of your device when shifting from a temporary TRWP Recovery to a permanent ROOT setup? Any advice on best practices, potential pitfalls, or recommended tools would be greatly appreciated. I’m aiming for a balance between functionality and security. Thanks in advance for your insights!
Do I need to unlock bootloader also 1st? If any methods how to unlock bootloader[EDIT] Added od 1.5.2024 only for HyperOS, Root without flashing non usefull recovery !
ROOT For HyperOS :
Step1=Download the hyperos firmware which you are currently using
Step2= Extract the ROM
Step3=Open Extracted Folder / Images Folder
Step4=Find init_boot.img and copy it to the internal storage
Step5=Patch the copied init_boot.img in Magisk
Step6=Move the patched init_boot.img to pc and open Platform tool folder (cmd prompt)
Step7=Enable USB Debugging from Developer Option then switch off the device and put the device into fastboot mode(press power +volume down button)
Step8= After pc detect the device , type this command
fastboot flash init_boot_ab patchedmagiskfile
Step9=Reboot the device
Step10=Open Magisk (if the required additional setup promp come , click on ok and reboot the device)
Root Sucessfully installed
Active magisk "root" is gained by patched init_boot and further on by magisk persist.img ... !
Root can be also obtained by apatch by our device !
[/EDIT]
Greetings.
Since Device Tree for zircon is still not available and MTK Dimensity 7200 Ultra is a pain in the ass,
I'm looking forward for working kernel based recovery, specialy the DEV's if any1 is willing to work on it.
Current RECOVERY for MIUI 13 and MIUI 14 are not fully compatible with the device.
Looking forward for possible feedback about the script and feedback about recovery build.
Thx.
I have made a script to instal temporary recovery based on TRPW 3.7.1_12, gain temp root (sideload magisk) and
gain permanent root with original recovery restored !
Follow exactly the script step by step !
Run self extracting 7zip exe file in directory and Run the Flash.bat.
Tested on [zircon]:
Global EEA MIUI 14.0.7.0.
HyperOS 1.0.1.0.UNOMIXM [After adding correct images for HyperOS] !
72 MB file on MEGA
mega.nz
Since recovery is from CN, you have to change the default language as written on the script :
And the next thing is to gain temp root and permanent root and make the default recovery back.
View attachment 52319 View attachment 52314 View attachment 52315 View attachment 52316 View attachment 52317 View attachment 52318 View attachment 52321
Similar threads
