MIUI 12.3 20.12.9/10


Do you like this MIUI version?


  • Total voters
    336
Status
Not open for further replies.
It doesn't work on mine tried fastbooting it but give black screen only
Works as we know last month ..
You can flash the new twrp 1206 or you can boot to twrp ..
But it's written a thousand times that you have to wait almost a minute until twrp loads , the black screen will be passed and twrp will load if you wait a minute ..

And the error "failed to load authenticate boot.img" , it can be passed easily , just re-enter fastboot mode with buttons , phone must close and re-enter to fastboot to pass the command ..
 
The rom is very good, the only problem is that my MI 9T does not show any wallpaper, only the black screen (the positive part is that it saves battery haha) but I don't know how to solve it
Try disable global dark theme and reboot phone.
 
The rom is very good, the only problem is that my MI 9T does not show any wallpaper, only the black screen (the positive part is that it saves battery haha) but I don't know how to solve it
I think that you have to delete ( wipe ) all data and cache from an application , i think mi launcher ..
 
 img]


try to do a completely clean installation, check ALL boxes, dalvik cache, system, data, internal storage, cache, DELETE EVERYTHING. but to do that you need a usb OTG, put the ZIP ZIP rom the same way you download it, don't unzip the rom, put the rom on the USB stick after deleting everything.
I'll summarize to be CLEAR.
1- wipe write yes
2- wipe, advance wipe, mark all boxes and delete.
3- connect your pendrive + otg with the rom.
4- install, select the rom that is on your pendrive and install.
This is the correct way and it guarantees the best possible system functioning.

An OTG costs 2 dollars, you need to have this.
READ FIRST POST PLEASE , it's almost a year that we must know this thing now ..
DO NOT WIPE SYSTEM , NEVER WIPE SYSTEM IN TWRP ..
 
  • Like
Reactions: m@c|-|oR
I installed the latest rom via TWRP and my K30 5G got stuck on the "MIUI" logo does not want to reboot properly. Can any one help me please?
 
I know that 3.4.2b-0623 works fine for me - it does everything that I want.
To be quite honest, I do not know the difference between the functionality of the two, except the 1206 (the more recent) is more stable to stay in memory. But that makes no difference because you still have to boot into one or the other from Fastboot.
Ask the cat :) - That's how much difference I think it makes.
ì also still on 0623, as long as others still have issues.... i keep using this one
 
  • Like
Reactions: Allessa
holy cow this weekly is magic! on my mi 10 ultra i had like 100/256gb used of storage that i always suspected were too much for 1 month usage... now i have confirmation of my suspect, after this update they become 45/256gb... how is it possible?? all my data still here of course
Hi.. May I know which twrp r using for mi 10 ultra?
 
my volume slider does not disappear until you tap on the screen. What could be the problem?
 
ì also still on 0623, as long as others still have issues.... i keep using this one
I can't find any issue on twrp 1206 as well , it works like 0623 , no differences ..
You can flash and boot to system without issues ( only known issues remaining )..

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.
 
  • Like
Reactions: Allessa
I receive a lot of notifications in status bar: SIM activation service. It`s this normal?

And i can`t copy-paste...
I have the same problem. I've now deactivated the notification once. But I don't know whether that makes sense in the long term.

Poco F2 Pro
 
Hi guys. Hmm, I rarely update my ROM, I am coming from 20.6.4 and want to update again after 6 months. Just wondering which is twrp I should use on my mi note 10? And are there special instructions needed or I'll just follow again the usual step on the instruction. Just making sure before I start downloading all files needed again.

1607678035661.png 1607678116954.png
 
so i can install the new rom via OTG USB?
Yes - you should be able to install it via OTG-USB. However, you will not be able to clear the Dalvik and cache. How relevant that will be, I cannot say. As I always do, I would recommend backing up before installing the new ROM.
 
big thank for the Dev for there work ,,,
Mi 10 umi i have this problem's :
1- when i put the phone on silent mode and back to sound mode the notification sound are mute even when volume notification bar are full to fix it i must decrease the notification sound and increase it again .
2- no copy paste in system App and no permission to use clipboard when i copy text from any app and try paste it on ( note , browser , ...) nothing happen
 
Status
Not open for further replies.

Similar threads

  • Locked
HyperOS 1.0 24.3.4
Replies
150
Views
42K
  • Locked
HyperOS 1.0 24.2.26
Replies
161
Views
49K
  • Locked
HyperOS 1.0 24.1.29
Replies
227
Views
120K
Replies
259
Views
66K