[HowTo] Install Fastboot image


Try to install the drivers according to this guide.
I also tried these drivers !!! I tried to uninstall all the drivers and redo the procedure! As soon as I connect the phone, it sees it as an MTP device and gives me an error. I don't know what to do anymore! I doubt that it is a hardware problem!
 
Last edited by a moderator:
I tried contre different operating systems w7 - w10-w11 but as soon as I connect the phone does the driver search and then tells me "USB MTP device" failed, Now I tried to colelgare my old mi9 t pro and recognized it right away! I flashed the xiaomi eu, then I rooted the phone, immediately after I connected the phone to the pc to put files inside and it worked!!! Then at the imporvviso has no longer worked the usb debugging! I reflected the rom and put the root back! I reviewed and revised the svuluppatore options, the various settings to understand if 'it was some wrong entry. or tried on several new PCs! I have installed any type of driver. I tried the cable on another phone. I tried to put an otg stick and I am recognized by the phone (so I have no problems with the usb connector!) Isn't there some developer who could help me?
 
I would like to reset the phone with global rom and see if the problem is solved otherwise I bring it to assistance !. To do this I have to.
Download the global fastoboot rom
vili_eea_global_images_V13.0.9.0.SKDEUXM_20220329.0000.00_12.0_eea_5a0a4d7f40
Install it via mi flash
just this right?
 
Now my phone is run on Miui 12 stable. Should I execute "windows_fastboot_update_rom.bat" if I update from Miui 12 stable to Miui 13 stable? or clean install?
 
Hey everyone, I solved the problem! I put back the original global stock by formatting the whole phone, then I put back the eu with root and everything worked. Perhaps the problem was that while restoring the applications made on the old mi9 t pro he also copied some system files of the mi9 t pro and therefore there was some conflict.
 
  • Like
Reactions: katerpanne
Now my phone is run on Miui 12 stable. Should I execute "windows_fastboot_update_rom.bat" if I update from Miui 12 stable to Miui 13 stable? or clean install?
I am in the same situation. I have to add that I have installed TPRW and I know that it's not compatible with A12. Have I to remove it (installing before the stock recovery) or I can directly install the last update 13.02, with the relative bat file, without data formating?
The stable 12.5.9 version is very good in all aspects but I am curious and want to try last version.
Thank you for your great job!
 
I ran the update script but it stays on "waiting for device" and nothing happens. I have enable the usb debbuging. Any advise?
 
Are you connected to a PC in fastboot mode?
Do you have the necessary drivers on your PC?
You will find them in the first post of this thread.
 
  • Like
Reactions: jorvacf
Hi i try to update my phone from 13.0 to 13.0.9 i follow all your steps and on the cmd is all fine and running and after that my phone restart but its still 13.0 can someone help me.
My main language is German so in german i can mabye unterstand more haha
 
Hi i try to update my phone from 13.0 to 13.0.9 i follow all your steps and on the cmd is all fine and running and after that my phone restart but its still 13.0 can someone help me.
My main language is German so in german i can mabye unterstand more haha
is 13.0 xiaomi.eu rom / weekly / stable ?
 
is 13.0 xiaomi.eu rom / weekly / stable ?
stable

but i think i know my faul i try to update the 13.0.9 version because on my Phone told me the newest update is 13.0.9 but evertime if i try to install this version it change nohting, but just now i try to install 13.0.12 and now its all complett and my phone is on version 13.0.12
 
  • Like
Reactions: katerpanne
Stuck on >>Sending 'boot_a'<< for some time now.

later edit:
|Managed to make it. Now it is running the last ver. -Poco f3

Question: I want also to update a mi10t lite. I run Miui 12 12.6 weekly. If i go for miui13 weekly with fastboot will i lose any data?

Later later edit :
All went well, no data was lost with update command in cmd.

Thanks
 
Last edited:
How to install a xiaomi.eu fastboot image

- Perhaps you have an update info on your phone
-> Its only an info that an update is available
- Update is only possible with fastboot / PC and not with TWRP

and here we go ....

- you need to unlock bootloader
-> a small [howto] to unlock bootloader

Install Tools and Drivers
- install USB drivers & adb and fastboot tools (Windows 10)
- install SDK Platform Tools (Windows 10 & 11 / Mac / Linux)
- install xiaomi drivers (sometimes necessary)
-> a small [howto] if you have driver issues

- create a directory "c:\test"
- download fastboot image for your phone to PC
-> choose stable or weekly like you want or need
- extract the fastboot image into this folder c:\test

- open "cmd.exe" on your PC
- change to directory were you have installed adb & fastboot
-> eg "cd c:\adb" hit RETURN and type "dir"
- there should be this files:
1641463695627.png


- connect PC and phone with USB cable
- put phone in fastboot (reboot phone and then holding "Volume -" and "Power on" buttons simultaneously)
- you should see a bunny picture and an info "fastboot" on the phone
-> on some devices you will see orange info "FASTBOOT" (new fastboot logo)
1641373752213.png


please do this step to prevent from black window
- type in "cmd window": "fastboot devices" and hit RETURN
- check if you see a number (sometimes with characters)
-> then all is fine
1641373554513.png

- if you dont see a number:
change USB port / change USB cable / use USB 2.0 / use an USB Hub / check driver installation

do this only if "fastboot devices" shows a number / characters
- the "cmd window" should be open on PC
- change to "c:\test"
-> eg "cd c:\test" hit RETURN and type "dir" hit RETURN
- you should see the scripts with ".bat" at the end of filename

- start the appropriate bat-file
-> dont click it in explorer with mouse pointer
-> start the bat-file from command-line
-> then its possible to see errors

-> type in the "cmd window" windows_fastboot... and hit RETURN

Which is the appropriate *.bat file you have to execute

- if you install the xiaomi.eu rom for the first time
- if you change from weekly to stable (recommended)
- if you change from stable to weekly (recommended)
-
you will loose your data -> make a backup

windows_fastboot_first_install_with_data_format.bat

- if you update from weekly to weekly
- if you update from stable to stable

- you will not loose your data
windows_fastboot_update_rom.bat

PS: There are *.sh files for MAC & Linux as well
Linux HowTo

Thats all ... voilla .....


Here are some hints and solutions for issues:

Change between stable and weekly or vice versa
-> recommended choose the bat file with format in the filename

You can check if your device is unlocked
fastboot oem device-info
-> there is a line "Device unlocked = true or false"
--------------------------------------------------
If you dont see "Mi Unlock Status" in developer options
-> your device is also unlocked

Telegram, WhatsApp, Gmail, MI Backup issues
--------------------------------------------------
Settings> about phone> factory settings> erase everything

Permission app issues - clear data & cache
-> Settings > apps > manage apps > click "show all apps" from top right menu
-> Search for permissions
--------------------------------------------------
Fix it with giving that app all permission in first turn on

This info you can ignore while flashing
Sending 'storsecbak' (20 KB) OKAY [ 0.002s]
Writing 'storsecbak' FAILED (remote: '(storsecbak) No such partition')
fastboot: error: Command failed

Disable green icon until reboot (mic & camera security)
adb shell cmd device_config put privacy camera_mic_icons_enabled false default

How to install Magisk without TWRP


Thx for some tips:
@geoorg / @h.gobbah / @LOLO9393 / @JiaiJ

# fastboot, install A12, OTA, update info, black window, driver usb, adb,
it doesn't work for me I don't have a system on the phone I have orangefox but nothing works with it I wanted to put the basic one back but it doesn't work I don't know why
 
it doesn't work for me I don't have a system on the phone I have orangefox but nothing works with it I wanted to put the basic one back but it doesn't work I don't know why
if you have orangefox why dont you install a recovery rom?

if you want to install the original rom use the miflash tool and the image for your device as exmple from this side
https://mifirm.net
 
Hi @katerpanne thanks again for this guide!

I'm on my Mi 11 Ultra with latest stable MIUI 13 (V13.0.13.0) on TWRP from skkk (i don't remember the specific version)... now: if i want to update to latest MIUI 14 preview with fastboot, what can i do?

Thanks for the help!