Thank you for replying but this option is alreadt "off". My phone is not flashing when it rings, but the flash turns permanently on while I am speaking. But it only happens once every two incoming callsGo into the (Xiaomi) dialling app; go to the menu (three bars on bottom left of the dialling pad); Incoming call settings; Flash when ringing. Turn it off.
Interesting ........
If you have not already done so, try rebooting.
If you have done that, then (if you know how) clear the Dalvik and Cache, and delete the (system)/data/system/package_cache folder.
See how that goes.
I have also Mi9lite and last update is exceptionally good respect battery saving. I think that you would have to control where the draining is from.The latest update has become more battery draining mi 9 lite / cc9
They are BETA - typically waiting for feedback on the bugs. If you are looking for a stable release, then that is exactly where you should be looking, not at the weekly beta ROMs.
And asking if something is 'stable enough' is totally subjective. Your standards and needs are quite probably very different to someone who is providing feedback.
I am not sure if it is due xiaomi rom, but after last update I keeo getting message in chrome which is saying chrome read copied data but I cannot paste anything in chrome
i was have the same problem in my mi note 10 and i fix itI experience huge battery drain through logd process.
What can I do to fix that?
Drained about 60% during night.
Thank you all
Envoyé de mon POCO F2 Pro en utilisant Tapatalk
Don't turn across problem in circle!Please help.
Mi 10.
Used to ROM 20.11.5.
Following the OP installed the new TWRP.
I successfully booted into recovery, installed the ROM successfully; and after rebooting I again boot into TWRP.
Bootloop into TWRP
I tried to install the old recovery, reinstall the new TWRP over the .bat file, download, and reinstall the ROM.
Is there an opportunity to somehow boot into the system without format data?
Don't turn across problem in circle!
You must format data if you are on stock rom.
And flash via external SD card or OTG stick if on EU rom.
Sorry.
got it.I was on beta 20.11.5 and I flash new TWRP and 20.11.12 via OTG stick...
Did you try installing the correct recovery through Fastboot?Please help.
Mi 10.
Used to ROM 20.11.5.
Following the OP installed the new TWRP.
I successfully booted into recovery, installed the ROM successfully; and after rebooting I again boot into TWRP.
Bootloop into TWRP
I tried to install the old recovery, reinstall the new TWRP over the .bat file, download, and reinstall the ROM.
Is there an opportunity to somehow boot into the system without format data?
got it.
Subject was heavily discussed on this topic, just scroll down some pages.
Did you try installing the correct recovery through Fastboot?
fastboot flash recovery recovery-TWRP-umi-after-05_11_2020.img
Then you can boot into that recovery with:
fastboot boot recovery-TWRP-umi-after-05_11_2020.img
Then you can re-install the ROM through USB-OTG
got it.
Subject was heavily discussed on this topic, just scroll down some pages.
How about just one command each time you go into Fastboot?It did not help.
I went through the entire thread of this update, but all I found was a problem with the bootloop in fastboot, not in TWRP.
How about just one command each time you go into Fastboot?
Have you tried:
fastboot reboot
is rooting will pass cts, integrity & saftynetBoot (not install) into TWRP recovery then install Magisk 21005, reboot to system then install Magisk Manager 8.0.3 from official source. If needed use Canary channel to update (with direct install) the Magisk core.
G.
what is meant by install via USB-OTG. this is cable as far as I know?can anyone explain the procedure for me?
Presumably the TWRP recovery you go into is the 3.4.0-11.0-1110 (LittleTurtle2333)?I have got a bootloop into TWRP, not fastboot.
But yes, I have tried "fastboot reboot" ... and I was boot into TWRP again...
OUG-USB CABLE use cable onside insert usb(flash) drive other side your mobilewhat is meant by install via USB-OTG. this is cable as far as I know?can anyone explain the procedure for me?
We use essential cookies to make this site work, and optional cookies to enhance your experience. Cookies are also used for ads personalisation