MIUI 12.3 20.12.9/10


Do you like this MIUI version?


  • Total voters
    336
Status
Not open for further replies.
Unfortunately, I don't have a VoLTE icon, even though it's turned on everywhere. The VoLTE calls go with.
View attachment 33466 - 20.12.10 - There is no VoLTE icon :(

View attachment 33467 - 20.12.2 - There is a VoLTE icon :)
Same hare no VoLTE icon in status bar despite VoLTE calls are working great. Only feedback is the call history where 4G calls are registered as VoLTE

Sent from my Mi 10 Pro using Tapatalk
 
Mi 9T here, with 20.9.17, and to flash 20.12.10:
1. boot into TWRP
2. advanced wipe
3. format data and wipe cache/dalvik cache
4. install xiaomi.eu_multi_hmk20mi9t_20.12.10_v12-11.zip
5. reboot
6. enjoy

i will loose all my configs and data, but this is the right way to do it right?
 
About missing VoLTE icon: on Lavender it's missing since long time (since 20.3.19?). But VoLTE is working. Seems to be a decision or bug from Xiaomi?
 
can i flash this rom on Mi 10T Pro (apollopro) ?
it confuses me a bit that the devices have the same rom.
xiaomi.eu_multi_HMK30SUltra_MI10T_20.12.9_v12-10

which twrp recovery is the right one for apollopro mi10t pro?
I have the same doubts !!! If someone were so kind or had already flashed it, to give us some information, we would be very grateful.

Thanks and greetings !!!
Yes you can flash it , OP said that they made the rom for both devices ..
The problem with first releases was the camera , now this issue should be solved that's why the announcement for apollo this week ..
You can also download the stable version for Mi 10 T pro to have it , in case you have issues you can flash it for sure ..

Mi 9T here, with 20.9.17, and to flash 20.12.10:
1. boot into TWRP
2. advanced wipe
3. format data and wipe cache/dalvik cache
4. install xiaomi.eu_multi_hmk20mi9t_20.12.10_v12-11.zip
5. reboot
6. enjoy

i will loose all my configs and data, but this is the right way to do it right?
You can do a dirty flash over 20.9.17 , you can do just a factory reset and finally you can also format data but at the steps you wrote , do not forget after format data to reboot to recovery , if you miss this , rom will not boot ..
 
  • Like
Reactions: nostromoito
You can do a dirty flash over 20.9.17 , you can do just a factory reset and finally you can also format data but at the steps you wrote , do not forget after format data to reboot to recovery , if you miss this , rom will not boot ..

But can I keep all my files and stuff? 20.9.17 is Android 10 and 20.12.10 is Android 11. Since is two different android versions can I dirty flash without loosing all my data?
 
Yes you can flash it , OP said that they made the rom for both devices ..
The problem with first releases was the camera , now this issue should be solved that's why the announcement for apollo this week ..
You can also download the stable version for Mi 10 T pro to have it , in case you have issues you can flash it for sure ..


You can do a dirty flash over 20.9.17 , you can do just a factory reset and finally you can also format data but at the steps you wrote , do not forget after format data to reboot to recovery , if you miss this , rom will not boot ..

Many thanks !!! I'll get to it
 
You can always update Android version without format data. ;)
So

1. boot into TWRP
2. advanced wipe
3. wipe cache/dalvik cache
4. flash xiaomi.eu_multi_hmk20mi9t_20.12.10_v12-11.zip
5. reboot
6. enjoy upgrade from A10 to A11 with all my data intact?
 
  • Like
Reactions: gkalen
About missing VoLTE icon: on Lavender it's missing since long time (since 20.3.19?). But VoLTE is working. Seems to be a decision or bug from Xiaomi?
As I often do, I was messing about with the VoLTE settings and got stuck with VoWiFi (icon). Calls were now made using VoWiFi. I could not change VoLTE back. So I did more research, and came across this site (in German). There was a new code there
VoWiFi/WLAN-Anrufe: *#*#869434#*#* (Anrufe = Calls)
I keyed it in and VoLTE (plus correct icon) came back, and VoWiFi went.
So, just a suggestion if it is worth you trying. I only keyed it in once, so I do not know if it is a toggle switch, or a permanent setting.
 
You can always update Android version without format data. ;)
You mean even going from one stable to another, no format data is needed?
I mean specifically last A10 to last A11 version.

Послато са Mi 10 помоћу Тапатока
 
You mean even going from one stable to another, no format data is needed?
I mean specifically last A10 to last A11 version.

Послато са Mi 10 помоћу Тапатока
No need format data , factory reset or any other thing to update or upgrade ..
Only if you have problems you can do a factory reset firstly and after that if you still you have issues you can do a clean flash with format data ..
Personally never did an update or upgrade by formating data or factory reset ..
On most cases users don't faced issues ..
 
I have a problem recieving some text messages with this rom on Mi Note 10, theres a few of my contact who get my sent text ok but I dont get their replies. I reset network then did factory reset but problem remains . Sim provider says things ok their end
 
Szia! Szeretném megkérdezni, hogy mikor lehet letölteni a Xiaomi Mi 9 Android 11 frissítését a xiaomi.eu webhelyről? Köszönöm.
 
Thanks for the solution, I will try it out now and comment if it worked.
For those with Redmi Note 8.
Today I had a random problem with the contact list, they disappeared suddenly so, I synchronized all the settings manually and they came back. Then I rebooted the phone (this is not the first time I reboot with this version), and magically the lag problem I had with the RN8 completely disappeared, I also went from 800mb of free ram to 1.9G! Now the phone works very fast and smooth!
Apparently the solution that worked for me was to restart it several times until it works fine again.
 
For those with Redmi Note 8.
Today I had a random problem with the contact list, they disappeared suddenly so, I synchronized all the settings manually and they came back. Then I rebooted the phone (this is not the first time I reboot with this version), and magically the lag problem I had with the RN8 completely disappeared, I also went from 800mb of free ram to 1.9G! Now the phone works very fast and smooth!
Apparently the solution that worked for me was to restart it several times until it works fine again.
Yes, as @Ксения mentioned a few posts back it stabilizes at some point, what is the trigger is not entirely certain, for you it was the restart. I got Google back up running again by updating the Play services. I cannot update the Google Play System Update and it is stuck at March, I remember it being September or November before I clean flash the ROM. Can someone else check what is the version on their RN8? This and the broken decryption in TWRP are the only major issues I have with the weekly currently.
 
  • Like
Reactions: Ксения
Hi, i need some help. I have TWRP-3.4.2b-0623 on my mi 10 ultra, and i tried to install xiaomi.eu_multi_MI10Ultra_20.12.10_v12-11 or xiaomi.eu_multi_MI10Ultra_V12.0.15.0.QJJCNXM_v12-10. And after install i did whipe dalvic and cache and a Format Data, but when i reboot it shows MI logo twice and then goes in to TWRP again:( What am i doing wronge? And i have already googled for solutions but coud not find one.
 
Hello.
I did a clean install.
But now I can't decrypt data in recovery.

TWRP Version: 3.4.2b-1208
Build Date: 2020 12 08 01:43:42 CST
Build User: wzsx150
Build Device: Mi 10 Ultra
Decrypting FBE for user 0...
Failed to decrypt data.
Unable to decrypt with default password. You may need to perform a Format Data.

Updating partition details...
...done
Decrypting FBE for user 0...

Failed to decrypt data.

Same result was with previous TWRP.
Device is Mi 10 Ultra.
 
Hello.
I did a clean install.
But now I can't decrypt data in recovery.

TWRP Version: 3.4.2b-1208
Build Date: 2020 12 08 01:43:42 CST
Build User: wzsx150
Build Device: Mi 10 Ultra
Decrypting FBE for user 0...
Failed to decrypt data.
Unable to decrypt with default password. You may need to perform a Format Data.

Updating partition details...
...done
Decrypting FBE for user 0...

Failed to decrypt data.

Same result was with previous TWRP.
Device is Mi 10 Ultra.

try to disable password( pattern,...) in miui
my k30pro did that
 
  • Like
Reactions: Emilis
Hi, i need some help. I have TWRP-3.4.2b-0623 on my mi 10 ultra, and i tried to install xiaomi.eu_multi_MI10Ultra_20.12.10_v12-11 or xiaomi.eu_multi_MI10Ultra_V12.0.15.0.QJJCNXM_v12-10. And after install i did whipe dalvic and cache and a Format Data, but when i reboot it shows MI logo twice and then goes in to TWRP again:( What am i doing wronge? And i have already googled for solutions but coud not find one.
Why format data after you have installed the ROM?? The installation process, in most instances, correctly prepares for the ROM.
Try installing the ROM again.
If it does not load the system, try a Factory reset from within TWRP.
 
Clean install
Full wipe and install with new twrp 1206 + OTG

100% perfect and stable
Thanks devs for this amazing job

Screenshot-2020-12-10-19-02-45-571-com-android-settings.jpg
what is the font name bro ? thx
 
try to disable password( pattern,...) in miui
my k30pro did that

I turned off screen lock and removed PIN code. The data isn't encrypted any more.
But now when I try to flash Magisk-v20.4.zip in TWRP, nothing changes. After reboot I don't have root.

Edit:
I also noticed that in TWRP report it says:
Failed to unmount '/system_root' (Device or resource busy)
 
Status
Not open for further replies.

Similar threads