MIUI 12.5 21.1.13/14


Do you like this MIUI version?


  • Total voters
    258
Status
Not open for further replies.
i have a problem with my mi 10T Lite when installing weekly rom...
so I started with unlocking the phone with mi unlocking tool,
after that, I entered fastboot with adb of the link u send and flashed recovery twrp.
after that was done I booted to twrp and put the rom weekly zip on the sd-card.
installed it and deleted data, cache and dalvik.

now when i press reboot i reboot back to recovery? what did i do wrong or what can i do now?
 
From @Lenny156 infos (here), here is a solution to boot issue (on Mi 9 SE "grus" device):

1) Download this TWRP:
2) Flash it, so: fastboot flash recovery twrp_grus_MI9SE_3.5.A9_15-01-2021_bl-l_fix_install.img

3) Download this vbmeta file:
4) Flash it, so: fastboot --disable-verity --disable-verification flash vbmeta vbmeta-grus.img

(If you see "unknown option -- disable-verity" => Update your fastboot & adb tools (download here) then retry step 4)

5) Reboot your device

;)

Hi, i have made exactly your solution, after phone reboot wifi is missing, and from fatboot is not possible boot to recovery.
 
Try to format data ( Wipe / Format data / type yes and hit enter )..
Then go back and Reboot to System ..
Format data is mandatory for first installation of EU rom..
 
  • Like
Reactions: patrickkok
Mi9 se Hi guys im currently on 20.11.5 and recovery img is twrp 3.3.1-3 grus i update using usb whats the best solution to update i forgot how to do it on pc i know some users still having issues or they not following the instructions properly is it just better to stay on the current version without going through all the hassle.
 
Try to format data ( Wipe / Format data / type yes and hit enter )..
Then go back and Reboot to System ..
Format data is mandatory for first installation of EU rom..
that was the trick! thank u!
so when I rebooted without formatting data I did not interrupt any of the system or? just good to go or install rom again or twrp?
 
that was the trick! thank u!
so when I rebooted without formatting data I did not interrupt any of the system or? just good to go or install rom again or twrp?
If you already install the rom zip just format data and reboot to system ..
If you're not flash yet , then format data , reboot to recovery and when device enters to twrp again you should copy the rom to storage and flash it ..
Wipe cache and dalvik as soon as installation finish ( you'll see the option on the left ) and reboot to system ..
And your device is new , it's time to see the behaviour of twrp now ..

EDIT
I don't know which one twrp you use , we have a twrp for gauguin from @geoanto555 , here .. https://www.mediafire.com/file/qaea...0I_3.5.A10_05-01-2021_BL-L-fixsdcard.img/file
 
Last edited:
Just want to say I installed the latest build for my Mi 9, and it is smoother than my previous build of MIUI 12.2. I can play Temple Run and Mandora without lag that I previously had. The only troubles I have are the voice matching and full screen gestures not working with other launchers. Apart from that, it is a great build.


Sent from my iPad using Tapatalk
 
@geoanto555 since your github doesnt mention grus at all, do you have any other place? Because I only found out about your version from this discussion, if this recovery is buletproof for grus, it should be known, since there so much wrong installs because of many twrp versions. Thanks.
 
dont try "fastboot boot nametwrp.img" with this twrp.
Install stock boot image and reinstall twrp
"fastboot flash recovery nameoftwrp.img"
"fastboot reboot" with vol + to boot

I was gone manually to fastboot, repeat the procedure of Poney70, i digit "fastboot reboot".
After reboot if i go to recovery i can't see the rom inside it, i think mean that twrp don't decrypt.
The room works well, but is not possible for me flash next rom in the future.
 
Had problems booting in fastboot after installing magisk on the first miui 12.5 android 11 for Mi 9.
Today solved... and finally managed to install EU rom without OTG. Here are the steps below
1. From your current rom set PIN or pass
2. I used OrangeFox Recovery then decrypt if asked for pin or pass.
3. Wipe Davlik Art/Cache/System/Cache/Data
3. Format Data
4. Reboot to recovery again
5. Connect cable and trasfer rom to internal memory when in recovery
6. Install
 
Finally updated to this rom after 5 mths. Huge increase on general performance.
None problems yet. (Tucana)

A great thanks goes for all devs for their efforts.
 
  • Like
Reactions: Steel1986
I was gone manually to fastboot, repeat the procedure of Poney70, i digit "fastboot reboot".
After reboot if i go to recovery i can't see the rom inside it, i think mean that twrp don't decrypt.
The room works well, but is not possible for me flash next rom in the future.
If the TWRP recovery that you are using cannot decrypt, then you should be able to have to option to use the USB-OTG for installation of future ROMs.
(This is according to my Mi 10 (umi) installations)
USB-OTG = Putting your new beta ROM onto a USB memory stick;
Connect it to your OTG socket (typically Type C USB, where you charge)
Within TWRP, go to Install
Select Storage/ USB OTG
Select your installation file
Continue as normal for installation.
 
  • Like
Reactions: iron58p
Where's the easter egg in control center?
When you activate the Android 11 Easter Egg, you can toggle the cat controls on (control center > Smart Home), which show in the control center.
However, if you activate it and pull down the control center, it freezes and you have to reboot.
 
  • Like
  • Wow
Reactions: Lwrnt and geoorg
When you activate the Android 11 Easter Egg, you can toggle the cat controls on (control center > Smart Home), which show in the control center.
However, if you activate it and pull down the control center, it freezes and you have to reboot.
Thanks for sharing, didn't know about this feature
 
When you activate the Android 11 Easter Egg, you can toggle the cat controls on (control center > Smart Home), which show in the control center.
However, if you activate it and pull down the control center, it freezes and you have to reboot.
Yes , it doesn't work , it's freezing with this update..
Thanks for sharing, didn't know about this feature
Hit several times to android version , turn around the circle 3 times and will activated..
Then you can choose it from control center settings , but has problem with this version..

Screenshot_2021-01-16-21-14-02-301_android.jpg Screenshot_2021-01-16-21-14-32-870_com.android.settings.jpg
 
Why that?
Can't boot after flashing stable to weekly and vice-versa because of different bases (developer vs stable )
After flashing You have to do a factory reset or format data if factory reset doesn't let you boot
 
Last edited:
Status
Not open for further replies.

Similar threads