MIUI 12.5 21.2.3/4

[geoorg]

I'm using an encrypted Mi9TPro rooted with Magisk 21.4 (and a few active modules). If i dirty flash latest Beta over previous Beta, will I loose Magisk?

Yes, but very easy to get back magisk.
After flashing, reboot to your home screen
Then you can reboot to recovery and flash magisk.

All your modules will be intact

Cheers!


EDIT: the reason for 1st boot to your homescreen is to make sure the update went smoothly, and not magisk or any modules causing any bootloop.

 

[FopiFopi]

I just tried to update to latest beta ROM via phone update tool (first time, before I updated via TWRP).
Now the phone is stuck in fastboot. What can be done?

mi9 se, 21.1.20 beta before the update

 

[dexterv]

In my redmi note 8 I can't get volte or vowifi for this issue I can't make any call,is anyone faced this issue?if yes then give some solutions for this.

What exactly is your issue? I have the Volte icon and it looks active on my RN8. I can make calls but I have no certainty that the other side has this enabled.

 

[MMETMA66]

@Igor Eisberg
Please look into the matter.
K20 Pro system destroyed is happening more than randomly both on twrp and ofox (latest).
And in both scenarioes, dirty n clean.
Just needs to unlock bootloader n system boots to newly flashed Eu rom. No encryption or data wipes. Even custom recovery survives.
Thanx

You sure that there's no data lose?

Sent from my Redmi Note 7 latest Eu beta

 

[Alok pupun]

What exactly is your issue? I have the Volte icon and it looks active on my RN8. I can make calls but I have no certainty that the other side has this enabled.

When i try to flash latest beta eu i noticed my volte not shown,i think it would be fixed by reboot but not work,then i pull the sim and reinstall again not work,then try fastboot rom ofcourse official stable then volte work,again i flashed eu and the issue again arrived,finally i fastboot again and looking for solutions,if you have any solutions then please suggest

 

[rockyanexpert]

You sure that there's no data lose?

Sent from my Redmi Note 7 latest Eu beta

Mine was bricked "System Destroyed"
No data loss here.

 

[rockyanexpert]

I just tried to update to latest beta ROM via phone update tool (first time, before I updated via TWRP).
Now the phone is stuck in fastboot. What can be done?

mi9 se, 21.1.20 beta before the update

Check bootloader locked or unlocked first.

 

[Manfred62]

You're a genius, this actually worked.... Thank you!

Maybe not a model issue, but a country issue, since I'm also from Germany...

Seems to be a model issue too? On lavender there's no modem test tool unfortunately.

 

[Oldbiggy]

Redmi Note 7 works great. Thanks.

 

[KcNirvana]

I just tried to update to latest beta ROM via phone update tool (first time, before I updated via TWRP).
Now the phone is stuck in fastboot. What can be done?

mi9 se, 21.1.20 beta before the update

Here you go:

https://xiaomi.eu/community/threads/21-1-13-14.59414/page-18#post-585334

 

[Daume]

Still issue with fingerprint persists in MI9 :
Maybe someone could help me? fingerprint stopped working for my MI 9, "could not add fingerprint, try again later" when trying to add new fingerprint.
I have tried calibration which was posted in here:

Try recalibrating your FoD via Android's built-in CIT.
1) settings
2) my device
3) tap 5 times on the kernel version to enter CIT
4) open additional tools by pressings on the 3 dots top right corner.
5) select FOD fingerprint calibration
6) Try to configure your fingerprint again as phonelock.

When I try to run this, I always receive:

Can someone help me solve this?
Thanks

fingerprint stopped working after update 21.1.13/14 or 21.1.20/21

 

[Silvio1953]

I updated my phone (Mi9 lite) without any problem (dirty install) and everything seems perfect, even smoother than before. Thank you to developers!

 

[nitroax]

Still issue with fingerprint persists in MI9 :
Maybe someone could help me? fingerprint stopped working for my MI 9, "could not add fingerprint, try again later" when trying to add new fingerprint.
I have tried calibration which was posted in here:

Try recalibrating your FoD via Android's built-in CIT.
1) settings
2) my device
3) tap 5 times on the kernel version to enter CIT
4) open additional tools by pressings on the 3 dots top right corner.
5) select FOD fingerprint calibration
6) Try to configure your fingerprint again as phonelock.

When I try to run this, I always receive:

Can someone help me solve this?
Thanks

fingerprint stopped working after update 21.1.13/14 or 21.1.20/21

I had the same issue, in all 12.5 beta builds. I managed to register my fingerprint by rubbing my finger on my pants and imediattly register. Unlock works like normal.. i don't know the cause of this but well... Fingerprint registers great on stock Miui 12 and AOSP roms...

Try it

 

[dexterv]

When i try to flash latest beta eu i noticed my volte not shown,i think it would be fixed by reboot but not work,then i pull the sim and reinstall again not work,then try fastboot rom ofcourse official stable then volte work,again i flashed eu and the issue again arrived,finally i fastboot again and looking for solutions,if you have any solutions then please suggest

I have no suggestions unfortunately. It seems quite a few people have this issue with operators from Germany (not sure if this is your case) but RN8 doesn't have the modem utility for the mentioned workaround. As I said I seem to have VoLTE and VoWifi working on my network. There were some changes made to these services. I am sure the dev team will sort it out, make sure to check if you can help them in any way - such request was mentioned in the first few pages for other devices.

 

[Salieri99]

Both VoLTE and VoWiFi are working great on my Mi10Pro.

Open Modem test tools by using *#*#663368378#*#* code in dialer > Open MBN config loading and activing tool > select mbn_eea.txt for SW MBN > tap on validate > wait some secs for update.

See attached screenshot

View attachment 34648

Sent from my Mi 10 Pro using Tapatalk

That code doesn't work for me, is that any other code or method? Thanks.

 

[jaymeferreyra]

Excellent rom for Mi 10
The only issue is the error message when rebooting "Mi Connect keeps stopping"

Enviado do meu Mi 10 através do Tapatalk

 

[Iain_B]

Excellent rom for Mi 10
The only issue is the error message when rebooting "Mi Connect keeps stopping"

Enviado do meu Mi 10 através do Tapatalk

Agree - a great ROM. (Mi 10 - umi)
I've never had the 'Mi Connect keeps stopping' message.

 

[jenaplisken]

dirty flash on mi 10t pro. all is ok.
even with previous versions I have these two bugs:
1 call waiting alert - every time I restart the smartphone I find it active on both sims and I have to deactivate it.
2 lock screen photos - every time I restart the smartphone the photo is zoomed and I have to reset it with the system launcher.

 

[blent]

I updated my phone (Mi9 lite) without any problem (dirty install) and everything seems perfect, even smoother than before. Thank you to developers!

strange, it seems to me that it is very slow in opening apps

 

[raul61]

That code doesn't work for me, is that any other code or method? Thanks.

you can try these standard codes to activate/deactivate VoLTE / VoWIFI.
act like toggle - so pay attention to the reply message (activate or deactivate for sim #)
Use these codes in the dialer:
VoLTE *#*#86583#*#* | activate VoLTE
VoWIFI *#*#869434#*#* | activate VoWIFI
also you can check IMS status if no VoLTE/VoWIFI icon is shown in the status bar as followed:
Open the dialer and enter the code: *#*#4636#*#*
This will open the Testing menu. Select the first entry "Phone information".
In the option "Select phone index" you can choose your sim card you want to get information about.
Then, press the three dotted menu in the upper right and select "IMS Service Status"
If it says "IMS Registration: Registered" everything is working fine. Depending on whether you are on WiFi or LTE, "Voice over LTE" or "Voice over WiFi" will be shown as "Available as well.
if your IMS service is not activated (and you use to have it available) you can use Activity Launcher app to launch the MBN tool and load your provider specific profile for modem config from the list provided there.

 

[Salieri99]

Thanks, I only used the first code and now vowifi works and I think volte too. I think rom update disabled it.

Thank you very much.

 

[vanutama]

RN8 feedback:
Dirty update with wipe of Dalvik and cache. No issues, runs well.

Changes noted:

• February security update.
• Automated tasks are working again
• Weather wallpaper is working so far - you have to install it manually
• Can someone spot something else?

No major issues found yet. Big thanks to the developers.

What do you mean by install weather wallpaper manually? Are there apk file?

 

[aaccaa89]

Mi9t pro doesnt work full screen gestures, few updates log?

 

[Mi10TLite]

I you can install original boot animation by this link: https://androidfilehost.com/?fid=4349826312261791656 and you can install it from themes application>account>themes>import>select file, now go back in account in application and go into theme customization>select boot animation>select new boot animation and apply. Ido it now and work whit my mi 9T

Thank you, i tried to use it, however the 5G on start is missing, i kinda like the animation and color of both 5g and MIUI

 

[dexterv]

What do you mean by install weather wallpaper manually? Are there apk file?

Yes, it's on apkmirror, the link has been shared in the thread.