HyperOS 1.0 24.1.29


Status
Not open for further replies.
i have same "problem" on mi Xiaomi 13. Just make about 6 hours of screen battery life, just navigating and social networks
Xiaomi 13 Pro - no root.
Just to show my battery times, and settings - not even fully optimised:

Screenshot_2024-02-11-12-29-47-767_com.miui.securitycenter-edit.jpgScreenshot_2024-02-11-12-30-24-661_com.miui.securitycenter-edit.jpg
 
Hi, have you problem with charging speed? Only 9w here with screen on.
It would help if you provided more information:
- phone / ROM name
- any (changed) settings, eg. Battery / Additional features / Boost charging speed
- are you using the original (and undamaged) charger and cable?

My phone charges perfectly (at 120W).
 
It would help if you provided more information:
- phone / ROM name
- any (changed) settings, eg. Battery / Additional features / Boost charging speed
- are you using the original (and undamaged) charger and cable?

My phone charges perfectly (at 120W).
Which app do you use to check your charge?
 
Which app do you use to check your charge?
I don't use an app - it shows on the screen.
If the screen is off, it starts with the percentage, eg. '47%' + 'Quick charge', then it shows the increasing percentage charge, in increments of 0.01%, eg. 47.64%, + '120W MAX' (for a few seconds).

If the phone is on, it displays it at the top, over the notification icons - first 'Charging', then '120W MAX' (for a few seconds) - as below ...

IMG_20240211_235141.jpg IMG_20240211_235049.jpg

I then leave it for around 25 minutes, and it's normally done.
 
Screen refresh rate stuck on 120 Hz between this screen brightness values.
 

Attachments

  • Screenshot_2024-02-12-03-04-58-531_com.android.geto.jpg
    Screenshot_2024-02-12-03-04-58-531_com.android.geto.jpg
    269.5 KB · Views: 138
  • Screenshot_2024-02-12-03-04-01-782_com.android.geto.jpg
    Screenshot_2024-02-12-03-04-01-782_com.android.geto.jpg
    264 KB · Views: 134
Screen refresh rate stuck on 120 Hz between this screen brightness values.
I'm not quite sure what you mean. With the Settings / Display & brightness / Refresh rate / Default, static screens settle to 10%. If some of the information on the page refreshes, then it goes up to 60%.
I do not recognise the pages that you are showing, so I cannot check what my refresh rate would go to.
 
I'm not quite sure what you mean. With the Settings / Display & brightness / Refresh rate / Default, static screens settle to 10%. If some of the information on the page refreshes, then it goes up to 60%.
I do not recognise the pages that you are showing, so I cannot check what my refresh rate would go to.
Screen refresh rate stuck on 120 Hz when screen_brightness have values under 9. Turn on show refresh rate in developer settings and use brightness slider to change screen brightness and you see what i mean.
 
Screen refresh rate stuck on 120 Hz when screen_brightness have values under 9. Turn on show refresh rate in developer settings and use brightness slider to change screen brightness and you see what i mean.
On auto brightness, it settles down to 10; on minimum brightness, it settles down to 60; on maximum brightness, it settles down to 10. It seems to settle at 60 about 2/3 way down to minimum brightness.
It does not seem to reach 120 at any stage, except when actually adjusting the brightness.

This is the screen that I tested it with. No data refreshes itself on that screen.
Screenshot_2024-02-12-03-48-42-167_com.android.settings.jpg
 
On FUXI ( Xiaomi 13 ), it's always stuck at 120hz with auto brightness or manually brightness.
 

Attachments

  • Screenshot_2024-02-12-05-21-43-584_com.TechTool.refreshrate.jpg
    Screenshot_2024-02-12-05-21-43-584_com.TechTool.refreshrate.jpg
    296.8 KB · Views: 119
Last edited:
  • Like
Reactions: Redvex67 and lonzek
On my 13 Pro (nuwa) - no root - it stays around 60. I don't think it will ever go much below that because there is the line constantly scanning.
Screenshot_2024-02-12-04-33-44-032_com.TechTool.refreshrate.jpg
 
But you are with default rate or with personalized refresh at 60hz always?
I'm on the default rate - dynamic.
For instance, when I scroll through the different home screens, it shows 'AUTO', and can then go up to 120 if I scroll quickly, and when I stop scrolling, 'AUTO' disappears, and it settles down to 10.
Memory is cleared regularly ('10 minutes after locking device'), and I often clear Recents. I also sometimes use 'Boost speed' and 'Cleaner'.
 
Updated my ishtar but now experience phone is getting really hot. I'm unable to put it in my pocket because is burning my skin. There is also huge battery drain. Battery shows more than 50% being used by Android core apps. From time to time System UI has stopped error messages appear. Any suggestions how to fix these issues? Thanks for any help.
 
I'm on the default rate - dynamic.
For instance, when I scroll through the different home screens, it shows 'AUTO', and can then go up to 120 if I scroll quickly, and when I stop scrolling, 'AUTO' disappears, and it settles down to 10.
Memory is cleared regularly ('10 minutes after locking device'), and I often clear Recents. I also sometimes use 'Boost speed' and 'Cleaner'.
So, I think it's problem of Fuxi ( Xiaomi 13 ). Mine show always 120hz. Never appear 60hz or less.
 
  • Like
Reactions: DeadRabbitRTA
Hello, since the last update the app Payback no longer works on my Poco F5 pro, I always get an error message: this application cannot be run because the environment is not safe. Can someone help me with that?
 
Hello everyone... I have a technical question.
Is it feasible to enable eSim on a Xiaomi 12 CUPID in some way??
 
On FUXI ( Xiaomi 13 ), it's always stuck at 120hz with auto brightness or manually brightness.
Refresh rate 120 Hz (default) irrelevant of my Brightness settings.I t does go down to 60 Hz after 15 seconds or so.T hen to 30hz if my AOD comes up, after 60 seconds or so.

not sure if this is normal or buggy

Diting / 12T Pro
 
Last edited:
Refresh rate 120 Hz (default) irrelevant of my Brightness settings.
It does go down to 60 Hz after 15 seconds or so.
Then to 30hz if my AOD comes up, after 60 seconds or so.

not sure if this is normal or buggy
But you have Xiaomi 13 or Pro? Mine is always at 120hz
 
On auto brightness, it settles down to 10; on minimum brightness, it settles down to 60; on maximum brightness, it settles down to 10. It seems to settle at 60 about 2/3 way down to minimum brightness.
It does not seem to reach 120 at any stage, except when actually adjusting the brightness.

This is the screen that I tested it with. No data refreshes itself on that screen.
View attachment 51358
I did some reading on the internet and found out that LTPO screens work like that. At lower brightness, they don't reduce the refresh rate so as not to cause the screen to flicker. I didn't know about it and didn't need to write a post.
 
  • Like
Reactions: Iain_B
Been using Interconnectivity between nuwa and pad 6 pro, was working perfectly fine before the update, but now trying to connect I get the following error.
Does anyone know is there any fix for that?
 

Attachments

  • Screenshot_2024-02-15-11-10-17-414_com.miui.home-edit.jpg
    Screenshot_2024-02-15-11-10-17-414_com.miui.home-edit.jpg
    144.4 KB · Views: 72
Status
Not open for further replies.

Similar threads

  • Locked
HyperOS 1.0 24.3.25
Replies
169
Views
65K
  • Locked
HyperOS 1.0 24.3.18
Replies
115
Views
42K
  • Locked
HyperOS 1.0 24.3.11
Replies
128
Views
45K
  • Locked
HyperOS 1.0 24.3.4
Replies
150
Views
47K