[GUIDE] How to install Xiaomi.eu ROM for Redmi Note 9S / 9 Pro
- Thread starter ingbrzy
- Start date
LOLO9393
Members
- Feb 8, 2016
- 3,227
- 322
LOLO9393
Members
- Feb 8, 2016
- 3,227
- 322
Perfect!
My Redmi note 9s flash eu rom 11.0.8 via TWRP work fine. (Don't ask me how to do it. I know you struct on fastboot loop.)
Thank EU dev so much.
But avoid to root with Magisk. Stay unroot until new release or corrective.
kauw5164
Members
- Apr 10, 2018
- 41
- 20
LOLO9393
Members
- Feb 8, 2016
- 3,227
- 322
Problem is related to reboot after root right is given to file explorer.
Try it...
It is only available here:
I don't know why.
kauw5164
Members
- Apr 10, 2018
- 41
- 20
Yes sure i have the same problem when file explorer access root. When reboot it will go to fastboot loop.
System and Vendor go to read-only mode. And i try to replace file system via TWRP it can't.
Last edited:
LOLO9393
Members
- Feb 8, 2016
- 3,227
- 322
sorry!
if you want to use root file explorer don't forget to remove the root before any reboot.
kauw5164
Members
- Apr 10, 2018
- 41
- 20
LOLO9393
Members
- Feb 8, 2016
- 3,227
- 322
For whose interested, another deep review:
https://www.notebookcheck.net/Xiaom...-Review-Large-Display-Low-Price.466109.0.html
Raised question about display source...
https://www.notebookcheck.net/Xiaom...-Review-Large-Display-Low-Price.466109.0.html
Raised question about display source...
kauw5164
Members
- Apr 10, 2018
- 41
- 20
Safety net pass 100%. No problem if you flash rom EU without magisk/root.
DRM still show L1.
I am a fan of MIUI since it was available for the Galaxy S3 years back. Thank you guys for providing us with these incredible custom ROMs!!
Well these days I switched to Xiaomi devices (Note 5, 8A, 9s recently) because I am used to MIUI that much.
I need to get back to stock dialer, and that´s the reason for me to flash this ROM.
My question: When flashing a custom ROM in recovery it was always recommended to wipe system/dalvic cache and factory reset the device.
I was reading at this forum somewhere that ist is NOT recommended to factory reset (???)
Is there a procedure to wipe the cache one should follow? Do I need to factory reset in recovery before flashing?
Thanks!
Well these days I switched to Xiaomi devices (Note 5, 8A, 9s recently) because I am used to MIUI that much.
I need to get back to stock dialer, and that´s the reason for me to flash this ROM.
My question: When flashing a custom ROM in recovery it was always recommended to wipe system/dalvic cache and factory reset the device.
I was reading at this forum somewhere that ist is NOT recommended to factory reset (???)
Is there a procedure to wipe the cache one should follow? Do I need to factory reset in recovery before flashing?
Thanks!
LOLO9393
Members
- Feb 8, 2016
- 3,227
- 322
In 2 words:
From stock rom to EU rom you need a format data in TWRP. And only this!
From EU stable to eu weekly you dirty flash. Not the reverse that needs format data.
Forget any other wipe or factory reset.
You are welcome
As far as i can tell i dont have tianma panel, so this means i can go on with the lrtwtp?
Also is it easy to change the labguage to english in twrp?
Στάλθηκε από το Redmi Note 9S μου χρησιμοποιώντας Tapatalk
Also is it easy to change the labguage to english in twrp?
Στάλθηκε από το Redmi Note 9S μου χρησιμοποιώντας Tapatalk
Ths for answer. One i ask is it I must flash eu 07 by script them twrp and 08 or i may istall right way 08 by twrp ?
LOLO9393
Members
- Feb 8, 2016
- 3,227
- 322
if you have twrp installed you can go directly to 11.08 without any wipe. and if you want Magisk install it from twrp advanced tab.
sz.hatef
Members
- Apr 9, 2019
- 122
- 30
My Stock Rom is Global version (not Chinese).
According to the first post, should I use first method? Or I need to flash a Chinese Stock Rom at first, then go ahead and use the first method described in First Post?
I mean which one should I do: (A or B?)
A: flash a Chinese stock Rom by MiFlash and then follow Steps to install xiaomi.eu ROM for first time from China ROM.
B. No need to do anything just following Steps to install xiaomi.eu ROM for first time from China ROM.
According to the first post, should I use first method? Or I need to flash a Chinese Stock Rom at first, then go ahead and use the first method described in First Post?
I mean which one should I do: (A or B?)
A: flash a Chinese stock Rom by MiFlash and then follow Steps to install xiaomi.eu ROM for first time from China ROM.
B. No need to do anything just following Steps to install xiaomi.eu ROM for first time from China ROM.
Similar threads
