HyperOS 1.0 HyperOS 1.0 STABLE RELEASE


Can someone who use redmi k60 pro (SOCRATES) share their opinion on the latest build (1.0.8), is there any problem with it?
And there's something I've noticed since using HyperOs. For example in WhatsApp, when you were to open a chat, there's a slight delay for the chat to open. Is it just on SOCRATES or does it happen across all devices using HyperOS? Thank you
 
PervizMikail said:
The other version of your device is Poco M6 Pro 4g (emerald). And Mediatek devices are not supported by xiaomi.eu
Click to expand...
If I avail the community funded rom for mediatek devices to get support for POCO M6 PRO 4G, is it okay to just pay the patreon every time there's a new release? Or do I need to pay every month even if there's no release?
 
POCO M6 Pro (4G) is not supported on Patreon either.
MediaTek Helio have no support at all. Only some models with Dimensity.
xiaomi.eu

Community-funded MediaTek Support

We have launched a community-funded initiative to support select MediaTek Dimensity devices. The details are in the "About" section of the Patreon page: https://www.patreon.com/xiaomieu/about
xiaomi.eu xiaomi.eu
 
qiddoz said:
Can someone who use redmi k60 pro (SOCRATES) share their opinion on the latest build (1.0.8), is there any problem with it?
And there's something I've noticed since using HyperOs. For example in WhatsApp, when you were to open a chat, there's a slight delay for the chat to open. Is it just on SOCRATES or does it happen across all devices using HyperOS? Thank you
Click to expand...
In my opinion, it is not as smooth as version 1.0.7.
 
Fraenkill said:
Installed latest stable (using fastboot method on Windows PC, freshly unlocked device) - now the Houji (Xiaomi 14) does not boot, it is stuck in fastboot mode. I tried flashing several times - always the same result. The CMD window is closed immediately, so that I cannot see any final message; the messages during flash are all confirmed with 'ok'.

Any advice from community or xiaomi.eu team members here?
Click to expand...
Xiaomi 14 now boots with stable ROM after flashing official, and then again Xiaomi.eu ROM. Thank you, guys!
 
Facing an issue with both stable and weekly ROM: no network ("no service") possible although SIM is fully accepted and correctly recognized. Tried various possible solutions - nothing works. When flashing back to official Xiaomi-ROM (EEA-ROM), "no service" message disappears, and network connection is being established.

My assumption: as I'm currently in roaming, something in ROM prevents establishing the network connection during setup when not in Home (of service provider) location.
Known issue?
Will try doing setup in Home location (not before end of April though), and feedback.
 
Here is the solution to your network problem.
If you have the Global version of the device:
xiaomi.eu

HyperOS 1.0 - 24.2.26

Problem with global units (EEA) persists. No service but now it shows de e-SIM option. Anyone with the same units with this problem? Yes (Xiaomi 14 Global - Germany)
xiaomi.eu xiaomi.eu
 
  • Like
Reactions: Fraenkill

Attachments

  • Screenshot_2024-04-13-17-59-23-789_com.miui.aod.jpg
    Screenshot_2024-04-13-17-59-23-789_com.miui.aod.jpg
    448.7 KB · Views: 162
Guys with 14U: had you also a bootloop after install (ofc first install bat), what to do now?
 
You are right. I didn't read properly, thought you were talking about XM14.

Then try to install official fastboot ROM with MiFlash and then again xiaomi.eu ROM.
 
  • Like
Reactions: katerpanne
I got a eu/global redmi note 13 pro 5g with miui 14.

Should I flash the latest firmware (firmware, not ROM) before flashing xiaomi.eu hyperos? If so, EU, GLOBAL or China?
 
gogocar62 said:
Here is the solution to your network problem.
If you have the Global version of the device:
xiaomi.eu

HyperOS 1.0 - 24.2.26

Problem with global units (EEA) persists. No service but now it shows de e-SIM option. Anyone with the same units with this problem? Yes (Xiaomi 14 Global - Germany)
xiaomi.eu xiaomi.eu
Click to expand...
Again, thanks to the Devs to provide the zip.
Question is, if the correct and working modem will be part of ROM updates soon.
Flashing the add. zipfile after each update is a bit off...
 
Hi, silly noob question, do I need to wipe coming from EU 14.0.23.4.17 to HypeOS Stable for my Haydn? It's already EU and it's upgrade, so I assume no wipe is needed?
 
Hi Devs, I need help. I flashed the HyperOs Stable version on a Redmi Note13 Pro 5G (Garnet) Device. Everything went fine, but it seems that the whole cellphone part is missed?! It says "No Service". Thus no mobile data and no cellphone calls possible. Did I miss something? I used the flash batch script with wipe data, because after unlocking data is wiped anyway ... Could somebody help me further...???
 
If you want to use xiaomi.eu ROM and catch the signal follow the instructions below:

Redmi Note 13 Pro 5G / POCO X6​


- Download this firmware Global > extract the zip. > firmware-update > modem.img > use this file


Install modem.img
fastboot command:

Code: 
fastboot flash modem modem.img
fastboot reboot

You can also install the modem in TWRP:
 

Attachments

  • modem.png
    modem.png
    286.8 KB · Views: 229
  • Like
Reactions: steberg, nerdy, WolframD and 2 others
Fraenkill said:
Again, thanks to the Devs to provide the zip.
Question is, if the correct and working modem will be part of ROM updates soon.
Flashing the add. zipfile after each update is a bit off...
Click to expand...
gogocar62 said:
It will not happen.
xiaomi.eu

HyperOS 1.0 - 24.3.4

It concerns the Global version of Xiaomi 14.
xiaomi.eu xiaomi.eu
Click to expand...
It's only "the correct and working modem" for the Global model of the device.
Like I said in the post gogocar62 linked, "there is no way to guarantee that the firmware from Global ROM will always be compatible with the Chinese ROM".
In fact, the Global firmware is already incompatible with the latest Weekly ROM, it makes the camera unusable.
 
You must log in or register to reply here.

Similar threads

ingbrzy
  • Sticky
HyperOS 2.0 HyperOS 2.0 STABLE RELEASE
Replies
266
Views
104K
HyperOS
Igor Eisberg
Igor Eisberg
ingbrzy
  • Locked
HyperOS 1.0 24.7.28 (Final)
Replies
292
Views
279K
HyperOS
Igor Eisberg
Igor Eisberg
ingbrzy
  • Locked
HyperOS 1.0 24.7.1
Replies
54
Views
42K
HyperOS
Mistery88
M
ingbrzy
  • Locked
HyperOS 1.0 24.7.22/25/26
Replies
51
Views
38K
HyperOS
Ahaba
A
ingbrzy
  • Locked
HyperOS 1.0 24.7.15/17
Replies
87
Views
44K
HyperOS
KGVER
KGVER
Top Bottom
Back