HyperOS 1.0 HyperOS 1.0 STABLE RELEASE


Alex_DeLarge said:
Hi, do you know or can you please check if this underclock still persist? Thanks
Click to expand...
Seems to top off way higher especially across all cores

Think this was back on my F5 though.

I've since gone to an F6 pro xD
 

Attachments

  • Screenshot_2024-11-08-10-50-20-376_flar2.devcheck.jpg
    Screenshot_2024-11-08-10-50-20-376_flar2.devcheck.jpg
    551.2 KB · Views: 229
  • Like
Reactions: Alex_DeLarge
I have an update on my stable rom and already downloaded the zip file, how to run update file using updater app? Or will i do the flash method using fastboot on my redmi note 13pro 5g garnet global? Please answer thank you
 

Attachments

  • Screenshot_2024-11-09-19-00-08-444_com.android.updater.jpg
    Screenshot_2024-11-09-19-00-08-444_com.android.updater.jpg
    174 KB · Views: 114
sevet said:
i just tried to upgrade a working Fuxi from xiaomi.eu_FUXI_OS1.0.14.0.UMCCNXM_14 to xiaomi.eu_FUXI_OS1.0.17.0.UMCCNXM_14
after it finished it didnt reboot, i have a black screen and when plugging i get this com port:

relink hs-usb qdloader 9008

what can be done? what happened?
Click to expand...
I just paid someone from telegram and he managed to fix my phone, it is now original and unlocked,
Did someone flash fuxi latest 1.0.17? Afraid to brick again,
Should i put the working 1.0.14 and skip 17?
 
sevet said:
I just paid someone from telegram and he managed to fix my phone, it is now original and unlocked,
Did someone flash fuxi latest 1.0.17? Afraid to brick again,
Should i put the working 1.0.14 and skip 17?
Click to expand...
Yes, I've updated my fuxi from 1.0.14 to 1.0.17 without any problem
 
sevet said:
I just paid someone from telegram and he managed to fix my phone, it is now original and unlocked,
Did someone flash fuxi latest 1.0.17? Afraid to brick again,
Should i put the working 1.0.14 and skip 17?
Click to expand...
Fuxi owner here (model 2211133G),
Upgraded directly from 1.0.13 to 1.0.17 and works fine.
 
  • Like
Reactions: sevet
Poco F3 Alioth on 1.0.6, as well as Peridot 1.0.16. Not sure if this a valid issue or not, im currently experience failure to make phone calls / receiving calls on a specific sim card / network operator, despite putting it on SIM1 on both phones. Swapping it to SIM2 rectifies this issue. Putting the same sim card to non xiaomi phone does work normally. Unsure if this is just me, but i can't exactly rule out what is going on. I have also did a clean flash on the alioth, and still does not work on SIM1.

if anyone else have some insight into this, appreciate it.
 
Experienced sudden app crashes on Sapphiren 1.0.8, had to get back to 1.0.6

It's okay, I guess it's better for budget devices to stay in a lower firmware version
 
Last edited:
austinjklim said:
Poco F3 Alioth on 1.0.6, as well as Peridot 1.0.16. Not sure if this a valid issue or not, im currently experience failure to make phone calls / receiving calls on a specific sim card / network operator, despite putting it on SIM1 on both phones. Swapping it to SIM2 rectifies this issue. Putting the same sim card to non xiaomi phone does work normally. Unsure if this is just me, but i can't exactly rule out what is going on. I have also did a clean flash on the alioth, and still does not work on SIM1.

if anyone else have some insight into this, appreciate it.
Click to expand...
Had the same problem in a different phone, a Poco X6 (Garnet). It was solved by flashing an older modem.img.
 
tzifosf1 said:
Had the same problem in a different phone, a Poco X6 (Garnet). It was solved by flashing an older modem.img.
Click to expand...
Thanks mate. I'll try looking up for guides on flashing modem.img, i only know that it's discussed for houji? but the steps should be the same im guessing. By the way, it would be okay if I flash the modem image from the latest global ROM to the latest current xiaomi.eu ROM yes? Dont think that should be a problem?
 
no it wouldn't be a problem. Make sure that you use the correct commands in FastBoot mode and that you flash modem.img for your phone. In my case the latest global modem.img didn't work properly, and used an older one that worked for me.
 
tzifosf1 said:
no it wouldn't be a problem. Make sure that you use the correct commands in FastBoot mode and that you flash modem.img for your phone. In my case the latest global modem.img didn't work properly, and used an older one that worked for me.
Click to expand...
unfortunately, i tried flashing 2 different modems for stable hyper OS, and 1 from MIUI14, and my issue with umobile carrier still presists. If inserted on SIM1, all outgoing/incoming calls would not work and an error "server error try again later" would come out. Swapping it to SIM2 though, everything works flawlessly. The con is that for some reason SIM1 seems to be sticking on B28 Band "most of the time", which allows me to get access to 5G, SIM2 however does not stick to B28 most of the time, probably due to 4G Aggregation?.

I try contacting the carrier, hopefully a solution would come out from this, but i kinda doubt it.

Edit: found tzifosf1 mentioned a similar? issue, but for a different device (X6). Honestly, I don't think i had this issue about a week ago, despite not updating anything firmware-wise. Not sure if it's just coincidence / a problem from my side / a problem from the ROM itself.
 
Last edited:
  • Like
Reactions: cyrion
I am using “xiaomi.eu_SOCRATES_OS1.0.24.7.28.DEV”. Can I upgrade to “xiaomi.eu_SOCRATES_OS1.0.13.0.UMKCNXM_14.zip” without data loss?
 
tzifosf1 said:
DEV to STABLE without format data?? :Ο that's something new!!!
Click to expand...
Yes, it was specifically done for the end of the DEV ROMs

xiaomi.eu

HyperOS 1.0 - 24.7.28 (Final)

Status: RELEASED RULES WHEN POSTING 1. If a ROM is not published DONT ASK ABOUT ITS ETA 2. If a ROM is not published DONT ASK why! 3. If a ROM is available, download it and use it 4. If a ROM has bugs, post the bug to the bug section if the BUG is not already listed 5. If you use any form of...
xiaomi.eu xiaomi.eu
 
  • Like
Reactions: tzifosf1
Since I updated to the latest version 1.0.17.0 on my Xiaomi 13, some applications do not receive notifications until I open them. The app's battery saver is disabled, all permissions granted, wifi saver disabled and the app is pinned with the lock in the background. Everything is the same as before updating but now this happens.
 
Question

I have stable hyperos rom, rooted via ksu
If i do the update using updater app my rooted device will also be deleted?
 

Attachments

  • Screenshot_2024-11-15-15-23-01-459_com.android.updater.jpg
    Screenshot_2024-11-15-15-23-01-459_com.android.updater.jpg
    180 KB · Views: 47
I update may Mi 12s pro to 1.0.11, my phone lost connection both wifi and 4G, please help me, thanks! It has sinal but dont connect to wifi or 4G.
 
You must log in or register to reply here.

Similar threads

ingbrzy
  • Sticky
HyperOS 2.0 HyperOS 2.0 STABLE RELEASE
Replies
277
Views
107K
HyperOS
c4rdix
C
ingbrzy
  • Locked
HyperOS 1.0 24.7.28 (Final)
Replies
292
Views
280K
HyperOS
Igor Eisberg
Igor Eisberg
ingbrzy
  • Locked
HyperOS 1.0 24.7.1
Replies
54
Views
42K
HyperOS
Mistery88
M
ingbrzy
  • Locked
HyperOS 1.0 24.7.22/25/26
Replies
51
Views
39K
HyperOS
Ahaba
A
ingbrzy
  • Locked
HyperOS 1.0 24.7.15/17
Replies
87
Views
44K
HyperOS
KGVER
KGVER
Top Bottom
Back