MiPAD is dead(brick)

Discussion in 'Xiaomi Mi Pad' started by nda12345, Jul 31, 2014.

  1. nda12345

    nda12345Members

    Jul 30, 2014
    14
    3
    13
    Male
    What to do?
    Device Manager:
    NVIDIA USB Boot-recovery driver for Mobile devices

    Nvflash started
    uid read failed

    on device flash red led.
    no recovery, no fastboot...black screen only.
    nothing I can do((((((((
     
  2. Jacketti

    JackettiMembers

    Mar 25, 2013
    88
    13
    18
    Male
    #2Jacketti,Aug 1, 2014
    Last edited: Aug 1, 2014
    Do you have any idea what caused this problem?

    Are you sure the battery is full? Try recharging it for a night.
     
  3. nda12345

    nda12345Members

    Jul 30, 2014
    14
    3
    13
    Male
    1. I changed the boot loader
    2.battery OK(on a full charge can't be turned off. on the black screen lit backlight to complete discharge.)
    he is not seen as a device on a full charge, disable it. visible only when discharged.
     
  4. Acid

    AcidScripting Ninja
    Staff Member

    Aug 20, 2011
    2,726
    743
    245
    Male
    You did what???
     
  5. Jacketti

    JackettiMembers

    Mar 25, 2013
    88
    13
    18
    Male
    Could you explain what you were trying to do? One does not simply change a bootloader
     
  6. redmaner

    redmanertranslators.xiaomi.eu maintainer
    Staff Member

    Jan 12, 2013
    533
    547
    180
    Male
    The Netherlands
    Did you update the bootloader to a newer version or did you replaced your bootloader by another one (not Xiaomi MiPad)?
    If the last one is the case there won't be no way to restore your MiPad without a JTAG.
     
  7. nda12345

    nda12345Members

    Jul 30, 2014
    14
    3
    13
    Male
    #7nda12345,Aug 1, 2014
    Last edited: Aug 1, 2014
    second....(
    and as you can dd if=bootloader.bin of=/dev/bus/1/usb/14 ???

    there are instructions for JTAG?
     
  8. redmaner

    redmanertranslators.xiaomi.eu maintainer
    Staff Member

    Jan 12, 2013
    533
    547
    180
    Male
    The Netherlands
    If you get any connection with your device dd could be working.
    JTAG is a device that can flash your device without a bootloader.
    The thing is that getting a JTAG is not easy, Xiaomi will probably use it if you send it for repair.
     
  9. nda12345

    nda12345Members

    Jul 30, 2014
    14
    3
    13
    Male
    #9nda12345,Aug 2, 2014
    Last edited: Aug 2, 2014
    any repair center where the JTAG have?
    will do nothing, have to bear in repair
     
  10. nda12345

    nda12345Members

    Jul 30, 2014
    14
    3
    13
    Male
    #10nda12345,Aug 2, 2014
    Last edited: Aug 2, 2014
    Where is the closest repair center Xiaomi that can unbrick? I live in Moscow, Russia. I can't find (who can unbrick)

    Or another option, which need JTAG?
    On eBay you can buy?

    Help please.
     

    Attached Files:

  11. Acid

    AcidScripting Ninja
    Staff Member

    Aug 20, 2011
    2,726
    743
    245
    Male
    Can you enlighten us why did even think about flashing bootloader? What for? And what tools and files did you use?

    Wysłane z mojego MI 4W
     
  12. Jeffrey van Zeijst

    May 17, 2014
    78
    5
    18
    What in the world did you do that for? Geez, this is a brand new device, one should never go modding past the level of the bootloader maybe unlocking it but thats about it! Anyway what was the purpose?
     
  13. Jeffrey van Zeijst

    May 17, 2014
    78
    5
    18
    #13Jeffrey van Zeijst,Aug 8, 2014
    Last edited: Aug 8, 2014
    Reflashing stock Rom with the miphone pc program doesnt work, i suppose!
    i use it a couple of time for flashing the mi3, not sure it works on mipad as well?
    Since your out of fastboot! i think it wont work! as this uses fastboot..

    this program:http://bigota.d.miui.com/tools/MiPhone2.11.6.exe

    here are the roms:
    http://www.miui.com/thread-1666183-1-1.html use a fastboot version
     
  14. nda12345

    nda12345Members

    Jul 30, 2014
    14
    3
    13
    Male
    I installed WSM Tools. it was possible to leave everything as usual(/system)...about you cwm something like this, I chose. it was a warning brick, after a reboot it stopped...to enter fastboot, recovery and invisible in the system until charged the battery, if you disable the battery it is seen as NVIDIA USB Boot-recovery driver for Mobile devices(a few seconds) miflash it sees and all 0000000.
     

    Attached Files:

  15. nda12345

    nda12345Members

    Jul 30, 2014
    14
    3
    13
    Male
    by accident, I thought that will be established clockworkmod recovery.
     
  16. nda12345

    nda12345Members

    Jul 30, 2014
    14
    3
    13
    Male
    I will try. Thank you. But not sure something will work out . never sets in fastboot mode. but miflash see it , the only cannot nothing to send, writes "device busy")
     
  17. nda12345

    nda12345Members

    Jul 30, 2014
    14
    3
    13
    Male
    that is something like
     

    Attached Files:

    • 1.jpg
      1.jpg
      File size:
      77.9 KB
      Views:
      229
    • 2.jpg
      2.jpg
      File size:
      48 KB
      Views:
      224
    • 3.jpg
      3.jpg
      File size:
      47.6 KB
      Views:
      208
    • 4.jpg
      4.jpg
      File size:
      50.9 KB
      Views:
      231
    • 5.png
      5.png
      File size:
      43.5 KB
      Views:
      208
  18. damhamaza

    damhamazaMembers

    Mar 12, 2011
    9
    0
    11
    Hurm, maybe similar to me. I tried the Miphone software. It did not recognise my mipad until i change to generic android driver and then it recognised by it cannot flash the rom to the mipad.

    What did i do is that boot to fastboot, extract all the fastboot version of the rom, and double click the flash.bat, and the rest..my mipad boot again.

    Try to change to generic usb driver if it help...
     
  19. nda12345

    nda12345Members

    Jul 30, 2014
    14
    3
    13
    Male
    I tried different....but if you have a different one driver, please give the link.((не заходит в(no fastboott))he even does not vibrate, when connecting, turn on, off.)
     
  20. Jeffrey van Zeijst

    May 17, 2014
    78
    5
    18
    #20Jeffrey van Zeijst,Aug 11, 2014
    Last edited: Aug 11, 2014
    try a samsung driver, they worked for my gaining fastboot acces to the oneplus one when going from coloros to cm11s! its not only compatible with samsungdevices!

    please uninstall old drivers first then reboot!im working on multiple phone flashes sometimes and every now and then my pc start to be unable to communicate to those! normally after a reboot needed drivers picks up and aprroch the phone as expected..it might be placebo effect!

    http://developer.samsung.com/androi...Dltp8YZqvfYvv6VVpq2CQnZ8kxJTGRFPrJ!1460294305


    im not sure anything will work as i start to believe you did kill the bootloader and its way to get into fastboot!
    im keeping my fingers crossed budy!
     
  21. damhamaza

    damhamazaMembers

    Mar 12, 2011
    9
    0
    11
    the main thing is now for you to be able to boot to fastboot. if that succeed, everything will be ok
     
  22. Jeffrey van Zeijst

    May 17, 2014
    78
    5
    18
    but if he screwed up the bootloader, hes gonna be out of luck i believe! too bad for messing up a great device..
     
  23. Damien Steenbrink

    Aug 12, 2014
    2
    0
    11
    Im in the same boat as the op. I tried installing Xposed (Now i know that isnt such a smart thing to do) and used the zip through recovery option. When it rebooted it to get into recovery, it got stuck on the XI logo and i had to force reboot it (Xposed didnt even get installed yet), but it only gave me a white screen afterwards (only backlight). Every button combination i tried resulted in a white screen without any response watsoever. I couldnt even put my mipad out, it just kept going to a white screen. So i waited until it was empty and then connected it to my pc. It saw my mipad as APX in my device manager and after installing it it is recognized as nvidia usb boot-recovery driver for mobile devices. The miphone flash tool can see the device, but the device is always busy. I can still recharge my mipad, however without access it is no use to waste charges and the only way to see my mipad is it being empty and connected.
     
  24. Jeffrey van Zeijst

    May 17, 2014
    78
    5
    18
    why you wanted xposed to work on it?
    i suppose holding volume down plus power doesn't react putting it into fastboot mode? keeping powerbutton for a good 15sec wouldnt switch it off as well?
     
  25. Damien Steenbrink

    Aug 12, 2014
    2
    0
    11
    I use Xposed on another android device for a few adjustments.
    I tried every combination, they all lead to the same result. For now im going to leave it uncharged and charge it again tomorrow and try if i can somehow get into fastboot, but seeing that i only get the white screen, i am afraid that it wont really have any effect to wait.
     

Share Our Site