MIUI 12.0 MIUI 12 STABLE RELEASE

[sfairmm]

It does not work.

The device is shown into adb devices.
The reboot command goes trough.
The guy with the hat comes on.
The flash recovery command does not go trough.

I disconnect the phone, long press the power button and the phone reboots into Android.

And the video of the procedure.

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

Sent from my Moto Z3 Play using Tapatalk

Do you use AMD Ryzen or is USB port v3.0?
If yes Ryzen, find fix on XDA. If is port 3.0 i dont know fix, i think on XDA you find too.

Good luck..

PS.
Make sure the bootloader is unlocked. If everything is fine, you can temporarily upload TWRP and install it after using the command below:

fastboot boot recovery_filename.img

Ref.
LineageOS Wiki

Or try enter on fastboot by butons...

 

[DTTR76]

Intel 10th Gen.
And yes USB 3.0
I'll try first the Qualcomm drivers posted above.

Sent from my Moto Z3 Play using Tapatalk

 

[DTTR76]

Glad you know now.
Just install (and maybe reboot your PC)
And try d fastboot commands again

so.
NOPE
i installed the Qualcomm drivers.
rebooted the laptop.
i get stuck at <waiting for any device>

i changed the USB 3 port with the USB C
i can see the phone on adb devices
i can send the reboot to bootloader command
the bootloader starts (the guy with the hat)

if i give the flash command... nothing.
if i give the command mentioned above fatboot boot twrp.img... nothing....

so no luck.

i shall try my wifes laptop. an older one with USB 2

 

[DTTR76]

The same on my wife's laptop.
I've tried 2 cables. The original MiMix3 one. And another one.


Sent from my Moto Z3 Play using Tapatalk

 

[Xxxsavage]

When the note 9 pro global will get android 11?
And plz add more mi apps like shareme and mi remote and if u can always on display support for note 9 pro

 

[biscoot]

When the note 9 pro global will get android 11?
And plz add more mi apps like shareme and mi remote and if u can always on display support for note 9 pro

when its available of course

 

[Xxxsavage]

when its available of course

Ok thnx

 

[IrishKevin]

When the note 9 pro global will get android 11?
And plz add more mi apps like shareme and mi remote and if u can always on display support for note 9 pro

Note 9 Pro has an IPS screen so will never get always on display, that's for OLED/AMOLED screens only.

 

[Xxxsavage]

Note 9 Pro has an IPS screen so will never get always on display, that's for OLED/AMOLED screens only.

Thnx bro what about the other apps n the upgrade to android 11 when it will be available

 

[DTTR76]

so... it does not work
i've installed the qualcomm drivers
i've installed xiaomi drivers (with a RED warning upon installing)
the phone is visible in device manager

the pone is visible on fastboot devices command

but as i give th flash command... i get this error

 

[DTTR76]

An image of the screen with the "small small letters" will be good

the small small small letters say "any key to shutdown". it is imposible to make a photo.

and my final try was...

 

[Poney70]

...
but as i give th flash command... i get this error

Use USB 2.0 port. If you don't have any USB 2.0 port on your computer, buy and use a "USB 2.0 hub".

 

[IrishKevin]

Thnx bro what about the other apps n the upgrade to android 11 when it will be available

RULES WHEN POSTING
1. If a ROM is not published DONT ASK ABOUT ITS ETA
2. If a ROM is not published DONT ASK why!

You should really read the rules. Anyway, a quick browse on the net shows only the Indian ROM for Note 9S/Note 9 Pro (curtana) has Android 11. You just have to be patient and hope Xiaomi sends out an update for the other regions for the team here to work with. Have no answer for the apps.

 

[DTTR76]

Use USB 2.0 port. If you don't have any USB 2.0 port on your computer, buy and use a "USB 2.0 hub".

I'll give that a go!
But I switched to usb 3 a long time ago.
I gave all my hubs to family members, 250 kms away.

Sent from my Moto Z3 Play using Tapatalk

 

[DTTR76]

Use USB 2.0 port. If you don't have any USB 2.0 port on your computer, buy and use a "USB 2.0 hub".

progress.

it turns out that my current USB-C hub has 2 - USB 3 ports, - 2 - USB 2 PORTS, one USB-C port and wireless charging.

now how do i make it STICK?

i managed to boot into recovey.

will it STICK? or after i flash de xaiomi.eu ROM i have to repeat the procedure for installing TWRP?

 

[Poney70]

progress.

it turns out that my current USB-C hub has 2 - USB 3 ports, - 2 - USB 2 PORTS, one USB-C port and wireless charging.

now how do i make it STICK?

i managed to boot into recovey.

will it STICK? or after i flash de xaiomi.eu ROM i have to repeat the procedure for installing TWRP?

It "stick" if you install xiaomi.eu ROM, yes.

 

[DTTR76]

i did...
i configured it without the Google Services (no Google account provided yet)
first impresions comparing it to the Global...
to much chinese content in the Themes Store.
unable to download themes without logging into some kind of an account.
i'll give it a few days (and side-install my apps for video editing) to see how it runs.

 

[xcraft02]

Hi.. Thank you very much for this wonderful ROM.. My RN8 has never been more responsive.. Although I have a problem with getting root.

I came from a Locked Bootloader and so far everything is great until I decided to root it.

I can't flash Magisk 17.0 returning an error:
! Boot image patched by unsupported programs
! Please restore stock boot image

Should I rooted first before flashing the ROM? How do I go about this?

 

[Poney70]

Hi.. Thank you very much for this wonderful ROM.. My RN8 has never been more responsive.. Although I have a problem with getting root.

I came from a Locked Bootloader and so far everything is great until I decided to root it.

I can't flash Magisk 17.0 returning an error:
! Boot image patched by unsupported programs
! Please restore stock boot image

Should I rooted first before flashing the ROM? How do I go about this?

Hello,

Please install latest Magisk version.

Latest Stable is 20.4 (for Android 10 and below) =>

https://github.com/topjohnwu/Magisk/releases/download/v20.4/Magisk-v20.4.zip

 

[xcraft02]

Hello,

Please install latest Magisk version.

Latest Stable is 20.4 (for Android 10 and below) =>

https://github.com/topjohnwu/Magisk/releases/download/v20.4/Magisk-v20.4.zip

Thank you. It went thru but, why is this so different lol..

I had my wife's Redmi 5 Plus installed with MIUI 11 EU ROM and rooted with Magisk.. All banking apps works on her phone..

Why in mine, nothing works? I already hid Magisk..

Update: My bad, I forgot to actually select the banking apps to hide Magisk from.

Only one app is not working but I guess Magisk can't do anything about it.

Update 2: So it's the app. It accesses Internal Memory and look for "TWRP" folder. Just have to delete it.

 

[Nikira]

Hi guys,
I wanted to install a custom ROM (xiaomi.eu stable) on my Mi 10T lite, but I can't find TWRP for him. Is there another way to install it? Thank you in advance.

 

[Ivyn87]

Hi guys,
I wanted to install a custom ROM (xiaomi.eu stable) on my Mi Note 10T lite, but I can't find TWRP for him. Is there another way to install it? Thank you in advance.

I know Mi 10 T Lite, Mi Note 10, or Mi Note 10 Lite... no Mi Note 10T Lite..

 

[Nikira]

I know Mi 10 T Lite, Mi Note 10, or Mi Note 10 Lite... no Mi Note 10T Lite..

So sorry - Mi 10t Lite

 

[DraganK]

Hi everyone, I went to both sourceforge and androidfilehost links and could not a find the stable ROM for the MI6, any help would be appreciated, thank you.

edit: Just saw that someone answered that MIUI 12 is not supported for MI6.

 

[Ivyn87]

So sorry - Mi 10t Lite

I search but no twrp or eu rom for Mi 10T Lite, i'm sorry