MIUI 12.0 MIUI 12 STABLE RELEASE


Do you like this MIUI version?

  • Total voters
    4,215
Status
Not open for further replies.
GuitarJJ said:
Latest ROM is working fine on my new Mi 10!

It was a little bit of a puzzle to get everything working, because of the bootloops etc. What I did:
1. Unlock phone with MiFlash unlock tool.
2. Install stock ROM through fastboot with MiFlash tool.
3. Install TWRP (version 3.4.2B-0623) through fastboot.
4. Format data through TWRP.
5. Install latest xiaomi.eu stable ROM with TWRP.
6. Install Magisk_11 (see download in this thread) with TWRP.
7. Install Magisk v21 (see download in this thread) with TWRP.

Thanks for all the tips and support in this thread! :)
Click to expand...

try with dual apps, facebook :)
 
GuitarJJ said:
Latest ROM is working fine on my new Mi 10!

It was a little bit of a puzzle to get everything working, because of the bootloops etc. What I did:
1. Unlock phone with MiFlash unlock tool.
2. Install stock ROM through fastboot with MiFlash tool.
3. Install TWRP (version 3.4.2B-0623) through fastboot.
4. Format data through TWRP.
5. Install latest xiaomi.eu stable ROM with TWRP.
6. Install Magisk_11 (see download in this thread) with TWRP.
7. Install Magisk v21 (see download in this thread) with TWRP.

Thanks for all the tips and support in this thread! :)
Click to expand...
Did you install Magisk_v21.0 or Magisk_v21.1? :)
 
Just updated my Mi10 to 12.2.2.0. Everything works fine, only one issue still exist for me:
photo_2020-11-15_01-35-08.jpg
Does someone know how to fix it? It's because Dark Mode is on.
 
  • Like
Reactions: Donnyjohnny
Hey guys, with my 10 I am in the weekly 20.10.30, is it possible to go to the stable EU in a traditional way? twrp from mobile and flash ROM by otg? thanks!

Enviado desde mi Mi 10 mediante Tapatalk
 
jesuslinuesa said:
thanks for the reply! because going from 20.10.30 to 20.11.12 is not possible by this same method, right? twrp+flash otg?

Enviado desde mi Mi 10 mediante Tapatalk
Click to expand...
i think its possible if you can boot to TWRP and using OTG to update its will work , if you go from weekly to stable you need format data but if you update weekly it will work
 
system storage umi_eea_global_images_V12.0.6.0.QJBEUXM
Df01icv.jpg

system storage eu_multi_MI10_V12.2.2.0.RJBCNXM_v12-11.zip
CcAXDYA.jpg
 
I just updated my Mi10 to 12.2.2.0. and I can confirm that:

1) fastboot boot into recovery works although I cannot decrypt data using my PIN (is that normal?)
2) I didn't try to boot into the flashed recovery, I'm afraid after what I read here
3) newest Magisk works (using the image patching method; see Magisk's github for installation details - no twrp necessary)
4) Viper4Android works
5) SafetyNet passes after changing the device fingerprint and forcing BASIC evaluation (search HidePropsConfig for more info)
6) GPay works after applying some SQL Magisk script (I don't understand the details, just followed an XDA tutorial - https://forum.xda-developers.com/ap...7-1-22-pie-t3929950/post79643248#post79643248)

Everything seems to be working fine for me except two strange things with facebook messenger that are really frustrating:
1) it doesn't show messenger notifications on Always On Display, I have to turn on the screen and only then they show up
2) unread messages ARE NOT in bold font so I cannot see which are new after entering the app

I tried clearing the cache & data and reinstalling the Messenger twice, it didn't help. Tried changing the system font, size and weight - didn't help.
If you have encountered these problems, PLEASE tell me what to do, this is really frustrating as it is my main communicator to talk to people and it makes it very difficult.

Regards,
Chris
 
krzylew said:
I just updated my Mi10 to 12.2.2.0. and I can confirm that:

1) fastboot boot into recovery works although I cannot decrypt data using my PIN (is that normal?)
2) I didn't try to boot into the flashed recovery, I'm afraid after what I read here
3) newest Magisk works (using the image patching method; see Magisk's github for installation details - no twrp necessary)
4) Viper4Android works
5) SafetyNet passes after changing the device fingerprint and forcing BASIC evaluation (search HidePropsConfig for more info)
6) GPay works after applying some SQL Magisk script (I don't understand the details, just followed an XDA tutorial - https://forum.xda-developers.com/ap...7-1-22-pie-t3929950/post79643248#post79643248)

Everything seems to be working fine for me except two strange things with facebook messenger that are really frustrating:
1) it doesn't show messenger notifications on Always On Display, I have to turn on the screen and only then they show up
2) unread messages ARE NOT in bold font so I cannot see which are new after entering the app

I tried clearing the cache & data and reinstalling the Messenger twice, it didn't help. Tried changing the system font, size and weight - didn't help.
If you have encountered these problems, PLEASE tell me what to do, this is really frustrating as it is my main communicator to talk to people and it makes it very difficult.

Regards,
Chris
Click to expand...
Sorry but which device fingerprint did you pick from the list in props? Cause i didn't understand which one i've to choose (i've also have Mi 10 with 12.2.2.0) Thanks
 
ricky94.v said:
Sorry but which device fingerprint did you pick from the list in props? Cause i didn't understand which one i've to choose (i've also have Mi 10 with 12.2.2.0) Thanks
Click to expand...
I remember there was only one option with Android 11, I think you had to choose Mi 10 Global version at first.
 
Hi! I'm currently on 12.0.4. stable.
The current version shown in the updater is 12.2.2.0. I am thinking about updating to this version.

But as i know from previous attempts to update, there might be some problems, if i don't run format data or full wipe. on the other hand, there are apparently some problems with twrp and the mi10.

so before i proceed:
what do you suggest? is it possible to make a simple upgrade from 12.0.4 to 12.2.2.0 without any loss of data?
 
I'm on last A10 weekly and not planning to switch to A11 weekly. Is it beneficial for me to switch to latest stable as it is newer than the weekly?

Thanks

Device: Mi 9T
 
leon834 said:
Hi! I'm currently on 12.0.4. stable.
The current version shown in the updater is 12.2.2.0. I am thinking about updating to this version.

But as i know from previous attempts to update, there might be some problems, if i don't run format data or full wipe. on the other hand, there are apparently some problems with twrp and the mi10.

so before i proceed:
what do you suggest? is it possible to make a simple upgrade from 12.0.4 to 12.2.2.0 without any loss of data?
Click to expand...
no, it is not possible to do a simple upgrade. You have to format data
 
mrumais said:
I'm on last A10 weekly and not planning to switch to A11 weekly. Is it beneficial for me to switch to latest stable as it is newer than the weekly?

Thanks

Device: Mi 9T
Click to expand...

I don't think so, you would need to format data to go from weekly to stable. The weekly release will be newer next week :)
 
leon834 said:
Hi! I'm currently on 12.0.4. stable.
The current version shown in the updater is 12.2.2.0. I am thinking about updating to this version.

But as i know from previous attempts to update, there might be some problems, if i don't run format data or full wipe. on the other hand, there are apparently some problems with twrp and the mi10.

so before i proceed:
what do you suggest? is it possible to make a simple upgrade from 12.0.4 to 12.2.2.0 without any loss of data?
Click to expand...
your version is Android 10 and 12.2.2.0 is A11. you could try to dirty flash the 12.0.8.0 which we the last A10 stable release, don't forget to backup tho. I'd it works for you I'd recommend sticking to it, the A11 releases have recovery issues.
 
Guys, is it possible to downgrade from 12.2.2.0 to 12.1.5.0 with a dirty flash? On top of the messenger issues I realised that Viper 4Android is broken, not to mention the recovery problems. I regret taking this update a lot.
 
krzylew said:
Guys, is it possible to downgrade from 12.2.2.0 to 12.1.5.0 with a dirty flash? On top of the messenger issues I realised that Viper 4Android is broken, not to mention the recovery problems. I regret taking this update a lot.
Click to expand...
No, it is not possible with a dirty flash. I also do not understand why you like to install Viper4Android. The sound of Mi 10 speakers is great and for headset you can use a music player with integrated equalizer, for example poweramp
 
  • Like
Reactions: krzylew
krzylew said:
Guys, is it possible to downgrade from 12.2.2.0 to 12.1.5.0 with a dirty flash? On top of the messenger issues I realised that Viper 4Android is broken, not to mention the recovery problems. I regret taking this update a lot.
Click to expand...
no,, downgrade need format data
 
  • Like
Reactions: krzylew
krzylew said:
Guys, is it possible to downgrade from 12.2.2.0 to 12.1.5.0 with a dirty flash? On top of the messenger issues I realised that Viper 4Android is broken, not to mention the recovery problems. I regret taking this update a lot.
Click to expand...
If you have a twrp backup of your previous installation (data and system) you can restore.
Else you have to format data and flash 12.1 5.0 as it is a downgrade

EDIT: @Sylar82 and @schand99 we all answered at same time but each with valuable info :)
 
  • Like
Reactions: Poney70, Sylar82 and krzylew
Status
Not open for further replies.

Similar threads

ingbrzy
  • Sticky
HyperOS 2.0 HyperOS 2.0 STABLE RELEASE
Replies
276
Views
106K
HyperOS
PervizMikail
PervizMikail
ingbrzy
  • Locked
HyperOS 1.0 24.7.8/12
Replies
50
Views
33K
HyperOS
emre_66
E
ingbrzy
  • Locked
HyperOS 1.0 24.7.28 (Final)
Replies
292
Views
280K
HyperOS
Igor Eisberg
Igor Eisberg
ingbrzy
  • Locked
HyperOS 1.0 24.7.22/25/26
Replies
51
Views
39K
HyperOS
Ahaba
A
ingbrzy
  • Locked
HyperOS 1.0 24.7.1
Replies
54
Views
42K
HyperOS
Mistery88
M
Top Bottom
Back