MIUI 12.0 MIUI 12 STABLE RELEASE


Do you like this MIUI version?

  • Total voters
    4,215
Status
Not open for further replies.
Igor Eisberg said:
Should be, can't test myself...
Click to expand...
36757


may i know how to solve this problem?i cant mount the storage... and cant copy the zip to the storage, why didt show the storage ?
 
keonggor97 said:
may i know how to solve this problem?i cant mount the storage... and cant copy the zip to the storage, why didt show the storage ?
Click to expand...
That's from TWRP or phone's system?

- If TWRP => Reboot to Recovery again... or try another TWRP version. ;)

- If phone's system => You have to allow transfert files on your device via USB (check phone's notifications) or, if you can't allow it, try with another USB cable.

:)
 
Hey guys, I tried to flash 12.5 Stable on my Mi 10T Pro, which was running on 12.0.11.0 Global, unlocked bootloader and rooted with magisk. I booted up to TWRP, transferred the rom to my device, flashed it, formatted my data after that. I did showed Redmi on the boot up, but it went back to TWRP. Need help ASAP. Thanks in advance.
 
MahathirMohamad_ said:
Hey guys, I tried to flash 12.5 Stable on my Mi 10T Pro, which was running on 12.0.11.0 Global, unlocked bootloader and rooted with magisk. I booted up to TWRP, transferred the rom to my device, flashed it, formatted my data after that. I did showed Redmi on the boot up, but it went back to TWRP. Need help ASAP. Thanks in advance.
Click to expand...
Try again in this order
1. Format data
2. Transfer rom to phone ( if you dont see rom reboot to recovery)
3. Flash rom
4. Reboot
 
MahathirMohamad_ said:
Hey guys, I tried to flash 12.5 Stable on my Mi 10T Pro, which was running on 12.0.11.0 Global, unlocked bootloader and rooted with magisk. I booted up to TWRP, transferred the rom to my device, flashed it, formatted my data after that. I did showed Redmi on the boot up, but it went back to TWRP. Need help ASAP. Thanks in advance.
Click to expand...
Hello, what TWRP did you install? You should try with this TWRP => https://androidfilehost.com/?fid=2188818919693766094

;)
 
shlyify said:
Try again in this order
1. Format data
2. Transfer rom to phone ( if you dont see rom reboot to recovery)
3. Flash rom
4. Reboot
Click to expand...
When I format data, there's a red writing

" Android Rescue Party trigger! Possible solutions? Either:
1. Wipe caches, and/or
2. Format data, and or
3. Clean-flash your ROM.

The reported problem is:
'--reason=fs_mgr_mount_all'

E:Unable to decrypt FBE device "

Is this normal?
 
MahathirMohamad_ said:
Yeah I used that twrp, but it booted up back to twrp.
Click to expand...
Confirm you are using the "Format Data" button (and not the wipe /data option)?

What you can try is these following steps:

1) Boot your device in "Fastboot" mode and flash this TWRP version => TWRP-3.4.2B-1206-apollo-DX.img

2) Boot to TWRP (Hold " Vol + " and " Power " buttons simultaneously)

3) Go in "Wipe" menu => "Format Data" button => Type "yes" to confirm it

4) Go back in main TWRP menu and redo step 3) 4 times (5 times in total)

5) Reflash the ROM you want in this TWRP. If you can't transfert ROM file on your phone, go in "Reboot" menu => "Recovery" then try again.

6) After that, reboot your phone and it should be good. :)

P.S.: If all is good, you can flash twrp-3.5.1.A10-apollo-geoanto555.img again and use it to install ROM updates.

;)
 
Nightquaker said:
So it is actually possible to only use Fastboot without TWRP, right? That's what I was curious about.
Are there any issues I should be prepared for with that method of installation?
I never used pure Fastboot install method before, since I straight up just went the TWRP/Orange Fox way, so I just want to make sure.
Click to expand...
Yes, correct.

I didn't face any issues but I don't flash from Windows. Just be sure you read the howto flash guide for your device, use good USB cables, also try using USB2 ports on Windows, and you are good.
 
Poney70 said:
should pass SafetyNet/Google certification
Click to expand...
I do not agree... ;)
Just installed Mi 11 ROM 12.5.7. SafetyNet Passed, but Google Pay screams "Your device is not safe". Payements are unable...

[EDIT]
To be precise, all ROMs till now were OK...
 
Last edited:
Poney70 said:
Nothing to do, all recent Xiaomi.eu ROMs (released after January 12, 2021) should pass SafetyNet/Google certification. ;)

Please indicate your device and ROM version if you willing for help. :)
Click to expand...

I installed xiaomi.eu 12.0.3 | Stable on MI10T Lite and received the message "This device isn't Paly Protect certified".

I came from Pixel Experience and formatted after installed xiaomi.eu.

Thanks for your help
 
mrosi said:
I do not agree... ;)
Just installed Mi 11 ROM 12.5.7. SafetyNet Passed, but Google Pay screams "Your device is not safe". Payements are unable...
Click to expand...
Did you try to clear "All data" of Google Pay app, in phone's settings?
 
Poney70 said:
Did you try to clear "All data" of Google Pay app, in phone's settings?
Click to expand...
Yes. I don't know why all cards are in GP after cleanning all app data, even after device restart.

Interesting...
Device is certified at Play Protect...
 
Mrboombastixx said:
How is your 12.5.7 is google certified? Mine still failing safetynet.
Click to expand...
Don't ask. Certified for Google Play, not safe for Google Pay.
Strange things...

[EDIT]
OK. I have made clean installation 12.5.7.0 ROM. "Your device is not safe"...
 
Last edited:
Status
Not open for further replies.

Similar threads

ingbrzy
  • Sticky
HyperOS 2.0 HyperOS 2.0 STABLE RELEASE
Replies
281
Views
109K
HyperOS
katerpanne
katerpanne
ingbrzy
  • Locked
HyperOS 1.0 24.7.8/12
Replies
50
Views
33K
HyperOS
emre_66
E
ingbrzy
  • Locked
HyperOS 1.0 24.7.28 (Final)
Replies
292
Views
280K
HyperOS
Igor Eisberg
Igor Eisberg
ingbrzy
  • Locked
HyperOS 1.0 24.7.22/25/26
Replies
51
Views
39K
HyperOS
Ahaba
A
ingbrzy
  • Locked
HyperOS 1.0 24.7.1
Replies
54
Views
42K
HyperOS
Mistery88
M
Top Bottom
Back