MIUI 13 MIUI 13 STABLE RELEASE


Status
Not open for further replies.
I tried to update my mi 11 with fastboot file. First time it worked but then impossible to use the touchscreen. Then i updated a second time. It blocked to Fastboot... then i tried a third time and it finally worked.
But now i have a bad battery and it got hotter faster
 
Ok, I updated via fastboot from 12.5.20 on the Mi 11 Ultra and at first it seemed stable...

Then randomly this morning after getting in the car it started restarting at different intervals, with no clear cause or pattern. When I placed the phone on the car wireless charging pad it immediately restartee, or if I plugee it into the car usb for connection it also restarted.

If then tried to leave it beside me on the seat with Bluetooth off, it could be ok for 30mins, 1 hr then it restarts again with no contact.
 
Not a noob question at all. The most "common" one is actually something called OTA, just like what updates look like when you're using global or Chinese or any other "official" MIUI, but this is not an option for Xiaomi.eu, so you don't need to worry about this. For Xiaomi.eu, when things become more stable, it tends to use recovery since it is easier. But when things just get started, like MIUI 13, the most "original" and the most "stable" is fastboot.
Thank you for the knowledge brother! I'm starting to love my android device, after being an iOS user for years specially after discovering the xiaomi.eu rom and the friendly community
 
Hi! Is it possible to set a constant screen frequency of 120 Hz in your firmware, for 11T pro? (no dynamic change 60-120Hz)
Thanks)
 
Go MIUI, enter MIUI and even so xiaomi still does not solve the problem that it is not possible to stop an alarm with the screen unlocked and also the problem of the proximity sensor.
 
Permissions drains battery on mi 11, tried clear app data and cache , cleared cache and dalvik from recovery, still the same
 

Attachments

  • Screenshot_2022-01-11-20-29-17-222_com.miui.securitycenter.jpg
    Screenshot_2022-01-11-20-29-17-222_com.miui.securitycenter.jpg
    401.3 KB · Views: 213
Last edited by a moderator:
  • Like
Reactions: Ryan_b936
Permissions drains battery on mi 11, tried clear app data and cache , cleared cache and dalvik from recovery, still the same
The battery usage on mine improved a lot from the third day after installing MIUI 13. I did this permissions procedure too and it didn't help much. It's really patience, so much so that now my battery is even better than on MIUI 12.5.
 
I installed the weekly version but find it a bit cumbersome and slow.
I want to install to test the stable version, but here I have a problem, when I open the CMD it closes immediately.

PS: It is not a driver problem, since the weekly version recognizes it perfectly as well as the CMD FASTBOOT devices.
Any solution?
 
Go MIUI, enter MIUI and even so xiaomi still does not solve the problem that it is not possible to stop an alarm with the screen unlocked and also the problem of the proximity sensor.
Proximity isues are likely due to the virtual proximity sensor (if your model is equipped with) - unfortunately, saving on the material bill
 
  • Sad
Reactions: samirglima
Bug with Franco Kernel: even though I set it to autostart (with settings) and set on boot to underclock GPU e CPU (on the app), I still have to redo the last one whenever I restart.
 
Hello. I have mi 11 pro.
When i try to install the miui 13, returns the error attached.
Anyone can help me?
I follow all the steps.
Thanks
 

Attachments

  • IMG_20220111_220935.jpg
    1.2 MB · Views: 167
Hello. I have mi 11 pro.
When i try to install the miui 13, returns the error attached.
Anyone can help me?
I follow all the steps.
Thanks
Updating to MIUI 13 with Android 12 is not done in TWRP.
You must perform this update in the fastboot method.

Installation of A12 devices via Fastboot:
- Download our ROM zip file
- Unpack downloaded zip file in the PC
- Reboot your device to fastboot mode (press volume down + power)
- Connect to PC via USB cable
- Run fastboot installation script from unpacked zip according your PC operating system
- Wait until the phone restarts itself.

--- For Windows OS - windows_fastboot_update_rom.bat
--- For Linux - linux_fastboot_update_rom.sh
--- For MacOS - macos_fastboot_update_rom.sh
 
If anyone wants the anti flicker option in setting, then all u have to do is type *#*#3223#*#* and it will appear in the display section of settings. For alioth
 

Attachments

  • Screenshot_2022-01-12-00-10-16-022_com.xiaomi.misettings.jpg
    Screenshot_2022-01-12-00-10-16-022_com.xiaomi.misettings.jpg
    193.4 KB · Views: 261
  • Screenshot_2022-01-12-00-10-13-636_com.android.settings.jpg
    Screenshot_2022-01-12-00-10-13-636_com.android.settings.jpg
    305.9 KB · Views: 259
Updating to MIUI 13 with Android 12 is not done in TWRP.
You must perform this update in the fastboot method.

Installation of A12 devices via Fastboot:
- Download our ROM zip file
- Unpack downloaded zip file in the PC
- Reboot your device to fastboot mode (press volume down + power)
- Connect to PC via USB cable
- Run fastboot installation script from unpacked zip according your PC operating system
- Wait until the phone restarts itself.

--- For Windows OS - windows_fastboot_update_rom.bat
--- For Linux - linux_fastboot_update_rom.sh
--- For MacOS - macos_fastboot_update_rom.sh
I did that. Everything goes smoothly but i get sent to MIUI Recovery 5.0.

Update: I wiped my data in that recovery menu and it worked. I would get stuck on reboot loop and recovery menu. I don't mind losing my data but to anyone who does careful. I hope no one goes through this haha.
 
Last edited:
Mi 11 Finger scan to login app not work ( Banking apps etc. )

When enable function fingerprint in banking app.

Close app and open app again function fingerprint is stay disable.

How can i fix this problem ?
 
Currently using Mi9 - 12.5.6.0, (Latest MIUI.eu stable)
I had already backed up all my files,
After the MIUI13 stable had published, any best solution for me to perform clean flash? As i think my rom has full of UI rubbish, and it might affect performance.
 
Currently using Mi9 - 12.5.6.0, (Latest MIUI.eu stable)
I had already backed up all my files,
After the MIUI13 stable had published, any best solution for me to perform clean flash? As i think my rom has full of UI rubbish, and it might affect performance.
no stable rom for mi9 yet
 
Hi everyone. I've updated my Xiaomi mi 11 pro (mars) from 12.5.20 to the 13.0.5, looks ok, a lot thanks for dev team, amazing work! Because I had a troubles with local banking app when I was on 12.5, now its fixed with new rom.

Comments on 13.0.5 stable:
1) frequently shown video recording icon at the top of the screen, but I am not actually launched recording, looks like a bug (screenshot attached);
2) on 12.5 there was search panel by swipe up on the home screen, now it's disappeared. How can I search apps for example, on the device?
3) could you please pin to the first post step by step instruction of ROM update if the file type is "recovery". Does it mean that I just need to install via twrp without data wipe? Or how? I can be mistaken, maybe just pin the link for the instruction, because I am afraid to lose data. P.s. I understood how to update if the file type is "fastboot", but sometimes roms are "recovery" and it is confusing.
 

Attachments

  • IMG_20220112_104359.jpg
    IMG_20220112_104359.jpg
    680.3 KB · Views: 218
Last edited:
Hi everyone. I've updated my Xiaomi mi 11 pro (mars) from 12.5.20 to the 13.0.5, looks ok, a lot thanks for dev team, amazing work! Because I had a troubles with local banking app when I was on 12.5, now its fixed with new rom.

Comments on 13.0.5 stable:
1) frequently shown video recording icon on the top of the screen, but I am not actually launched recording, looks like a bug (screenshot attached);
2) on 12.5 there was search panel by swipe up on the home screen, now it's disappeared. How can I search apps for example, on the device?
3) could you please pin to the first post step by step instruction of ROM update if the file type is "recovery". Does it mean that I just need to install via twrp without data wipe? Or how? I can be mistaken, maybe just pin the link for the instruction, because I am afraid to loose data. P.s. I understood how to update if file type is fastboot, but sometimes roms are recovery and it is confusing.
1) Do you use facial unlock ? It may explain why you have this behaviour

2) I saw the suggestion to enable the app drawer (I don't have an A12 device, on A11 it is Parameters > Home screen > Home screen > With App drawer), it has an app search.

3)Yes, you just install via TWRP without wipe. It is explained in the "Installation via TWRP" part of the first post : https://xiaomi.eu/community/threads/miui-13-stable-release.64441/
 
Just update my Mi 11 Lite. But why does it feel like there is no difference in the looks? Like, I dont have the new widgets, or the new control center, that kind of stuff that has been show as new features of this version. Is it because the xiaomi.eu doesnt include them or is it specific to my device version?
 
  • Like
Reactions: samirglima
installed 13.0.2.0 stable on my f3, it seems it works normal, but after update i do not get facebook messenger notification sound when screen is locked. messenger is in autostart, locked in recents, allowed all permissions, battery saver - no restrictions. if screen is unlocked i get the sound notification, but when screen is locked i do not. app reinstall does not solve this problem. any suggestions?
 
Last edited:
Status
Not open for further replies.

Similar threads