MIUI 14 MIUI 14 STABLE RELEASE


Status
Not open for further replies.
Just flashed latest firmware on F3.

Did as per below and able to pay via NFC on Google wallet.

Thanks for the guide. Thanks to the Xiaomi.EU team as well for this. Thanks to the Kacper on the Magisk PIF thread as well.

Cleared data on google play store, and rebooted after.

While the "doesn't meet security requirements" do pop out with Google wallet, just ignore it you can pay ahead via NFC.


Screenshot_2023-12-07-19-00-58-434_com.android.vending.jpg
Screenshot_2023-12-07-19-14-33-405_com.google.android.gms.jpg

I have done all the steps and it works perfectly. I leave a small tutorial for people who do not fully understand how to do it, so you can do it without fear.
My device is a Xiaomi 12, but it should work with any other phone that has MIUI 14 ROM from xiaomi.eu.

IMPORTANT: This method is only valid for the Stable ROM.

First step: Back up the data on the device and transfer it to a computer. (Not mandatory, but recommended).
Settings → My device → Backup and restore → Mobile device → (Select what you are interested in) Back it up.
It will take a long time depending on what you have in storage, if you see that the number does not change or has stopped suddenly, do not worry, the copy continues to work unless the device freezes. As soon as it is, transfer it to the computer. You will find the copy in the folder MIUI → backup → AllBackup → daymonthyear_hourminuteseconds (it is a folder with numbers in the name, you have to move the whole folder, without compressing it or anything).

Second step: Install TWRP (if not already installed)
https://xiaomi.eu/community/threads/howto-install-recovery-image.66211/ (main tutorial)
https://xiaomi.eu/community/threads...all-twrp-and-xiaomi-eu-roms-on-poco-f3.61624/ (extra info.)

Third step: Install the latest ROM available if it is not already available. You can download it from here or directly on the device from the update section.

Fourth step: Install the .apk file that appears in the banner that pops up when you open the Update section.

Fifth step: Delete ALL data from the Google Play application (yes, the app store) and reboot the device.

Sixth step: That's it. Everything should work perfectly.


(if anyone sees an error, please correct me)

(if something is badly written or translated, forgive me, my phone is in Spanish)
 
Last edited:
Hi folks, I've just updated my Redmi Note 10 Pro to the latest FW on my old DELL laptop after I tried to do it on my new Zenbook Pro 16X OLED (UX7602, 12th Gen Intel) and failed. After launching nothing happened, only "Waiting for the phone" message on the screen. On DELL I did it without any problem for the first try. Anybody could help me what could be the issue?
 
Good time of day.
After updating the firmware xiaomi.eu for sweet_k6a (when the module mechanism for replacing fingerprints and passing Play Integrity was introduced), the Swoo payment application stopped working.
I'm inclined to think that the fact is that the application detects that the bootloader is unlocked, since, for example, the Momo application reports this.
I will clarify that at the moment when the firmware xiaomi.eu all patches for passing Play Integrity were completely removed, the application worked properly (and before that, too), despite the fact that Play Integrity was held only at the Basic level
Upd.: I have no Magisk or KSU installed

Can you tell me what to do? I am ready to help solve the problem and try all possible solutions and test firmware builds (but not return a stock ROM with a bootloader lock)

Screenshot_2023-12-07-21-39-36-662_com.cardsmobile.swoo-edit.jpg
Screenshot_2023-12-07-21-42-07-654_io.github.vvb2060.mahoshojo.jpg
Screenshot_2023-12-07-21-42-22-684_krypton.tbsafetychecker.jpg
Screenshot_2023-12-07-21-42-32-038_krypton.tbsafetychecker.jpg

Upd.: Key Attestation results:
Screenshot_2023-12-08-03-04-46-676_io.github.vvb2060.keyattestation.jpg
 
Last edited:
Hi everyone. First of all, thank you dev's for your hard work.
I've got a POCO F2 Pro, is my third phone using these roms. I am currently having several errors similar to other members.
First (4th of December) i flashed the new rom with XiaomiEUModule, remove Magisk and modules and wallet worked again, could add a N26 card.
To solve Netflix problem i cleared store, google service and framework data, reboot phone and it was solved. But when I tried to add cards it wouldn't let me do it anymore, in the last step, when contacts to the bank, shows me this message "Couldn't finish setup to pay in stores. Something went wrong during setup. You can give it another try later", or "Not network connection", depending of the bank (ING, N26, BBVA). Thinking it was a problem with the cards, i added them to my wife's phone without any problem.
Next day i installed the update of the module but nothing changes. I realized that notifications from messaging applications not showing up and weather app not working fine.
Reflashed rom, cleared google data, checked integrity (it's ok), but nothing changed.
Any ideas? Maybe i need to do a clean flash.

Thanks in advance.
 
Can i please get a link to where is the official thread with installation steps and getting the wallet to work and update on the APK that fixes it?
This is the 3rd or so time i chase the issue and stumble upon a resopnse with a solution.
 
Last edited:

TAOYAO_V14.0.8.0.TLIMIXM​

Google Play
The device is not certified
Applications are not updated
 
There is no app update in the Play Market store (endless download ring). In addition, it says in the settings that the device is not certified. Updated from 14.0.7.0 to 14.0.8.0
Could be plenty of reasons for that, I don't see how it's a ROM issue if we can't reproduce it.
We're not Google support.
 
Could be plenty of reasons for that, I don't see how it's a ROM issue if we can't reproduce it.
We're not Google support.
Google Play - Device is not certified
Is this a Google problem, not a ROM? Strange. This all happened after the update to 14.0.8.0...
 
Is the module also working on rooted phone?
Yes, as long as you add Google Play services (all processes, especially ".unstable") into the DenyList, and DenyList is enforced.

After updating the module, do I need to clear the cache of certain applications and do something else?
Google Play services and Google Play Store, in your case.
 
  • Like
Reactions: k3067e3
Yes, as long as you add Google Play services (all processes, especially ".unstable") into the DenyList, and DenyList is enforced.


Google Play services and Google Play Store, in your case.
Cache and data? Or is it just the cache?
 
Yes, as long as you add Google Play services (all processes, especially ".unstable") into the DenyList, and DenyList is enforced.


Google Play services and Google Play Store, in your case.
Just google play services or anything else? i mean into deny list if rooted
 
Good night.. I would like to understand if the problem I have in payments with application through the bank account, is associated with all this information that is behind?!
 
Hi , latest stable. How could remove the word clock ? And the weather icon stays the same never changes is that normal?

Thanks
 

Attachments

  • IMG_20231207_221310.jpg
    IMG_20231207_221310.jpg
    368.6 KB · Views: 180
Just google play services or anything else? i mean into deny list if rooted
Google Play services is usually enough. Sometimes Google Play Store too, if you can't find some common apps (like Netflix).
And, of course, any banking apps that give you hard time due to the root.
 
  • Like
Reactions: k3067e3
Status
Not open for further replies.

Similar threads

  • Locked
HyperOS 1.0 24.7.1
Replies
54
Views
44K
Replies
51
Views
44K
  • Locked
HyperOS 1.0 24.7.15/17
Replies
87
Views
53K