Yes, has that phantom touches before, but rarely, no such till now, will see in future
[ROM][KK][4.4][2014-05-18] CyanogenMod 11.0
- Thread starter M1cha
- Start date
m1cha i don't have atmel (i think, because i dont have phantom touches but simple poor quality of touch) but very good work.
Giangiva
Members
- 22 Jul 2013
- 174
- 28
I'll do it tomorrow morning.
Thank you for all your efforts!
Inviato dal mio MI 2 utilizzando Tapatalk
- 29 May 2011
- 1,747
- 297
don't seems accurate at all. Not phantom touch, simple sometimes miss the touch (especially in the browser) and on keyboard you see very well the mistake.
Well this ROM is running very smoothly for me : )
Much more so than ROMs based on Ivan's kernel.
The battery life isn't as good, but I think it's better than it used to be, will have to test further.
Using apps like CPU Spy Reborn, it is evident that this ROM idles frequently on the maximum 1728 MHz frequency.
On Ivan's ROM the lower frequencies are the ones that are used the most.
Also, the battery temp sensor reports the correct temp, last time I've used this ROM it was 10c higher than it should be for some reason.
So cheers on that : )
Sent from my MI 2 using Tapatalk
Much more so than ROMs based on Ivan's kernel.
The battery life isn't as good, but I think it's better than it used to be, will have to test further.
Using apps like CPU Spy Reborn, it is evident that this ROM idles frequently on the maximum 1728 MHz frequency.
On Ivan's ROM the lower frequencies are the ones that are used the most.
Also, the battery temp sensor reports the correct temp, last time I've used this ROM it was 10c higher than it should be for some reason.
So cheers on that : )
Sent from my MI 2 using Tapatalk
- 29 May 2011
- 1,747
- 297
Giangiva
Members
- 22 Jul 2013
- 174
- 28
Dmesg, immediately after boot and sim's pin code inserted, with the working cm11 kernel (your latest build 19/03).
- 29 May 2011
- 1,747
- 297
you don't have atmel touchscreen. you have a synaptics.
I've disabled this touchscreen in my test kernels for testing that's why it doesn't work for you.
Anyway I'm happy that it's not a problem of the new driver and you shouldn't have ghost touches btw.
Dlbg2013
Members
- 4 Jan 2013
- 9
- 11
Hello,
thanks for your great work on cm11.
I installed your latest cm11 build and it works so far ok.
Only issues I encounter is that it says "wlan activating" but wlan is never activated and it's also not possible do cancal this.
And I also get the message "Clock has been terminated".
I have TDB enabled and have oon system1 WIUI and on system2 CM11.
Hope someone can give me some advice
I have a Mi2 32GB
thanks for your great work on cm11.
I installed your latest cm11 build and it works so far ok.
Only issues I encounter is that it says "wlan activating" but wlan is never activated and it's also not possible do cancal this.
And I also get the message "Clock has been terminated".
I have TDB enabled and have oon system1 WIUI and on system2 CM11.
Hope someone can give me some advice
I have a Mi2 32GB
Giangiva
Members
- 22 Jul 2013
- 174
- 28
Thanks for your investigation.
Unfortunately I DO have ghost touches and, at times, they are very bad... :-(
Inviato dal mio MI 2 utilizzando Tapatalk
- 29 May 2011
- 1,747
- 297
can you post your logs please? maybe the new wlan config causes some problems on your device.Hello,
thanks for your great work on cm11.
I installed your latest cm11 build and it works so far ok.
Only issues I encounter is that it says "wlan activating" but wlan is never activated and it's also not possible do cancal this.
And I also get the message "Clock has been terminated".
I have TDB enabled and have oon system1 WIUI and on system2 CM11.
Hope someone can give me some advice
I have a Mi2 32GB
- 29 May 2011
- 1,747
- 297
small update for the touchscreen driver test:
http://d-h.st/GTU
I've changed the config because there where problem with press&hold(he reported pinching when doing that)
http://d-h.st/GTU
I've changed the config because there where problem with press&hold(he reported pinching when doing that)
Dlbg2013
Members
- 4 Jan 2013
- 9
- 11
bzz11g
Members
- 14 Jul 2011
- 16
- 13
hello M1cha! i brick my stock screen on mi2s and buy new from aliexpress with very big sensitivity on dirt and water, my screen must be always clear for good working, so when i found your touchscreen fix i'm very surprised and test it now, 1st patсh working very very bad, i can't use my device, screen did not listen, and then touch stopped working completely, reboot did not help, had to fall back on the stock kernel, everything works again as needed, after that i test 4 patсh and first time it working very good, but after 20 minutes it repeats itself as the first patch...
So Please do not add this patch in the main core, releasing it separately, because I and the same "lucky man" like me, with sensitive screens, will not be able to continue use your build of cm11
I hope you understand my bad english
So Please do not add this patch in the main core, releasing it separately, because I and the same "lucky man" like me, with sensitive screens, will not be able to continue use your build of cm11
I hope you understand my bad english
How want CM_11 finsh Stable hurry....m1cha you build rom under the Snapshot or Nightly?
Last edited:
linuxx
Members
- 6 Jul 2013
- 1,436
- 222
Why? The next monthly will be released from cm team, it's useless this request
And no eta
Sent from my MI 2 using Tapatalk
Similar threads
- Poll
