HyperOS 2.0 HyperOS 2.0 STABLE RELEASE

[imelzi]

Hyper Os 2 on my mi 11 (venus) doesn't work, after updating the phone restarts and gets stuck in "fastboot", any idea how to fix this? I updated from the updater app

 

[Kacper Skrzypek]

Hyper Os 2 on my mi 11 (venus) doesn't work, after updating the phone restarts and gets stuck in "fastboot", any idea how to fix this? I updated from the updater app

Flash OS1 for now. We are trying to investigate this issue.

 

[Leo Leo]

i am so happy to see star update for mi 11 ultra, been trying to download it but i can't seem to find it in the links

 

[Igor Eisberg]

i am so happy to see star update for mi 11 ultra, been trying to download it but i can't seem to find it in the links

Read the last few replies and you'll get the idea.

 

[Leo Leo]

Same here.
Even though it shows FASTBOOT on screen I dont think its actually in fastboot mode (maybe its overwritten the boot/recovery img) as even just using power button or power button plus Up/Down button it still shows FASTBOOT logo. PC doesnt recognise it but it can recognise my old Mi 9 so its not a driver/adb issue.
I cant even turn it off
If PC cant recognise it not sure there is much chance of recovering a working phone :-(

try to press and hold the power button for a minute

 

[Leo Leo]

Flash OS1 for now. We are trying to investigate this issue.

thank you very much

 

[Leo Leo]

Read the last few replies and you'll get the idea.

yea i just got it now, wasn't following serially

 

[Igor Eisberg]

For device like Aurora Global should replace modem and modem firmware from latest global?

Thank you

Xiaom 14 Ultra Global doesn't come with an eSIM, so it won't make much of a difference.

 

[vlv_pow]

The 2.0.3 update on redwood was unsuccessful. during installation there were errors about the installer not seeing the size of the phone partitions. For example, "Warning: skip copying vendor_boot_ab image avb footer (vendor_boot_ab partition size: 0, vendor_boot_ab image size: 100663296).".

 

[vlv_pow]

The 2.0.3 update on redwood was unsuccessful. during installation there were errors about the installer not seeing the size of the phone partitions. For example, "Warning: skip copying vendor_boot_ab image avb footer (vendor_boot_ab partition size: 0, vendor_boot_ab image size: 100663296).".

I will try to install 1.15.0, then I will replace images from 2.0.3 in the same installer.

 

[vlv_pow]

I will try to install 1.15.0, then I will replace images from 2.0.3 in the same installer.

I'm stupid, 1.15.0 with the same warnings is installed but runs eventually. So it's not the installer....

 

[MotleyCrue]

Error while installing rom. Installation stuck for 10 minutes and cannot reboot. XuanYuan Mi 15 Ultra.

 

[Igor Eisberg]

Error while installing rom. Installation stuck for 10 minutes and cannot reboot. XuanYuan Mi 15 Ultra.


View attachment 55424

Force reboot to fastboot using the buttons. Either your USB cable or USB port is unstable.

 

[MotleyCrue]

Edit: CMD closed unexpectedly, and after running Windows_install_update.bat again, got 10 warnings identycal, and finally rebooted.

Still had to update modem manually after rom update.

 

[tutun0567]

I installed Hyperos 2.0 lisa Rom .
But after flash mobile does not on open and showing MI logo and goes to fastbooting page again and again

 

[tzifosf1]

Same here for REDWOOD, after flashing HOS2; in a Fastboot bootloop. Went back to the latest HOS1and all are fine. Waiting for the developers to fix the issue and publish a new HOS2 rom.

 

[Sem_e]

Has someone tried to clean flash the new version to see if it still fastboot loops even in that way? Now it doesn't show the new update in the settings. They removed the OTA.

 

[tutun0567]

Has someone tried to clean flash the new version to see if it still fastboot loops even in that way? Now it doesn't show the new update in the settings. They removed the OTA.

After clean flashing same issue had done it gone in boot screen again and again

 

[vlv_pow]

When installing via twrp it just hangs on the logo

 

[Igor Eisberg]

Same here for REDWOOD, after flashing HOS2; in a Fastboot bootloop. Went back to the latest HOS1and all are fine. Waiting for the developers to fix the issue and publish a new HOS2 rom.

Prepare some popcorn because you might have to wait for a while.
There's no issue detected at this time, and a tester we've been working with cannot gain logcat during boot time, which is highly unusual.
And for those who claim that we "don't test before release", I'll point something out:
I have a single device that got the OS2 based on Android 14 lately - Redmi K50 Pro, and it works perfectly.
But - it's a Dimensity device and the codebase is different from Snapdragon.
The rest of our devices got Android 15, so they can't be used to investigate this issue.
We delayed the releases while we waited for the ROM for Redmi K50 Pro to be released, it was our only point of reference.
There aren't many options at our disposal.

 

[RhubarbPie555]

try to press and hold the power button for a minute

Thanks for the advice but it doesn't work, holding in the power button just cycles the mi 11 to the mui logo and then fastboot logo, then goes back to mui logo again then fastboot.it doesn't matter if I press power on it's own or power and up/down keys it always ends up with the fastboot logo which suggests maybe a corrupt or incorrectly applied wrong partition.

Someone mentioned installing fastboot driver from mui unlock application would fix a 'destroyed' mi 11 of another user and I've already responded to that that I have a mi 9 which as soon as I put in fastboot mode my pc detects it immediately, swap to my mi 11 and it isn't being detected at all and I use same process, same cable, and same pc.

I accept there is always a risk of using roms, I also appreciate all the time and effort the developers put into providing these, but this seems to be an issue affecting multiple device models.

Hopefully a solution is found soon but from later posts it looks like it's going to take some time

 

[Fleku]

Hi, since a certain update I have a problem with Wi-Fi
the connection is unstable, disconnects, sometimes there is a connection but no internet access
Xiaomi 14 pro-SHENNONG.
Has anyone encountered the same, is there a solution?

 

[Baba Voss]

Prepare some popcorn because you might have to wait for a while.
There's no issue detected at this time, and a tester we've been working with cannot gain logcat during boot time, which is highly unusual.
And for those who claim that we "don't test before release", I'll point something out:
I have a single device that got the OS2 based on Android 14 lately - Redmi K50 Pro, and it works perfectly.
But - it's a Dimensity device and the codebase is different from Snapdragon.
The rest of our devices got Android 15, so they can't be used to investigate this issue.
We delayed the releases while we waited for the ROM for Redmi K50 Pro to be released, it was our only point of reference.
There aren't many options at our disposal.

This Same issue happned before with Redmi Note 12 Pro 4G... that 1.0.15 base was doing the same .... could it be the same error? hopefully these are fixed soon and THGMIXM 1.0.16 can be install without revised and re uploads .

 

[AlexJ]

You don't have Fastboot drivers installed. Run Mi Unlock > gear icon > Check button near Drivers.

Thanks bro, thanks to you I got my phone working but I lost all my data and now have to set up the phone again.

 

[AlexJ]

i am so happy to see star update for mi 11 ultra, been trying to download it but i can't seem to find it in the links

Don't update your Mi 11 Ultra to HyperOS 2. The update has a bug.