HyperOS 2.0 HyperOS 2.0 STABLE RELEASE


Thanks for the advice but it doesn't work, holding in the power button just cycles the mi 11 to the mui logo and then fastboot logo, then goes back to mui logo again then fastboot.it doesn't matter if I press power on it's own or power and up/down keys it always ends up with the fastboot logo which suggests maybe a corrupt or incorrectly applied wrong partition.

Someone mentioned installing fastboot driver from mui unlock application would fix a 'destroyed' mi 11 of another user and I've already responded to that that I have a mi 9 which as soon as I put in fastboot mode my pc detects it immediately, swap to my mi 11 and it isn't being detected at all and I use same process, same cable, and same pc.

I accept there is always a risk of using roms, I also appreciate all the time and effort the developers put into providing these, but this seems to be an issue affecting multiple device models.

Hopefully a solution is found soon but from later posts it looks like it's going to take some time
I installed my drivers from MiFlash (https://new.c.mi.com/global/miuidownload/detail/guide/1) by selecting a device and going to the guide. It has a drivers tab or at the first start it downloads them all.
 
is this one "XUANYUAN_OS2.0.113.0.VOACNXM" safe to install on a 15 Ultra?
Or does this have this fastboot problem as well?
And where do I finde the changelogs of China Roms? Thanks
 
  • Like
Reactions: carR9
I installed my drivers from MiFlash (https://new.c.mi.com/global/miuidownload/detail/guide/1) by selecting a device and going to the guide. It has a drivers tab or at the first start it downloads them all.
Drivers were already installed on my pc as my old mi 9 can be seen as android bootloader in device manager. My updated hyper os 2 mi 11 isn't recognised at all, screen on phone says fastboot but I don't actually believe it's in fastboot mode as it just boots to fastboot logo no matter which buttons are pressed or held down.

Maybe I'm just one of the unlucky ones who can't reflash older hos 1 rom
 
Prepare some popcorn because you might have to wait for a while.
There's no issue detected at this time, and a tester we've been working with cannot gain logcat during boot time, which is highly unusual.
And for those who claim that we "don't test before release", I'll point something out:
I have a single device that got the OS2 based on Android 14 lately - Redmi K50 Pro, and it works perfectly.
But - it's a Dimensity device and the codebase is different from Snapdragon.
The rest of our devices got Android 15, so they can't be used to investigate this issue.
We delayed the releases while we waited for the ROM for Redmi K50 Pro to be released, it was our only point of reference.
There aren't many options at our disposal.
Maybe it is not related and I'm just talking incompetent but could be Google security updates the problem? (A14/Snapdragon)?
 
Drivers were already installed on my pc as my old mi 9 can be seen as android bootloader in device manager. My updated hyper os 2 mi 11 isn't recognised at all, screen on phone says fastboot but I don't actually believe it's in fastboot mode as it just boots to fastboot logo no matter which buttons are pressed or held down.

Maybe I'm just one of the unlucky ones who can't reflash older hos 1 rom
you might need to do EDL
 
Drivers were already installed on my pc as my old mi 9 can be seen as android bootloader in device manager. My updated hyper os 2 mi 11 isn't recognised at all, screen on phone says fastboot but I don't actually believe it's in fastboot mode as it just boots to fastboot logo no matter which buttons are pressed or held down.

Maybe I'm just one of the unlucky ones who can't reflash older hos 1 rom
Try to check Device Manager if there are faulty drivers when connected
 
Try to check Device Manager if there are faulty drivers when connected
Confirmed drivers were installed correctly by plugin in mi 9 in fastboot mode before trying mi 11.

Would be so much easier if it had been a driver issue. Time to bite the bullet I think and order mi 15 which is currently on special offer till end of this month
 
  • Like
Reactions: Sem_e
is this one "XUANYUAN_OS2.0.113.0.VOACNXM" safe to install on a 15 Ultra?
Or does this have this fastboot problem as well?
And where do I finde the changelogs of China Roms? Thanks
(System)
Fixed some resolution issues in photo and video scenes and merged into the March 2025 security patch to improve system security

(Theme)
Fixed a theme store crash issue in some scenes

(Camera)
Optimized the shutter logic of the ultra-telephoto lens to further improve the success rate of shots
Optimized the consistency of the multi-camera zoom preview screen
 
Thank you very much for the fresh update Xiaomi 15 Ultra. You don't have to do any hocus-pocus with the modem. It works right away and the Samsung watch ultra was installed right away, which I couldn't do before. Many thanks to the creators.
 
I have Xiaomi 14 2.0.105.0.0VNCCNXM is the new update 107 safe? Judging by the latest comments, I'm afraid to update as usual via a PC plug.
 
Is using 3rd party launchers with button navigation broken for anyone else on the latest eu rom? It was working fine last month on the previous eu OS 2 version but now it just insta switches back to miui home
 
Hi, since a certain update I have a problem with Wi-Fi
the connection is unstable, disconnects, sometimes there is a connection but no internet access
Xiaomi 14 pro-SHENNONG.
Has anyone encountered the same, is there a solution?
No problem with wifi, work well on my shennong using xiaomi.eu_SHENNONG_OS2.0.109.0.VNBCNXM_15.zip
 

Similar threads

  • Locked
HyperOS 1.0 24.7.1
Replies
54
Views
49K
Replies
51
Views
58K
  • Locked
HyperOS 1.0 24.7.15/17
Replies
87
Views
81K
  • Locked
HyperOS 1.0 24.7.8/12
Replies
50
Views
39K