MIUI 12.1 20.8.6/7


Do you like this MIUI version?

  • Total voters
    173
Status
Not open for further replies.
Hello all, I have a recently unlocked and rooted Ginkgo. Just installed the "xiaomi.eu_multi_HMNote8_20.8.6_v12-10.zip", installed all my apps, and everything's working fine... until I tried to make the first backup via Orange Fox Recovery.
The backup fails in error and after looking at the log file, I see that the responsible is the file "extm_file" which is inside "/data/extm" folder:

I:addFile '/data/extm' including root: 1
==> set selinux context: u:eek:bject_r:extm_data_file:s0
failed to lookup tar policy for '/data/extm' - '6656cb974e8977e3'
I:Error adding file '/data/extm' to '/data/media/0/Fox/BACKUPS/19ec0bd6/2020-08-09--11-08-59/data.f2fs.win002'
Error creating backup.

Well, I've deleted the file, even deleted the folder "extm" itself, but every time the phone is rebooted, the folder and the file are recreated !!
(btw the file "extm_file" has 500 MB)

Please, does anyone ever faced such a situation ? Any clue ?

Thanks
 
crewdk said:
Are other sensors works fine? For example is autobrightness react on light level and so on?
Click to expand...

No. Other sensors doesn't work. I think I found the reason. If you flash the rom with battery saver ON, you will lose all sensors. Reflash without battery saver repair this. May it help someone in the future.
 
  • Like
Reactions: LOLO9393 and Putti
Maesegallardo said:
No. Other sensors doesn't work. I think I found the reason. If you flash the rom with battery saver ON, you will lose all sensors. Reflash without battery saver repair this. May it help someone in the future.
Click to expand...
In my case it was erased by some case persist partition, so I had to reflash it separately.
 
do i have to do anything more when up this rom from weakly android 10 to android 11 or just install and wipe davik ?
thanks
 
  • Like
Reactions: damia
Mr. Orange said:
Well, as I mentioned before. It's not like I have a sense for those kind of software shenanigans.
If it's just extracting the NON-HLOS.bin file from the ROM Zip, putting it into my devices main storage area and then just normally flashing with TWRP as any other files, then ok yes...I can do that and provide feedback.

But if it requires more finesse, then some guidance would be appreciated.

Cheers,
Orange.
Click to expand...
You install it via "fastboot flash modem..." instruction, but you need to get the modem file first and unless you upack EU rom it is needed to get it from a fastboot rom.
I am downloading MIUI12 EEA fastboot rom in order to check what modem.bin is in use.
Dowload takes long!
 
katerpanne said:
You can try a dirty install. Install the new rom over the old one in twrp. In some cases you have to format data if its failed. If you have magisk installed read my thread

Click to expand...

tried multiple times to install magisk (also trying with canary magisk) but android 11 seems to not recognize. im on mi10. all work properly, bit laggy but all good. Only thing is this. magisk not install
 
  • Like
Reactions: Mali2, gogua and davezme
davezme said:
tried multiple times to install magisk (also trying with canary magisk) but android 11 seems to not recognize. im on mi10. all work properly, bit laggy but all good. Only thing is this. magisk not install
Click to expand...

This forum has a search function… try my thread

And please dont only write… it is not working. Tell us your phone, rom, magic version and what you did in detail.

 
Mr. Orange said:
Well, as I mentioned before. It's not like I have a sense for those kind of software shenanigans.
If it's just extracting the NON-HLOS.bin file from the ROM Zip, putting it into my devices main storage area and then just normally flashing with TWRP as any other files, then ok yes...I can do that and provide feedback.

But if it requires more finesse, then some guidance would be appreciated.

Cheers,
Orange.
Click to expand...
Exactly like that, but in TWRP you should choose to flash an Image rather than a ZIP.
 
  • Like
Reactions: Mr. Orange
To go from version 20.7.9 eu weekly to 20.8.7 based on Android 11 can I do a wipe data or do I have to do a format data?
I have a poco F2 Pro

Inviato dal mio POCO F2 Pro utilizzando Tapatalk
 
katerpanne said:
This forum has a search function… try my thread

And please dont only write… it is not working. Tell us your phone, rom, magic version and what you did in detail.

Click to expand...

Xiaomi mi 10 global version
8/256 GB
Rom xiaomi.eu lastest with Android 11
Trying to use magisk via magisk manager canary version and when i flash the zip file and Then reboot and i go to magisk app It seems that It isn't rooted.
Then i make a boot.img patched by magisk (canary version) and flashed via adb and same result. Then i flashed the same patched boot.img with twrp and nothing.

You want some other Infos ? Is obvious that the method not work. Not work means not work in any way you try to use it.
 
davezme said:
Xiaomi mi 10 global version
8/256 GB
Rom xiaomi.eu lastest with Android 11
Trying to use magisk via magisk manager canary version and when i flash the zip file and Then reboot and i go to magisk app It seems that It isn't rooted.
Then i make a boot.img patched by magisk (canary version) and flashed via adb and same result. Then i flashed the same patched boot.img with twrp and nothing.

You want some other Infos ? Is obvious that the method not work. Not work means not work in any way you try to use it.
Click to expand...

Ok, I did not installed the 11 version. So I think you are right. It is not working. Perhaps I will try it. Have a nice sunday :)
 
  • Like
Reactions: davezme
Hello, for a few weeks, see months, the pedometer does not work on my mimax3.
 

Attachments

  • Screenshot_2020-08-09-12-09-30-373_com.miui.home.jpg
    Screenshot_2020-08-09-12-09-30-373_com.miui.home.jpg
    361 KB · Views: 284
Install by dirty flash latest rom on mi 10. Had to reboot 3 times till everything started to work ok. Little laggy I have to say for my 8/128GB I have, but this is something normal I guess for a beta Android version. Till now haven't found something not working in my mobile. Thank you for your work
 
  • Like
Reactions: ktsiaras
Having problems on Ginkgo with *no-support-for-this-app-on-this-forum* stucked on "processing hdr+" rolling back to 07/16 weekly with no problems

Enviado desde mi Redmi Note 8 mediante Tapatalk
 
scarfeiz said:
Hi!
I've the same issue with the network since two last builds. In my case TWRP can't flash a .bin file, another solution? thank you =)
Click to expand...
Just rename it to modem.img, makes no difference, it's just a primitive FAT image.
 
marcelooliver said:
Having problems on Ginkgo with *no-support-for-this-app-on-this-forum* stucked on "processing hdr+" rolling back to 07/16 weekly with no problems

Enviado desde mi Redmi Note 8 mediante Tapatalk
Click to expand...
It's not meant to be used with MIUI ROMs, so no support for it here.
 
Something wrong with recents on Davinci device (Mi9T) it doesnt show current using app when opening recents. There's some lag also. After reboot works again for a couple min.

And can u tell where i can find the update in root folder i downloaded via ota
 
Last edited:
I have enabled Don't Disturb for games on my phone, but it doesn't work, I was playing Brawl Stars and my game have to stop because I receive a call. Maybe it's a bug?
 
Status
Not open for further replies.

Similar threads

ingbrzy
  • Locked
HyperOS 1.0 24.7.28 (Final)
Replies
292
Views
337K
HyperOS
Igor Eisberg
Igor Eisberg
ingbrzy
  • Locked
HyperOS 1.0 24.7.1
Replies
54
Views
44K
HyperOS
Mistery88
M
ingbrzy
  • Locked
HyperOS 1.0 24.7.22/25/26
Replies
51
Views
45K
HyperOS
Ahaba
A
ingbrzy
  • Locked
HyperOS 1.0 24.7.15/17
Replies
87
Views
54K
HyperOS
KGVER
KGVER
ingbrzy
  • Locked
HyperOS 1.0 24.7.8/12
Replies
50
Views
35K
HyperOS
emre_66
E
Top Bottom
Back