MIUI 12.5 21.1.13/14


Do you like this MIUI version?

  • Total voters
    258
Status
Not open for further replies.
Installed on my Lavender.
Just found out 2 minor issues.
1. Rebooting taking too long (almost 10 minutes) for restart device for the first time. But it's normal when restart in 2 times (and more) after.
2. Screenshot from Quick Ball sometimes not working, need to tap 2/3 times.

But the rest went flawlessly.
Thank you
 
ingbrzy said:
WARNING FOR Mi 9 SE: After Android 11 update reboot to recovery causes reboot to Fastboot mode - TWRP disappears after update. To do update, boot your TWRP from fastboot mode, flash ROM and reboot to system.
Click to expand...

Hey mates, is there any chance to get rid of this problem with grus in future updates? or will this procedure (booting into trwp only from fastboot mode) persist as long as i´m going to use android11 updates on my MI9SE ?

And.. just to get this right:

I´m still on latest android10 xiaomi.eu, only AFTER the update to android11, when i´m trying to reboot to recovery (for updating, installing magisk and so on) it will cause reboot to fastboot mode and i have to enter/boot twrp with fastboot to update/install? everything else is working like i´m used to with my android10 xiaomi.eu FW?

Thanks a lot for your effort in developing and patience !
 
Mi 9T. Battery is a bit worse with this update. But expected with beta releases. Looking forward to the next one to test.
 
  • Like
Reactions: leobahlis
Good ROM!

But there is a few bugs I met:
1) UI navigation with geastures does not work.
Screenshot_2021-01-20-22-49-11-211_com.android.settings.jpg

2) Does not turn on Voice Match recognition with "Ok, Google" phrase. It turns off the toggle.
Screenshot_2021-01-21-16-15-08-722_com.google.android.googlequicksearchbox.jpg

3) Screen recording does not work. It indicates that the microphone is already busy - recording is not possible.
Screenshot_2021-01-21-16-05-17-841_com.android.settings.jpgScreenshot_2021-01-21-16-05-22-408_com.android.settings.jpg

Xiaomi Mi9T Pro
 
Last edited:
gentslava said:
Good ROM!

But there is a few bugs I met:

1) UI navigation with geastures does not work.

2) Does not turn on Voice Match recognition with "Ok, Google" phrase. It turns off the toggle.

3) Screen recording does not work. It indicates that the microphone is already busy - recording is not possible.

Xiaomi Mi9T Pro
Click to expand...
1) UI navigation with geastures does not work if you set a third-party launcher as default launcher => Set "MIUI Launcher" as default launcher until Xiaomi fix this nonsense on their Android 11 ROMs. ;)

2) Should work in the next Weekly ROM update by xiaomi.eu (today or tomorrow). :)

3) Maybe permission issue? I can't help for this one.
 
JimPanse said:
Hey mates, is there any chance to get rid of this problem with grus in future updates? or will this procedure (booting into trwp only from fastboot mode) persist as long as i´m going to use android11 updates on my MI9SE ?

And.. just to get this right:

I´m still on latest android10 xiaomi.eu, only AFTER the update to android11, when i´m trying to reboot to recovery (for updating, installing magisk and so on) it will cause reboot to fastboot mode and i have to enter/boot twrp with fastboot to update/install? everything else is working like i´m used to with my android10 xiaomi.eu FW?

Thanks a lot for your effort in developing and patience !
Click to expand...
Those of us who are using the Mi 10 (umi) have been dealing with a similar problem. It was sort of resolved with an earlier version of TWRP being included with the ROM. This version could not decrypt. If we want to decrypt, we have to boot from Fastboot with yet another version.
This now is a known issue with decryption and TWRP.
 
  • Like
Reactions: iron58p, JimPanse, katerpanne and 1 other person
I bought my phone on Dec 2020 and unlocked my bootloader on January because of the absurd waiting time. My device is Mi 10t Lite 5g, all works on EEA rom specifically the proximity sensor, after unlocking bootloader, proximity still works. After flashing the latest EU weekly on my device, everything works except for a few freeze on control center when Android R easter eggs is enabled. But i disabled it and it works. The only bummer in this ROM is I can't apply Video Wallpaper with sounds which i can on EEA Stable Rom. But the biggest bummer is the Proximity Sensor is not working, every other sensor works except the latter. I hope someone look into it.
I don't know if I need to provide a log file, and if i do, i don't know how, i hope someone is nice enough to teach me.
 

Attachments

  • Screenshot_2021-01-21-12-30-37-263_com.android.settings.jpg
    Screenshot_2021-01-21-12-30-37-263_com.android.settings.jpg
    185.5 KB · Views: 343
  • Screenshot_2021-01-21-12-30-52-156_com.miui.cit.jpg
    Screenshot_2021-01-21-12-30-52-156_com.miui.cit.jpg
    247.5 KB · Views: 326
For my mi10, the procimity sensor works a bit weird. I ~still don't know where it's located. Covering the upper part of the display some times activates the sensor other times not.. This has been happening ~since I got it (late December). I think there are some other people being unable to find the proximity sensor. Any help here?
@Mi10TLite maybe you have the same problem
 
Blastboom Strice said:
For my mi10, the procimity sensor works a bit weird. I ~still don't know where it's located. Covering the upper part of the display some times activates the sensor other times not.. This has been happening ~since I got it (late December). I think there are some other people being unable to find the proximity sensor. Any help here?
@Mi10TLite maybe you have the same problem
Click to expand...

I've tried covering the upper part of my phone and it doesn't work on mine. Only after I installed The weekly version of gauguin made my proximity sensor not working. But yeah.

Sent from my M2007J17G using Tapatalk
 
Hello guys, I have been wanting to buy MI 10 LITE 5G but it seem not to be available anywhere. I have just heard a rumour that it has been discontinued.IS IT TRUE?
 
  • Like
Reactions: PieroAnt
TaFN07 said:
Dirty flash to Mi9 with no errors but after clean cache and dalvik it restart in to twrp menu
Click to expand...
I did the installation from the updates application by choosing only the zip file without any wipe all automatically and I had no problems (MI9). Try reinstalling the rom
 
Mi10TLite said:
I bought my phone on Dec 2020 and unlocked my bootloader on January because of the absurd waiting time. My device is Mi 10t Lite 5g, all works on EEA rom specifically the proximity sensor, after unlocking bootloader, proximity still works. After flashing the latest EU weekly on my device, everything works except for a few freeze on control center when Android R easter eggs is enabled. But i disabled it and it works. The only bummer in this ROM is I can't apply Video Wallpaper with sounds which i can on EEA Stable Rom. But the biggest bummer is the Proximity Sensor is not working, every other sensor works except the latter. I hope someone look into it.
I don't know if I need to provide a log file, and if i do, i don't know how, i hope someone is nice enough to teach me.
Click to expand...

Do you have anything on the screen? (Tempered glass or hydrogel ?) I had a similar issue on my very old mi4 and the reason was the tempered glass. The prox. sensor worked fine after removing it and installed another one.
 
  • Like
Reactions: Yuppvanflupp
Just flashed the newest 21.1.20 for the Mi 9. Couldn't test it much but so far wireless charging works better.
 
  • Like
Reactions: dexterv
Status
Not open for further replies.

Similar threads

ingbrzy
  • Sticky
HyperOS 2.0 HyperOS 2.0 STABLE RELEASE
Replies
277
Views
107K
HyperOS
c4rdix
C
ingbrzy
  • Locked
HyperOS 1.0 24.7.28 (Final)
Replies
292
Views
280K
HyperOS
Igor Eisberg
Igor Eisberg
ingbrzy
  • Locked
HyperOS 1.0 24.7.1
Replies
54
Views
42K
HyperOS
Mistery88
M
ingbrzy
  • Locked
HyperOS 1.0 24.7.22/25/26
Replies
51
Views
39K
HyperOS
Ahaba
A
ingbrzy
  • Locked
HyperOS 1.0 24.7.15/17
Replies
87
Views
44K
HyperOS
KGVER
KGVER
Top Bottom
Back