Min2s has a ultrasonic sensor! So clean the sensor fine! Then he is working on each rom! I had the same problem!Is the proximity sensor working well on this rom on Mi Mix 2S????
Min2s has a ultrasonic sensor! So clean the sensor fine! Then he is working on each rom! I had the same problem!Is the proximity sensor working well on this rom on Mi Mix 2S????
Is the proximity sensor working well on this rom on Mi Mix 2S????
I have cleaned like this. I took a small pin and cleaned between the frame and the glass on the left side next to the speaker. After he was working fineMin2s has a ultrasonic sensor! So clean the sensor fine! Then he is working on each rom! I had the same problem!
I will try to do it.I have cleaned like this. I took a small pin and cleaned between the frame and the glass on the left side next to the speaker. After he was working fine
It works on mine mi5s... no bugs found for now...Mi5s: bluetooth doesn't work at all.
Any suggestions?
If this is the first time to flash the xiaomi.eu ROM, then you need to "FORMAT" (with the typed confirmation of "yes") to remove the encryption - this will wipe everything from the device, then you need to re-install everything, including the xiaomi.eu ROM .zip file.Mi8Pro: Just unlocked, installed twrp and flashed. First boot now over 15minutes and still not finished. How long to wait or what to do?
No, your data will stay.Will this update erease my data?(Bootloader is open).And if yes,how can i clone my data and where?
If this is the first time to flash the xiaomi.eu ROM, then you need to "FORMAT" (with the typed confirmation of "yes") to remove the encryption - this will wipe everything from the device, then you need to re-install everything, including the xiaomi.eu ROM .zip file.
You only need to do this for the first-time installation, not every time you update the ROM (there may be occasional requirements, such as change of Android base version, etc)
But if u flash, dont u "all" your data??
Or do you flashed without deleting data??
The changes made affect both 2.4GHz & 5GHz wifi, no idea why.
In last weeks EU when the wifi region was set to 'RU', that let my Mix1 use the lower frequencies for 5GHz hotspot as before, but it could not see 2.4GHz channels 12 & 13, for whatever reason.
When the wifi region is set to 'GB' as in this week's EU, you get somewhat different restrictions.
You have to try out which channels work for all your devices, set those in your routers, and thus cannot use the adaptive settings in your routers, as some devices will randomly not be able to connect.
It's all very ridiculous, imho, and makes you want to flash a previous version and stay with that.
Boot TWRP, plug to your PC and you will see the mounted tel volume to copy on, or do it though USB otghow do i get the rom copied to the device after formating?
Same problem for me
Unable to open file manager on pocophone f1, it say's disconnected.
https://xiaomi.eu/community/threads/file-explorer-fc.48295/post-464643I'm on 8.12.27 on poco f1 after clean flash.. It's impossible to add a Google account or start Google setup as play services keeps crashing and showing a black screen.. I did factory reset twice.. also file manager is still crashing
Then use an old build and stay on it. We didn't put those restrictions to begin with. Send a "thank you" card to your dear EU, who put the indoors restriction on most 5GHz channels in the first place. The GB region is used because it has all of the channels supported by the EU, plus some extra channels available in the GB that were blocked in the rest of EU.The changes made affect both 2.4GHz & 5GHz wifi, no idea why.
In last weeks EU when the wifi region was set to 'RU', that let my Mix1 use the lower frequencies for 5GHz hotspot as before, but it could not see 2.4GHz channels 12 & 13, for whatever reason.
When the wifi region is set to 'GB' as in this week's EU, you get somewhat different restrictions.
You have to try out which channels work for all your devices, set those in your routers, and thus cannot use the adaptive settings in your routers, as some devices will randomly not be able to connect.
It's all very ridiculous, imho, and makes you want to flash a previous version and stay with that.
Hello, I have discovered a small bug, both in this update, as in the previous one.
In the camera application, those who use a stick selfie with bluetooh control, no longer responds to the control to make a photo, but that goes from photo mode or video, short video mode, without option to make a photo or start a video recording.
I've fixed it back to version 8.12.13, where it works properly
.
ingbrzy
Did you know about this?
Are you going to give it a solution?
By the way my palo selfie is the original of Xiaomi
My phone is a Mi Mix 2s
Thank you and greetings!
https://xiaomi.eu/community/threads/file-explorer-fc.48295/post-464643
Then use an old build and stay on it. We didn't put those restrictions to begin with. Send a "thank you" card to your dear EU, who put the indoors restriction on most 5GHz channels in the first place. The GB region is used because it has all of the channels supported by the EU, plus some extra channels available in the GB that were blocked in the rest of EU.
Then ask UC Browser developers to fix it. When every other browser (except this one) work, it means that the problem is the browser, not the ROM.ucweb could not load the website on pocof1
Not our issue. We have a Mi MIX 2S tester and he doesn't have those issues.When will you fix the echo on incoming calls (hear yourself), put FirmWare 8.10.25 and the echo disappears, but the latest updates Xiaomi.EU 8.12.27 now the camera correctly... How frivolous!!! Phone xiaomi mi mix 2S
We use essential cookies to make this site work, and optional cookies to enhance your experience. Cookies are also used for ads personalisation