9.8.8/9/10/12


Do you like this MIUI version?


  • Total voters
    299
Status
Not open for further replies.
If you can enter inside your recovery it's very easy.
You need to go to advanced options --> File manager --> data --> adbm
In this folder you can find yours old magisk module.
Due to encryption it is impossible recognize specific module, and for this reasons you need delete all.
After this you return back to recovery home and flash again your magisk (I used 19.4 canary) .
After this the boot will work without problems .

Inviato dal mio MI 9 utilizzando Tapatalk
thank you man, this is very helpful,
it's working for me.
 
  • Like
Reactions: Belthazor86
Xiaomi mi 9 8/128gb (not global)
I have twrp-3.3.1-34-cepheus

I installed 9.8.8 dirty install

I noticed

The device is fast and smooth .. Camera is fully work
1.random reboot
2.NFC NOT WORKING
3.FC for message. Gallery.. find my device.. cloud ..
3.MAGISK work for hide root and root is ok
4. Titinium backup not fully work
 
Xiaomi mi 9 8/128gb (not global)
I have twrp-3.3.1-34-cepheus

I installed 9.8.8 dirty install

I noticed

The device is fast and smooth .. Camera is fully work
1.random reboot
2.NFC NOT WORKING
3.FC for message. Gallery.. find my device.. cloud ..
3.MAGISK work for hide root and root is ok
4. Titinium backup not fully work


magisk didn't work here. safety test net does not work. how did you work magisk for root?
 
T

To flash magisk after flash the update then reboot the system

.. BTW I RETURNED TO ANDROID P… DOWNGRAD

I also flashed the magisk after the flash of rom .. but nothing works banks
 

Attachments

  • Screenshot_2019-08-10-22-44-24-186_com.topjohnwu.magisk.jpg
    Screenshot_2019-08-10-22-44-24-186_com.topjohnwu.magisk.jpg
    196.1 KB · Views: 292
DOWNGRADE IS NOT RECOMMEND…


mi 9 8/128gb (not global)

After update I want to go back to p

U must have full previous backup

1. Install twrp in fastboot
twrp-3.3.1-34-

2. Format data or u can try OTG

3. TRY TO INSTALL 9.8.1 END BY ERROR 256 AND BOOTLOOP

4. PUT TWRP FOLDER OF PREVIOUS BACKUP IN OTG OR IN INTERNAL STORAGE
5. FULL RESTORE OF BACKUP .. BOOT SYSTEM VENDOR DATA .. ETC…

NOW UR PHONE IS RETURNED TO LIFE
 
How do I flash Magisk in this situation?
Well, I don't know how to flash it when having Q already installed, maybe you can do a clean flash like I did;
In TWRP > Format data > Reboot to recovery > Flash 9.8.8 and immediately install Magisk 19.3 > Wipe Dalvik cache.
 
9.8.9/10 RELEASED for some devices
- Fixed German language FC at battery stat
- Added App drawer option in MIUI Launcher

How to update Android 10 from 9.8.8 => 9.8.10 (TWRP
doesn't
support storage decryption)
Copy zip file to USB OTG, no wipe needed..
or
via ADB at TWRP, no wipe needed..
Code:
adb push xiaomi.eu_multi_MI9_9.8.10_v10-10.zip /storage
adb shell twrp install /storage/xiaomi.eu_multi_MI9_9.8.10_v10-10.zip
 
via ADB or USB OTG, no wipe needed..
Code:
adb push xiaomi.eu_multi_MI9_9.8.15_v10-10.zip /storage
adb shell twrp install /storage/xiaomi.eu_multi_MI9_9.8.15_v10-10.zip

WhenI try to install via adb, I go to TWRP and try with these code and my error just show up

C:\adb>adb push c:\adb\rom.zip /tmp/
error: device '(null)' not found

after that I try with adb sideload andjust show up this

C:\adb>adb sideload rom.zip
loading: 'rom.zip'
* cannot read 'rom.zip' *

What should I suppose to do?


By the way thanks for update and working hard
 
  • Like
Reactions: migueli2
WhenI try to install via adb, I go to TWRP and try with these code and my error just show up

C:\adb>adb push c:\adb\rom.zip /tmp/
error: device '(null)' not found

after that I try with adb sideload andjust show up this

C:\adb>adb sideload rom.zip
loading: 'rom.zip'
* cannot read 'rom.zip' *

What should I suppose to do?


By the way thanks for update and working hard
Just follow my instructions.. It's simple.. Life is too short for doing things complicated..
 
Just installed 9.8.9 on my Mi Max 3.

Have tried to activate the Ultra Battery Saver mode under Battery & Performance.
Once activated, it goes through the automatic adjustments for this mode and then the screen eventually goes back to the locked screen, except that the Ultra Battery saver is not activated.

Can anyone else confirm if you've been able to get this to work?
 
Version 9.8.9 on Redmi Note 7 is running fine now.
Also it feels faster than the previos Version.
Good Job Xiaomi.eu Team, Thank you.
 
Since 2-3 weekly versions the camera app goes in FC very easy on Mi 9 SE, just open the camera and quick switch the mode, for example open the camera, select night mode, then video, and bam, FC :-(
Bug is confirmed from some Italian user in the Mi 9 SE Italian telegram group.
 
  • Like
Reactions: nJoy-Android
How can I flash Magisk after flashing new 9.8.10? Twrp gives error mounting /system, as It is encrypted. Thank you!

Enviado desde mi MI 9 mediante Tapatalk
 
Last edited:
Copy zip file to USB OTG, no wipe needed..
or
via ADB at TWRP, no wipe needed..
Code:
adb push xiaomi.eu_multi_MI9_9.8.10_v10-10.zip /storage
adb shell twrp install /storage/xiaomi.eu_multi_MI9_9.8.10_v10-10.zip
As simple as it sounds, this works perfectly.
Used the USB OTG method, copied the 9.8.10 to my usb, enabled usb storage on TWRP, Flashed rom and then flashed Magisk.
Everything is alright, so far so good, thanks for finding this simple method!
 
Hello, I am using a MI 8 and have just uploaded (9.8.9) the update. Runs so well.
I noticed that in the Quick Snap mode but now a sound is played, although the camera sound is disabled.
How can the sound be disabled in Quick Snap mode?
 
Last edited:
Just installed 9.8.9 on my Mi Max 3.

Have tried to activate the Ultra Battery Saver mode under Battery & Performance.
Once activated, it goes through the automatic adjustments for this mode and then the screen eventually goes back to the locked screen, except that the Ultra Battery saver is not activated.

Can anyone else confirm if you've been able to get this to work?
Yes, also on 9.8.8 it doesn't work, you confirm it in 9.8.9 doesn't work too but on Official 9.8.9 beta it work perfectly
 
Status
Not open for further replies.

Similar threads

  • Locked
HyperOS 1.0 24.3.4
Replies
150
Views
42K
  • Locked
HyperOS 1.0 24.2.26
Replies
161
Views
49K
Replies
259
Views
66K
  • Locked
HyperOS 1.0 24.1.29
Replies
227
Views
120K