install Chrome beta then install chromeHello, for fifteen days I have installed on mi note 10 lite rom xiomi.eu 12, but I cannot download and install google crome from the play store. Anyone who can help me? Thank you
Flashing xiaomi.eu.zip rom And installing Magisk On mi note 10 lite [Guide]
Follow These methods (100% worked)
1. Boot to fastboot mode (power +vol down)
2. Extract ADB.rar to Drive C (Put the recovery and vbmeta files in ADB Folder) vbmeta link Below
3. Connect Phone To PC with USB Cable
4. from Start run CMD and type cd:\adb (pres enter) And type the following Commands :
fastboot devices
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot flash recovery Twrp-3.4.2B_toco_by.alex.msk1407.img (you can rename it to twrp.img) -LINK BELOW (Many Thanks To Alex msk)
fastboot reboot recovery
5. in twrp: wipe-> format data -> Type yes and tap enter (blue key)
6. in twrp: Boot to recovery (the phone is restarting to twrp again)
7. Copy xiaomi.eu rom and magisk.zip to phone
8. in twrp: install rom and magisk.zip
9. in twrp: Boot to recovery (the phone is restarting to twrp again)
10. in twrp: reboot system
11. Enjoy
ADB Link :
https://mega.nz/file/x8whTZSa#UP7Uvn...BHIDUa1lMnQXNI
TWRP Link :
https://mega.nz/file/0lAywALA#hx6U3_xgW3fpndSR0OWsRBxEncQ9CGQb2ezMOAldTRQ
vbmeta Link:
https://mega.nz/file/t4QmXACT#hqN6TNDt2mlAPrQUnClGtmaCvWJR3eO3TRAa8I4JhGk
Magisk Link :
https://mega.nz/file/Y4BEBILD#kre2gRvSJgwJRto1Yg-o7gblTRXAftUGxJSoKNowWkI
Hello,Hello guys, am I the only one stucked after following step by step all this procedure? no matter what, everything was installed, but once I reboot to system it get stucked to fastboot...! thanks
Is it possible that has something to do with the fact that I didn't wipe dalvik and cache after installing the rom and magisk? thanks
Hello,
If you tried to install Magisk on the 20.10.15 Weekly ROM version, that's the reason why your phone doesn't boot.
No known workaround to install Magisk yet (Maybe wait for an updated TWRP version).
Do steps 5 and 6 again but don't install Magisk (only the ROM). Reboot and check if your device correctly boot or not.I installed the xiaomi.eu_multi_MINote10LITE_V12.0.2.0.QFNMIXM_v12-10 with Magisk linked in the first post, is it wrong?
sorry but it's 4 years I don't play with recoveries so I'm a little bit back to noob doubts
thank you
P.S. I got the message "Unable to find partition for path '/metadata'
Stuck on MIUI logo with no transitions/effects at all on the imageDo steps 5 and 6 again but don't install Magisk (only the ROM). Reboot and check if your device correctly boot or not.
First boot can take up to 15 minutes.Stuck on MIUI logo with no transitions/effects at all on the image
...but after 30 mins I think I may start worrying... in the worst case scenario I'll flash a fastboot ROM, but I really don't understand why with the same procedure it does not work for meFirst boot can take up to 15 minutes.
Hello. can you tell me what twrp did you use? i can't install the rom. remains fixed on the miui logo. thank youHello, for fifteen days I have installed on mi note 10 lite rom xiomi.eu 12, but I cannot download and install google crome from the play store. Anyone who can help me? Thank you
You don't need to flash vbmeta again.With the latest twrp-3.4.0-14-toco-mauronofrio.img and the latest xiaomi.eu_multi_MINote10LITE_V12.0.2.0.QFNMIXM_v12-10.zip,
can i skip the fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img or it's a obligatory step to flash latest stable xiaomi.eu rom?
Because in the latest xiaomi.eu rom stable release, in firmware-update folder there's a vbmeta.img dated 9th of september and i suppose that already
disable verity during flash of rom stable.
Who can confirm?
Thx in advance
Therefore , can i skip the fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img?You don't need to flash vbmeta again.
How-to install xiaomi.eu ROM (first time - clean flash):Therefore , can i skip the fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img?
thx for this explanation, really kind!!How-to install xiaomi.eu ROM (first time - clean flash):
1) Use fastboot flash recovery twrp-3.4.0-14-toco-mauronofrio.img command
2) Use fastboot boot twrp-3.4.0-14-toco-mauronofrio.img command
3) In TWRP: "Wipe" > "Format Data" button (and type "yes" to confirm it)
4) Go back in main TWRP menu > "Reboot" > "Recovery"
5) After reboot in TWRP, you can install xiaomi.eu ROM
No problem.thx for this explanation, really kind!!
Some sketchy vendor roms will require you to first flash a stock fastboot rom before attemping to flash Xiaomi.eu Rom, else you will get stuck at MIUI logo after flashing Xiaomi.eu.thx for this explanation, really kind!!
Hello,Hi.I am trying to root my first phone for the last 5 years. I had put adb folder with all files on C:\ but when I open cmd as admin and write cd:\adb I get error "The filename, directory name, or volume label syntax is incorrect". I tried like on this youtube video but still the same. Can You help me?
We use essential cookies to make this site work, and optional cookies to enhance your experience. Cookies are also used for ads personalisation